msp432-pac/MSP432P401R.svd

<?xml version="1.0" encoding="utf-8"?>
<device schemaVersion="1.2" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd" >

   <vendor>Texas Instruments</vendor>
   <vendorID>ti.com</vendorID>
   <name>MSP432P401R</name>
   <version>3.230</version>
   <description>ARM Cortex-M4 MSP432P4xx Device</description>
   <licenseText>
\n
    Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/\n
\n
    Redistribution and use in source and binary forms, with or without\n
    modification, are permitted provided that the following conditions\n
    are met:
\n
    Redistributions of source code must retain the above copyright\n
    notice, this list of conditions and the following disclaimer.\n
\n
    Redistributions in binary form must reproduce the above copyright\n
    notice, this list of conditions and the following disclaimer in the\n
    documentation and/or other materials provided with the\n
    distribution.\n
\n
    Neither the name of Texas Instruments Incorporated nor the names of\n
    its contributors may be used to endorse or promote products derived\n
    from this software without specific prior written permission.\n
\n
    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS\n
    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT\n
    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR\n
    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT\n
    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,\n
    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT\n
    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,\n
    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY\n
    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE\n
    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n
\n
  </licenseText>
   <!-- Bus Interface Properties -->
   <addressUnitBits>8</addressUnitBits> 
   <width>32</width>
   <!-- -->
   <!-- Register Default Properties -->
   <size>32</size>
   <resetValue>0x00000000</resetValue>
   <resetMask>0xffffffff</resetMask>
   <!-- -->
   <peripherals>
    <peripheral>
        <name>TLV</name>
        <version>356.0</version>
        <description>TLV</description>
        <baseAddress>0x201000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x15C</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>TLV_CHECKSUM</name>
                  <displayName>TLV_CHECKSUM</displayName>
                  <description>TLV Checksum</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
            </register>
            <register>
                  <name>DEVICE_INFO_TAG</name>
                  <displayName>DEVICE_INFO_TAG</displayName>
                  <description>Device Info Tag</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x0000000b</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DEVICE_INFO_LEN</name>
                  <displayName>DEVICE_INFO_LEN</displayName>
                  <description>Device Info Length</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DEVICE_ID</name>
                  <displayName>DEVICE_ID</displayName>
                  <description>Device ID</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>HWREV</name>
                  <displayName>HWREV</displayName>
                  <description>HW Revision</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>BCREV</name>
                  <displayName>BCREV</displayName>
                  <description>Boot Code Revision</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ROM_DRVLIB_REV</name>
                  <displayName>ROM_DRVLIB_REV</displayName>
                  <description>ROM Driver Library Revision</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DIE_REC_TAG</name>
                  <displayName>DIE_REC_TAG</displayName>
                  <description>Die Record Tag</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x0000000c</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DIE_REC_LEN</name>
                  <displayName>DIE_REC_LEN</displayName>
                  <description>Die Record Length</description>
                  <addressOffset>0x20</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DIE_XPOS</name>
                  <displayName>DIE_XPOS</displayName>
                  <description>Die X-Position</description>
                  <addressOffset>0x24</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DIE_YPOS</name>
                  <displayName>DIE_YPOS</displayName>
                  <description>Die Y-Position</description>
                  <addressOffset>0x28</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>WAFER_ID</name>
                  <displayName>WAFER_ID</displayName>
                  <description>Wafer ID</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>LOT_ID</name>
                  <displayName>LOT_ID</displayName>
                  <description>Lot ID</description>
                  <addressOffset>0x30</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED0</name>
                  <displayName>RESERVED0</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x34</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED1</name>
                  <displayName>RESERVED1</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x38</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED2</name>
                  <displayName>RESERVED2</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x3C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>TEST_RESULTS</name>
                  <displayName>TEST_RESULTS</displayName>
                  <description>Test Results</description>
                  <addressOffset>0x40</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>CS_CAL_TAG</name>
                  <displayName>CS_CAL_TAG</displayName>
                  <description>Clock System Calibration Tag</description>
                  <addressOffset>0x44</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>CS_CAL_LEN</name>
                  <displayName>CS_CAL_LEN</displayName>
                  <description>Clock System Calibration Length</description>
                  <addressOffset>0x48</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOIR_FCAL_RSEL04</name>
                  <displayName>DCOIR_FCAL_RSEL04</displayName>
                  <description>DCO IR mode: Frequency calibration for DCORSEL 0 to 4</description>
                  <addressOffset>0x4C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOIR_FCAL_RSEL5</name>
                  <displayName>DCOIR_FCAL_RSEL5</displayName>
                  <description>DCO IR mode: Frequency calibration for DCORSEL 5</description>
                  <addressOffset>0x50</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED3</name>
                  <displayName>RESERVED3</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x54</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED4</name>
                  <displayName>RESERVED4</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x58</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED5</name>
                  <displayName>RESERVED5</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x5C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED6</name>
                  <displayName>RESERVED6</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x60</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOIR_CONSTK_RSEL04</name>
                  <displayName>DCOIR_CONSTK_RSEL04</displayName>
                  <description>DCO IR mode: DCO Constant (K) for DCORSEL 0 to 4</description>
                  <addressOffset>0x64</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOIR_CONSTK_RSEL5</name>
                  <displayName>DCOIR_CONSTK_RSEL5</displayName>
                  <description>DCO IR mode: DCO Constant (K) for DCORSEL 5</description>
                  <addressOffset>0x68</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOER_FCAL_RSEL04</name>
                  <displayName>DCOER_FCAL_RSEL04</displayName>
                  <description>DCO ER mode: Frequency calibration for DCORSEL 0 to 4</description>
                  <addressOffset>0x6C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOER_FCAL_RSEL5</name>
                  <displayName>DCOER_FCAL_RSEL5</displayName>
                  <description>DCO ER mode: Frequency calibration for DCORSEL 5</description>
                  <addressOffset>0x70</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED7</name>
                  <displayName>RESERVED7</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x74</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED8</name>
                  <displayName>RESERVED8</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x78</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED9</name>
                  <displayName>RESERVED9</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x7C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED10</name>
                  <displayName>RESERVED10</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x80</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOER_CONSTK_RSEL04</name>
                  <displayName>DCOER_CONSTK_RSEL04</displayName>
                  <description>DCO ER mode: DCO Constant (K) for DCORSEL 0 to 4</description>
                  <addressOffset>0x84</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>DCOER_CONSTK_RSEL5</name>
                  <displayName>DCOER_CONSTK_RSEL5</displayName>
                  <description>DCO ER mode: DCO Constant (K) for DCORSEL 5</description>
                  <addressOffset>0x88</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_CAL_TAG</name>
                  <displayName>ADC14_CAL_TAG</displayName>
                  <description>ADC14 Calibration Tag</description>
                  <addressOffset>0x8C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000005</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_CAL_LEN</name>
                  <displayName>ADC14_CAL_LEN</displayName>
                  <description>ADC14 Calibration Length</description>
                  <addressOffset>0x90</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC_GAIN_FACTOR</name>
                  <displayName>ADC_GAIN_FACTOR</displayName>
                  <description>ADC Gain Factor</description>
                  <addressOffset>0x94</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC_OFFSET</name>
                  <displayName>ADC_OFFSET</displayName>
                  <description>ADC Offset</description>
                  <addressOffset>0x98</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED11</name>
                  <displayName>RESERVED11</displayName>
                  <description>Reserved</description>
                  <addressOffset>0x9C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED12</name>
                  <displayName>RESERVED12</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xA0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED13</name>
                  <displayName>RESERVED13</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xA4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED14</name>
                  <displayName>RESERVED14</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xA8</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED15</name>
                  <displayName>RESERVED15</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xAC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED16</name>
                  <displayName>RESERVED16</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xB0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED17</name>
                  <displayName>RESERVED17</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xB4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED18</name>
                  <displayName>RESERVED18</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xB8</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED19</name>
                  <displayName>RESERVED19</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xBC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED20</name>
                  <displayName>RESERVED20</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xC0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED21</name>
                  <displayName>RESERVED21</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xC4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED22</name>
                  <displayName>RESERVED22</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xC8</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED23</name>
                  <displayName>RESERVED23</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xCC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED24</name>
                  <displayName>RESERVED24</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xD0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED25</name>
                  <displayName>RESERVED25</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xD4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RESERVED26</name>
                  <displayName>RESERVED26</displayName>
                  <description>Reserved</description>
                  <addressOffset>0xD8</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_REF1P2V_TS30C</name>
                  <displayName>ADC14_REF1P2V_TS30C</displayName>
                  <description>ADC14 1.2V Reference Temp. Sensor 30C</description>
                  <addressOffset>0xDC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_REF1P2V_TS85C</name>
                  <displayName>ADC14_REF1P2V_TS85C</displayName>
                  <description>ADC14 1.2V Reference Temp. Sensor 85C</description>
                  <addressOffset>0xE0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_REF1P45V_TS30C</name>
                  <displayName>ADC14_REF1P45V_TS30C</displayName>
                  <description>ADC14 1.45V Reference Temp. Sensor 30C</description>
                  <addressOffset>0xE4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_REF1P45V_TS85C</name>
                  <displayName>ADC14_REF1P45V_TS85C</displayName>
                  <description>ADC14 1.45V Reference Temp. Sensor 85C</description>
                  <addressOffset>0xE8</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_REF2P5V_TS30C</name>
                  <displayName>ADC14_REF2P5V_TS30C</displayName>
                  <description>ADC14 2.5V Reference Temp. Sensor 30C</description>
                  <addressOffset>0xEC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>ADC14_REF2P5V_TS85C</name>
                  <displayName>ADC14_REF2P5V_TS85C</displayName>
                  <description>ADC14 2.5V Reference Temp. Sensor 85C</description>
                  <addressOffset>0xF0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>REF_CAL_TAG</name>
                  <displayName>REF_CAL_TAG</displayName>
                  <description>REF Calibration Tag</description>
                  <addressOffset>0xF4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000008</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>REF_CAL_LEN</name>
                  <displayName>REF_CAL_LEN</displayName>
                  <description>REF Calibration Length</description>
                  <addressOffset>0xF8</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>REF_1P2V</name>
                  <displayName>REF_1P2V</displayName>
                  <description>REF 1.2V Reference</description>
                  <addressOffset>0xFC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>REF_1P45V</name>
                  <displayName>REF_1P45V</displayName>
                  <description>REF 1.45V Reference</description>
                  <addressOffset>0x100</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>REF_2P5V</name>
                  <displayName>REF_2P5V</displayName>
                  <description>REF 2.5V Reference</description>
                  <addressOffset>0x104</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>FLASH_INFO_TAG</name>
                  <displayName>FLASH_INFO_TAG</displayName>
                  <description>Flash Info Tag</description>
                  <addressOffset>0x108</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000004</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>FLASH_INFO_LEN</name>
                  <displayName>FLASH_INFO_LEN</displayName>
                  <description>Flash Info Length</description>
                  <addressOffset>0x10C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>FLASH_MAX_PROG_PULSES</name>
                  <displayName>FLASH_MAX_PROG_PULSES</displayName>
                  <description>Flash Maximum Programming Pulses</description>
                  <addressOffset>0x110</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>FLASH_MAX_ERASE_PULSES</name>
                  <displayName>FLASH_MAX_ERASE_PULSES</displayName>
                  <description>Flash Maximum Erase Pulses</description>
                  <addressOffset>0x114</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RANDOM_NUM_TAG</name>
                  <displayName>RANDOM_NUM_TAG</displayName>
                  <description>128-bit Random Number Tag</description>
                  <addressOffset>0x118</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x0000000d</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RANDOM_NUM_LEN</name>
                  <displayName>RANDOM_NUM_LEN</displayName>
                  <description>128-bit Random Number Length</description>
                  <addressOffset>0x11C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RANDOM_NUM_1</name>
                  <displayName>RANDOM_NUM_1</displayName>
                  <description>32-bit Random Number 1</description>
                  <addressOffset>0x120</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RANDOM_NUM_2</name>
                  <displayName>RANDOM_NUM_2</displayName>
                  <description>32-bit Random Number 2</description>
                  <addressOffset>0x124</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RANDOM_NUM_3</name>
                  <displayName>RANDOM_NUM_3</displayName>
                  <description>32-bit Random Number 3</description>
                  <addressOffset>0x128</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>RANDOM_NUM_4</name>
                  <displayName>RANDOM_NUM_4</displayName>
                  <description>32-bit Random Number 4</description>
                  <addressOffset>0x12C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>BSL_CFG_TAG</name>
                  <displayName>BSL_CFG_TAG</displayName>
                  <description>BSL Configuration Tag</description>
                  <addressOffset>0x130</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x0000000f</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>BSL_CFG_LEN</name>
                  <displayName>BSL_CFG_LEN</displayName>
                  <description>BSL Configuration Length</description>
                  <addressOffset>0x134</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>BSL_PERIPHIF_SEL</name>
                  <displayName>BSL_PERIPHIF_SEL</displayName>
                  <description>BSL Peripheral Interface Selection</description>
                  <addressOffset>0x138</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>BSL_PORTIF_CFG_UART</name>
                  <displayName>BSL_PORTIF_CFG_UART</displayName>
                  <description>BSL Port Interface Configuration for UART</description>
                  <addressOffset>0x13C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>BSL_PORTIF_CFG_SPI</name>
                  <displayName>BSL_PORTIF_CFG_SPI</displayName>
                  <description>BSL Port Interface Configuration for SPI</description>
                  <addressOffset>0x140</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>BSL_PORTIF_CFG_I2C</name>
                  <displayName>BSL_PORTIF_CFG_I2C</displayName>
                  <description>BSL Port Interface Configuration for I2C</description>
                  <addressOffset>0x144</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
            <register>
                  <name>TLV_END</name>
                  <displayName>TLV_END</displayName>
                  <description>TLV End Word</description>
                  <addressOffset>0x148</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x0bd0e11d</resetValue>
                  <resetMask>0xffffffff</resetMask>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>TIMER_A0</name>
        <version>356.0</version>
        <description>TIMER_A0</description>
        <baseAddress>0x40000000</baseAddress>
        <interrupt>
            <name>TA0_0_IRQ</name>
            <description>TA0_0 Interrupt</description>
            <value>8</value>
        </interrupt>
        <interrupt>
            <name>TA0_N_IRQ</name>
            <description>TA0_N Interrupt</description>
            <value>9</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>TAxCTL</name>
                  <displayName>CTL</displayName>
                  <description>TimerAx Control Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIFG</name>
                        <description>TimerA interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TAIE</name>
                        <description>TimerA interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TACLR</name>
                        <description>TimerA clear</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MC</name>
                        <description>Mode control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MC_0</name>
                                <description>Stop mode: Timer is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_1</name>
                                <description>Up mode: Timer counts up to TAxCCR0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_2</name>
                                <description>Continuous mode: Timer counts up to 0FFFFh</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_3</name>
                                <description>Up/down mode: Timer counts up to TAxCCR0 then down to 0000h</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ID</name>
                        <description>Input divider</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ID_0</name>
                                <description>/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_1</name>
                                <description>/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_2</name>
                                <description>/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_3</name>
                                <description>/8</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TASSEL</name>
                        <description>TimerA clock source select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TASSEL_0</name>
                                <description>TAxCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_3</name>
                                <description>INCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCTL[%s]</name>
                  <displayName>CCTL[%s]</displayName>
                  <description>Timer_A Capture/Compare Control Register</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000fff7</resetMask>
                  <fields>
                    <field>
                        <name>CCIFG</name>
                        <description>Capture/compare interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COV</name>
                        <description>Capture overflow</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>COV_0</name>
                                <description>No capture overflow occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>COV_1</name>
                                <description>Capture overflow occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUT</name>
                        <description>Output</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUT_0</name>
                                <description>Output low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUT_1</name>
                                <description>Output high</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCI</name>
                        <description>Capture/compare input</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CCIE</name>
                        <description>Capture/compare interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUTMOD</name>
                        <description>Output mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUTMOD_0</name>
                                <description>OUT bit value</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_1</name>
                                <description>Set</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_2</name>
                                <description>Toggle/reset</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_3</name>
                                <description>Set/reset</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_4</name>
                                <description>Toggle</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_5</name>
                                <description>Reset</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_6</name>
                                <description>Toggle/set</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_7</name>
                                <description>Reset/set</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAP</name>
                        <description>Capture mode</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAP_0</name>
                                <description>Compare mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAP_1</name>
                                <description>Capture mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SCCI</name>
                        <description>Synchronized capture/compare input</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SCS</name>
                        <description>Synchronize capture source</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SCS_0</name>
                                <description>Asynchronous capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SCS_1</name>
                                <description>Synchronous capture</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCIS</name>
                        <description>Capture/compare input select</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIS_0</name>
                                <description>CCIxA</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_1</name>
                                <description>CCIxB</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_2</name>
                                <description>GND</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_3</name>
                                <description>VCC</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CM</name>
                        <description>Capture mode</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CM_0</name>
                                <description>No capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_1</name>
                                <description>Capture on rising edge</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_2</name>
                                <description>Capture on falling edge</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_3</name>
                                <description>Capture on both rising and falling edges</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxR</name>
                  <displayName>R</displayName>
                  <description>TimerA register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCR[%s]</name>
                  <displayName>CCR[%s]</displayName>
                  <description>Timer_A Capture/Compare  Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAxR</name>
                        <description>TimerA register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxEX0</name>
                  <displayName>EX0</displayName>
                  <description>TimerAx Expansion 0 Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIDEX</name>
                        <description>Input divider expansion</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIDEX_0</name>
                                <description>Divide by 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_1</name>
                                <description>Divide by 2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_2</name>
                                <description>Divide by 3</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_3</name>
                                <description>Divide by 4</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_4</name>
                                <description>Divide by 5</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_5</name>
                                <description>Divide by 6</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_6</name>
                                <description>Divide by 7</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_7</name>
                                <description>Divide by 8</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxIV</name>
                  <displayName>IV</displayName>
                  <description>TimerAx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIV</name>
                        <description>TimerA interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>TAIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>TAIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_2</name>
                                <description>Interrupt Source: Capture/compare 1; Interrupt Flag: TAxCCR1 CCIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_4</name>
                                <description>Interrupt Source: Capture/compare 2; Interrupt Flag: TAxCCR2 CCIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_6</name>
                                <description>Interrupt Source: Capture/compare 3; Interrupt Flag: TAxCCR3 CCIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_8</name>
                                <description>Interrupt Source: Capture/compare 4; Interrupt Flag: TAxCCR4 CCIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_10</name>
                                <description>Interrupt Source: Capture/compare 5; Interrupt Flag: TAxCCR5 CCIFG</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_12</name>
                                <description>Interrupt Source: Capture/compare 6; Interrupt Flag: TAxCCR6 CCIFG</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_14</name>
                                <description>Interrupt Source: Timer overflow; Interrupt Flag: TAxCTL TAIFG; Interrupt Priority: Lowest</description>
                                <value>14</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>TIMER_A1</name>
        <version>356.0</version>
        <description>TIMER_A1</description>
        <baseAddress>0x40000400</baseAddress>
        <interrupt>
            <name>TA1_0_IRQ</name>
            <description>TA1_0 Interrupt</description>
            <value>10</value>
        </interrupt>
        <interrupt>
            <name>TA1_N_IRQ</name>
            <description>TA1_N Interrupt</description>
            <value>11</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>TAxCTL</name>
                  <displayName>CTL</displayName>
                  <description>TimerAx Control Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIFG</name>
                        <description>TimerA interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TAIE</name>
                        <description>TimerA interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TACLR</name>
                        <description>TimerA clear</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MC</name>
                        <description>Mode control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MC_0</name>
                                <description>Stop mode: Timer is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_1</name>
                                <description>Up mode: Timer counts up to TAxCCR0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_2</name>
                                <description>Continuous mode: Timer counts up to 0FFFFh</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_3</name>
                                <description>Up/down mode: Timer counts up to TAxCCR0 then down to 0000h</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ID</name>
                        <description>Input divider</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ID_0</name>
                                <description>/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_1</name>
                                <description>/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_2</name>
                                <description>/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_3</name>
                                <description>/8</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TASSEL</name>
                        <description>TimerA clock source select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TASSEL_0</name>
                                <description>TAxCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_3</name>
                                <description>INCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCTL[%s]</name>
                  <displayName>CCTL[%s]</displayName>
                  <description>Timer_A Capture/Compare Control Register</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000fff7</resetMask>
                  <fields>
                    <field>
                        <name>CCIFG</name>
                        <description>Capture/compare interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COV</name>
                        <description>Capture overflow</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>COV_0</name>
                                <description>No capture overflow occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>COV_1</name>
                                <description>Capture overflow occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUT</name>
                        <description>Output</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUT_0</name>
                                <description>Output low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUT_1</name>
                                <description>Output high</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCI</name>
                        <description>Capture/compare input</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CCIE</name>
                        <description>Capture/compare interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUTMOD</name>
                        <description>Output mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUTMOD_0</name>
                                <description>OUT bit value</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_1</name>
                                <description>Set</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_2</name>
                                <description>Toggle/reset</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_3</name>
                                <description>Set/reset</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_4</name>
                                <description>Toggle</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_5</name>
                                <description>Reset</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_6</name>
                                <description>Toggle/set</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_7</name>
                                <description>Reset/set</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAP</name>
                        <description>Capture mode</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAP_0</name>
                                <description>Compare mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAP_1</name>
                                <description>Capture mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SCCI</name>
                        <description>Synchronized capture/compare input</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SCS</name>
                        <description>Synchronize capture source</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SCS_0</name>
                                <description>Asynchronous capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SCS_1</name>
                                <description>Synchronous capture</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCIS</name>
                        <description>Capture/compare input select</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIS_0</name>
                                <description>CCIxA</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_1</name>
                                <description>CCIxB</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_2</name>
                                <description>GND</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_3</name>
                                <description>VCC</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CM</name>
                        <description>Capture mode</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CM_0</name>
                                <description>No capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_1</name>
                                <description>Capture on rising edge</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_2</name>
                                <description>Capture on falling edge</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_3</name>
                                <description>Capture on both rising and falling edges</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxR</name>
                  <displayName>R</displayName>
                  <description>TimerA register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCR[%s]</name>
                  <displayName>CCR[%s]</displayName>
                  <description>Timer_A Capture/Compare  Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAxR</name>
                        <description>TimerA register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxEX0</name>
                  <displayName>EX0</displayName>
                  <description>TimerAx Expansion 0 Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIDEX</name>
                        <description>Input divider expansion</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIDEX_0</name>
                                <description>Divide by 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_1</name>
                                <description>Divide by 2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_2</name>
                                <description>Divide by 3</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_3</name>
                                <description>Divide by 4</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_4</name>
                                <description>Divide by 5</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_5</name>
                                <description>Divide by 6</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_6</name>
                                <description>Divide by 7</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_7</name>
                                <description>Divide by 8</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxIV</name>
                  <displayName>IV</displayName>
                  <description>TimerAx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIV</name>
                        <description>TimerA interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>TAIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>TAIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_2</name>
                                <description>Interrupt Source: Capture/compare 1; Interrupt Flag: TAxCCR1 CCIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_4</name>
                                <description>Interrupt Source: Capture/compare 2; Interrupt Flag: TAxCCR2 CCIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_6</name>
                                <description>Interrupt Source: Capture/compare 3; Interrupt Flag: TAxCCR3 CCIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_8</name>
                                <description>Interrupt Source: Capture/compare 4; Interrupt Flag: TAxCCR4 CCIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_10</name>
                                <description>Interrupt Source: Capture/compare 5; Interrupt Flag: TAxCCR5 CCIFG</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_12</name>
                                <description>Interrupt Source: Capture/compare 6; Interrupt Flag: TAxCCR6 CCIFG</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_14</name>
                                <description>Interrupt Source: Timer overflow; Interrupt Flag: TAxCTL TAIFG; Interrupt Priority: Lowest</description>
                                <value>14</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>TIMER_A2</name>
        <version>356.0</version>
        <description>TIMER_A2</description>
        <baseAddress>0x40000800</baseAddress>
        <interrupt>
            <name>TA2_0_IRQ</name>
            <description>TA2_0 Interrupt</description>
            <value>12</value>
        </interrupt>
        <interrupt>
            <name>TA2_N_IRQ</name>
            <description>TA2_N Interrupt</description>
            <value>13</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>TAxCTL</name>
                  <displayName>CTL</displayName>
                  <description>TimerAx Control Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIFG</name>
                        <description>TimerA interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TAIE</name>
                        <description>TimerA interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TACLR</name>
                        <description>TimerA clear</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MC</name>
                        <description>Mode control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MC_0</name>
                                <description>Stop mode: Timer is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_1</name>
                                <description>Up mode: Timer counts up to TAxCCR0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_2</name>
                                <description>Continuous mode: Timer counts up to 0FFFFh</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_3</name>
                                <description>Up/down mode: Timer counts up to TAxCCR0 then down to 0000h</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ID</name>
                        <description>Input divider</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ID_0</name>
                                <description>/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_1</name>
                                <description>/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_2</name>
                                <description>/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_3</name>
                                <description>/8</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TASSEL</name>
                        <description>TimerA clock source select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TASSEL_0</name>
                                <description>TAxCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_3</name>
                                <description>INCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCTL[%s]</name>
                  <displayName>CCTL[%s]</displayName>
                  <description>Timer_A Capture/Compare Control Register</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000fff7</resetMask>
                  <fields>
                    <field>
                        <name>CCIFG</name>
                        <description>Capture/compare interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COV</name>
                        <description>Capture overflow</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>COV_0</name>
                                <description>No capture overflow occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>COV_1</name>
                                <description>Capture overflow occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUT</name>
                        <description>Output</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUT_0</name>
                                <description>Output low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUT_1</name>
                                <description>Output high</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCI</name>
                        <description>Capture/compare input</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CCIE</name>
                        <description>Capture/compare interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUTMOD</name>
                        <description>Output mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUTMOD_0</name>
                                <description>OUT bit value</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_1</name>
                                <description>Set</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_2</name>
                                <description>Toggle/reset</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_3</name>
                                <description>Set/reset</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_4</name>
                                <description>Toggle</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_5</name>
                                <description>Reset</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_6</name>
                                <description>Toggle/set</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_7</name>
                                <description>Reset/set</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAP</name>
                        <description>Capture mode</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAP_0</name>
                                <description>Compare mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAP_1</name>
                                <description>Capture mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SCCI</name>
                        <description>Synchronized capture/compare input</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SCS</name>
                        <description>Synchronize capture source</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SCS_0</name>
                                <description>Asynchronous capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SCS_1</name>
                                <description>Synchronous capture</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCIS</name>
                        <description>Capture/compare input select</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIS_0</name>
                                <description>CCIxA</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_1</name>
                                <description>CCIxB</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_2</name>
                                <description>GND</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_3</name>
                                <description>VCC</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CM</name>
                        <description>Capture mode</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CM_0</name>
                                <description>No capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_1</name>
                                <description>Capture on rising edge</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_2</name>
                                <description>Capture on falling edge</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_3</name>
                                <description>Capture on both rising and falling edges</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxR</name>
                  <displayName>R</displayName>
                  <description>TimerA register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCR[%s]</name>
                  <displayName>CCR[%s]</displayName>
                  <description>Timer_A Capture/Compare  Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAxR</name>
                        <description>TimerA register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxEX0</name>
                  <displayName>EX0</displayName>
                  <description>TimerAx Expansion 0 Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIDEX</name>
                        <description>Input divider expansion</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIDEX_0</name>
                                <description>Divide by 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_1</name>
                                <description>Divide by 2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_2</name>
                                <description>Divide by 3</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_3</name>
                                <description>Divide by 4</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_4</name>
                                <description>Divide by 5</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_5</name>
                                <description>Divide by 6</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_6</name>
                                <description>Divide by 7</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_7</name>
                                <description>Divide by 8</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxIV</name>
                  <displayName>IV</displayName>
                  <description>TimerAx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIV</name>
                        <description>TimerA interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>TAIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>TAIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_2</name>
                                <description>Interrupt Source: Capture/compare 1; Interrupt Flag: TAxCCR1 CCIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_4</name>
                                <description>Interrupt Source: Capture/compare 2; Interrupt Flag: TAxCCR2 CCIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_6</name>
                                <description>Interrupt Source: Capture/compare 3; Interrupt Flag: TAxCCR3 CCIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_8</name>
                                <description>Interrupt Source: Capture/compare 4; Interrupt Flag: TAxCCR4 CCIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_10</name>
                                <description>Interrupt Source: Capture/compare 5; Interrupt Flag: TAxCCR5 CCIFG</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_12</name>
                                <description>Interrupt Source: Capture/compare 6; Interrupt Flag: TAxCCR6 CCIFG</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_14</name>
                                <description>Interrupt Source: Timer overflow; Interrupt Flag: TAxCTL TAIFG; Interrupt Priority: Lowest</description>
                                <value>14</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>TIMER_A3</name>
        <version>356.0</version>
        <description>TIMER_A3</description>
        <baseAddress>0x40000C00</baseAddress>
        <interrupt>
            <name>TA3_0_IRQ</name>
            <description>TA3_0 Interrupt</description>
            <value>14</value>
        </interrupt>
        <interrupt>
            <name>TA3_N_IRQ</name>
            <description>TA3_N Interrupt</description>
            <value>15</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>TAxCTL</name>
                  <displayName>CTL</displayName>
                  <description>TimerAx Control Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIFG</name>
                        <description>TimerA interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TAIE</name>
                        <description>TimerA interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TACLR</name>
                        <description>TimerA clear</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MC</name>
                        <description>Mode control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MC_0</name>
                                <description>Stop mode: Timer is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_1</name>
                                <description>Up mode: Timer counts up to TAxCCR0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_2</name>
                                <description>Continuous mode: Timer counts up to 0FFFFh</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MC_3</name>
                                <description>Up/down mode: Timer counts up to TAxCCR0 then down to 0000h</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ID</name>
                        <description>Input divider</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ID_0</name>
                                <description>/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_1</name>
                                <description>/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_2</name>
                                <description>/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ID_3</name>
                                <description>/8</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TASSEL</name>
                        <description>TimerA clock source select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TASSEL_0</name>
                                <description>TAxCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TASSEL_3</name>
                                <description>INCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCTL[%s]</name>
                  <displayName>CCTL[%s]</displayName>
                  <description>Timer_A Capture/Compare Control Register</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000fff7</resetMask>
                  <fields>
                    <field>
                        <name>CCIFG</name>
                        <description>Capture/compare interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COV</name>
                        <description>Capture overflow</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>COV_0</name>
                                <description>No capture overflow occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>COV_1</name>
                                <description>Capture overflow occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUT</name>
                        <description>Output</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUT_0</name>
                                <description>Output low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUT_1</name>
                                <description>Output high</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCI</name>
                        <description>Capture/compare input</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CCIE</name>
                        <description>Capture/compare interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUTMOD</name>
                        <description>Output mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>OUTMOD_0</name>
                                <description>OUT bit value</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_1</name>
                                <description>Set</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_2</name>
                                <description>Toggle/reset</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_3</name>
                                <description>Set/reset</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_4</name>
                                <description>Toggle</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_5</name>
                                <description>Reset</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_6</name>
                                <description>Toggle/set</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>OUTMOD_7</name>
                                <description>Reset/set</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAP</name>
                        <description>Capture mode</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAP_0</name>
                                <description>Compare mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAP_1</name>
                                <description>Capture mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SCCI</name>
                        <description>Synchronized capture/compare input</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SCS</name>
                        <description>Synchronize capture source</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SCS_0</name>
                                <description>Asynchronous capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SCS_1</name>
                                <description>Synchronous capture</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CCIS</name>
                        <description>Capture/compare input select</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CCIS_0</name>
                                <description>CCIxA</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_1</name>
                                <description>CCIxB</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_2</name>
                                <description>GND</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CCIS_3</name>
                                <description>VCC</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CM</name>
                        <description>Capture mode</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CM_0</name>
                                <description>No capture</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_1</name>
                                <description>Capture on rising edge</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_2</name>
                                <description>Capture on falling edge</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CM_3</name>
                                <description>Capture on both rising and falling edges</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxR</name>
                  <displayName>R</displayName>
                  <description>TimerA register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
            </register>
            <register>
                  <dim>5</dim>
                  <dimIncrement>2</dimIncrement>
                  <dimIndex>0,1,2,3,4</dimIndex>
                  <name>TAxCCR[%s]</name>
                  <displayName>CCR[%s]</displayName>
                  <description>Timer_A Capture/Compare  Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAxR</name>
                        <description>TimerA register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxEX0</name>
                  <displayName>EX0</displayName>
                  <description>TimerAx Expansion 0 Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIDEX</name>
                        <description>Input divider expansion</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TAIDEX_0</name>
                                <description>Divide by 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_1</name>
                                <description>Divide by 2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_2</name>
                                <description>Divide by 3</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_3</name>
                                <description>Divide by 4</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_4</name>
                                <description>Divide by 5</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_5</name>
                                <description>Divide by 6</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_6</name>
                                <description>Divide by 7</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIDEX_7</name>
                                <description>Divide by 8</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>TAxIV</name>
                  <displayName>IV</displayName>
                  <description>TimerAx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>TAIV</name>
                        <description>TimerA interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>TAIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>TAIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_2</name>
                                <description>Interrupt Source: Capture/compare 1; Interrupt Flag: TAxCCR1 CCIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_4</name>
                                <description>Interrupt Source: Capture/compare 2; Interrupt Flag: TAxCCR2 CCIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_6</name>
                                <description>Interrupt Source: Capture/compare 3; Interrupt Flag: TAxCCR3 CCIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_8</name>
                                <description>Interrupt Source: Capture/compare 4; Interrupt Flag: TAxCCR4 CCIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_10</name>
                                <description>Interrupt Source: Capture/compare 5; Interrupt Flag: TAxCCR5 CCIFG</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_12</name>
                                <description>Interrupt Source: Capture/compare 6; Interrupt Flag: TAxCCR6 CCIFG</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TAIV_14</name>
                                <description>Interrupt Source: Timer overflow; Interrupt Flag: TAxCTL TAIFG; Interrupt Priority: Lowest</description>
                                <value>14</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_A0</name>
        <version>356.0</version>
        <description>EUSCI_A0</description>
        <baseAddress>0x40001000</baseAddress>
        <interrupt>
            <name>EUSCIA0_IRQ</name>
            <description>EUSCIA0 Interrupt</description>
            <value>16</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x20</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCAxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Ax Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000001</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_A reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_A logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXBRK</name>
                        <description>Transmit break</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXBRK_0</name>
                                <description>Next frame transmitted is not a break</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXBRK_1</name>
                                <description>Next frame transmitted is a break or a break/synch</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXADDR</name>
                        <description>Transmit address</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXADDR_0</name>
                                <description>Next frame transmitted is data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXADDR_1</name>
                                <description>Next frame transmitted is an address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDORM</name>
                        <description>Dormant</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDORM_0</name>
                                <description>Not dormant. All received characters set UCRXIFG.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDORM_1</name>
                                <description>Dormant. Only characters that are preceded by an idle-line or with address bit set UCRXIFG. In UART mode with automatic baud-rate detection, only the combination of a break and synch field sets UCRXIFG.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRKIE</name>
                        <description>Receive break character interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRKIE_0</name>
                                <description>Received break characters do not set UCRXIFG</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRKIE_1</name>
                                <description>Received break characters set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXEIE</name>
                        <description>Receive erroneous-character interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXEIE_0</name>
                                <description>Erroneous characters rejected and UCRXIFG is not set</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXEIE_1</name>
                                <description>Erroneous characters received set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_A clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_A mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>UART mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>Idle-line multiprocessor mode</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>Address-bit multiprocessor mode</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>UART mode with automatic baud-rate detection</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSPB</name>
                        <description>Stop bit select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSPB_0</name>
                                <description>One stop bit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSPB_1</name>
                                <description>Two stop bits</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UC7BIT</name>
                        <description>Character length</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UC7BIT_0</name>
                                <description>8-bit data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UC7BIT_1</name>
                                <description>7-bit data</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMSB</name>
                        <description>MSB first select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMSB_0</name>
                                <description>LSB first</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMSB_1</name>
                                <description>MSB first</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPAR</name>
                        <description>Parity select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPAR_0</name>
                                <description>Odd parity</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPAR_1</name>
                                <description>Even parity</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPEN</name>
                        <description>Parity enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPEN_0</name>
                                <description>Parity disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPEN_1</name>
                                <description>Parity enabled. Parity bit is generated (UCAxTXD) and expected (UCAxRXD). In address-bit multiprocessor mode, the address bit is included in the parity calculation.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Ax Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>Approximately 2 ns (equivalent of 1 delay element)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>Approximately 50 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>Approximately 100 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>Approximately 200 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Ax Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x000000ff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Clock prescaler setting of the Baud rate generator</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxMCTLW</name>
                  <displayName>MCTLW</displayName>
                  <description>eUSCI_Ax Modulation Control Word Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCOS16</name>
                        <description>Oversampling mode enabled</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOS16_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOS16_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRF</name>
                        <description>First modulation stage select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCBRS</name>
                        <description>Second modulation stage select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Ax Status Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBUSY</name>
                        <description>eUSCI_A busy</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBUSY_0</name>
                                <description>eUSCI_A inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBUSY_1</name>
                                <description>eUSCI_A transmitting or receiving</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCADDR_UCIDLE</name>
                        <description>Address received / Idle line detected</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCRXERR</name>
                        <description>Receive error flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXERR_0</name>
                                <description>No receive errors detected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXERR_1</name>
                                <description>Receive error detected</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRK</name>
                        <description>Break detect flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRK_0</name>
                                <description>No break condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRK_1</name>
                                <description>Break condition occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPE</name>
                        <description>Parity error flag. When UCPEN = 0, UCPE is read as 0. UCPE is cleared when UCAxRXBUF is read.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPE_1</name>
                                <description>Character received with parity error</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCOE</name>
                        <description>Overrun error flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOE_1</name>
                                <description>Overrun error occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCFE</name>
                        <description>Framing error flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCFE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCFE_1</name>
                                <description>Character received with low stop bit</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCLISTEN</name>
                        <description>Listen enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCLISTEN_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCLISTEN_1</name>
                                <description>Enabled. UCAxTXD is internally fed back to the receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Ax Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Ax Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxABCTL</name>
                  <displayName>ABCTL</displayName>
                  <description>eUSCI_Ax Auto Baud Rate Control Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCABDEN</name>
                        <description>Automatic baud-rate detect enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCABDEN_0</name>
                                <description>Baud-rate detection disabled. Length of break and synch field is not measured.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCABDEN_1</name>
                                <description>Baud-rate detection enabled. Length of break and synch field is measured and baud-rate settings are changed accordingly.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBTOE</name>
                        <description>Break time out error</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBTOE_1</name>
                                <description>Length of break field exceeded 22 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTOE</name>
                        <description>Synch field time out error</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTOE_1</name>
                                <description>Length of synch field exceeded measurable time</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDELIM</name>
                        <description>Break/synch delimiter length</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDELIM_0</name>
                                <description>1 bit time</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_1</name>
                                <description>2 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_2</name>
                                <description>3 bit times</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_3</name>
                                <description>4 bit times</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIRCTL</name>
                  <displayName>IRCTL</displayName>
                  <description>eUSCI_Ax IrDA Control Word Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIREN</name>
                        <description>IrDA encoder/decoder enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIREN_0</name>
                                <description>IrDA encoder/decoder disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIREN_1</name>
                                <description>IrDA encoder/decoder enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXCLK</name>
                        <description>IrDA transmit pulse clock select</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRTXCLK_0</name>
                                <description>BRCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRTXCLK_1</name>
                                <description>BITCLK16 when UCOS16 = 1. Otherwise, BRCLK.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXPL</name>
                        <description>Transmit pulse length</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCIRRXFE</name>
                        <description>IrDA receive filter enabled</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXFE_0</name>
                                <description>Receive filter disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXFE_1</name>
                                <description>Receive filter enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXPL</name>
                        <description>IrDA receive input UCAxRXD polarity</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXPL_0</name>
                                <description>IrDA transceiver delivers a high pulse when a light pulse is seen</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXPL_1</name>
                                <description>IrDA transceiver delivers a low pulse when a light pulse is seen</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXFL</name>
                        <description>Receive filter length</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Ax Interrupt Enable Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE</name>
                        <description>Receive interrupt enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE</name>
                        <description>Transmit interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>Start bit interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIE</name>
                        <description>Transmit complete interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Ax Interrupt Flag Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG</name>
                        <description>Receive interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG</name>
                        <description>Transmit interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>Start bit interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIFG</name>
                        <description>Transmit ready interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Ax Interrupt Vector Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_A interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Receive buffer full; Interrupt Flag: UCRXIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start bit received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Transmit complete; Interrupt Flag: UCTXCPTIFG; Interrupt Priority: Lowest</description>
                                <value>8</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_A1</name>
        <version>356.0</version>
        <description>EUSCI_A1</description>
        <baseAddress>0x40001400</baseAddress>
        <interrupt>
            <name>EUSCIA1_IRQ</name>
            <description>EUSCIA1 Interrupt</description>
            <value>17</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x20</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCAxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Ax Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000001</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_A reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_A logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXBRK</name>
                        <description>Transmit break</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXBRK_0</name>
                                <description>Next frame transmitted is not a break</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXBRK_1</name>
                                <description>Next frame transmitted is a break or a break/synch</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXADDR</name>
                        <description>Transmit address</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXADDR_0</name>
                                <description>Next frame transmitted is data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXADDR_1</name>
                                <description>Next frame transmitted is an address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDORM</name>
                        <description>Dormant</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDORM_0</name>
                                <description>Not dormant. All received characters set UCRXIFG.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDORM_1</name>
                                <description>Dormant. Only characters that are preceded by an idle-line or with address bit set UCRXIFG. In UART mode with automatic baud-rate detection, only the combination of a break and synch field sets UCRXIFG.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRKIE</name>
                        <description>Receive break character interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRKIE_0</name>
                                <description>Received break characters do not set UCRXIFG</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRKIE_1</name>
                                <description>Received break characters set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXEIE</name>
                        <description>Receive erroneous-character interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXEIE_0</name>
                                <description>Erroneous characters rejected and UCRXIFG is not set</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXEIE_1</name>
                                <description>Erroneous characters received set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_A clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_A mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>UART mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>Idle-line multiprocessor mode</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>Address-bit multiprocessor mode</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>UART mode with automatic baud-rate detection</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSPB</name>
                        <description>Stop bit select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSPB_0</name>
                                <description>One stop bit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSPB_1</name>
                                <description>Two stop bits</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UC7BIT</name>
                        <description>Character length</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UC7BIT_0</name>
                                <description>8-bit data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UC7BIT_1</name>
                                <description>7-bit data</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMSB</name>
                        <description>MSB first select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMSB_0</name>
                                <description>LSB first</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMSB_1</name>
                                <description>MSB first</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPAR</name>
                        <description>Parity select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPAR_0</name>
                                <description>Odd parity</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPAR_1</name>
                                <description>Even parity</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPEN</name>
                        <description>Parity enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPEN_0</name>
                                <description>Parity disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPEN_1</name>
                                <description>Parity enabled. Parity bit is generated (UCAxTXD) and expected (UCAxRXD). In address-bit multiprocessor mode, the address bit is included in the parity calculation.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Ax Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>Approximately 2 ns (equivalent of 1 delay element)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>Approximately 50 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>Approximately 100 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>Approximately 200 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Ax Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x000000ff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Clock prescaler setting of the Baud rate generator</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxMCTLW</name>
                  <displayName>MCTLW</displayName>
                  <description>eUSCI_Ax Modulation Control Word Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCOS16</name>
                        <description>Oversampling mode enabled</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOS16_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOS16_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRF</name>
                        <description>First modulation stage select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCBRS</name>
                        <description>Second modulation stage select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Ax Status Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBUSY</name>
                        <description>eUSCI_A busy</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBUSY_0</name>
                                <description>eUSCI_A inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBUSY_1</name>
                                <description>eUSCI_A transmitting or receiving</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCADDR_UCIDLE</name>
                        <description>Address received / Idle line detected</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCRXERR</name>
                        <description>Receive error flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXERR_0</name>
                                <description>No receive errors detected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXERR_1</name>
                                <description>Receive error detected</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRK</name>
                        <description>Break detect flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRK_0</name>
                                <description>No break condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRK_1</name>
                                <description>Break condition occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPE</name>
                        <description>Parity error flag. When UCPEN = 0, UCPE is read as 0. UCPE is cleared when UCAxRXBUF is read.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPE_1</name>
                                <description>Character received with parity error</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCOE</name>
                        <description>Overrun error flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOE_1</name>
                                <description>Overrun error occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCFE</name>
                        <description>Framing error flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCFE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCFE_1</name>
                                <description>Character received with low stop bit</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCLISTEN</name>
                        <description>Listen enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCLISTEN_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCLISTEN_1</name>
                                <description>Enabled. UCAxTXD is internally fed back to the receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Ax Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Ax Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxABCTL</name>
                  <displayName>ABCTL</displayName>
                  <description>eUSCI_Ax Auto Baud Rate Control Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCABDEN</name>
                        <description>Automatic baud-rate detect enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCABDEN_0</name>
                                <description>Baud-rate detection disabled. Length of break and synch field is not measured.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCABDEN_1</name>
                                <description>Baud-rate detection enabled. Length of break and synch field is measured and baud-rate settings are changed accordingly.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBTOE</name>
                        <description>Break time out error</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBTOE_1</name>
                                <description>Length of break field exceeded 22 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTOE</name>
                        <description>Synch field time out error</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTOE_1</name>
                                <description>Length of synch field exceeded measurable time</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDELIM</name>
                        <description>Break/synch delimiter length</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDELIM_0</name>
                                <description>1 bit time</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_1</name>
                                <description>2 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_2</name>
                                <description>3 bit times</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_3</name>
                                <description>4 bit times</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIRCTL</name>
                  <displayName>IRCTL</displayName>
                  <description>eUSCI_Ax IrDA Control Word Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIREN</name>
                        <description>IrDA encoder/decoder enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIREN_0</name>
                                <description>IrDA encoder/decoder disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIREN_1</name>
                                <description>IrDA encoder/decoder enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXCLK</name>
                        <description>IrDA transmit pulse clock select</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRTXCLK_0</name>
                                <description>BRCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRTXCLK_1</name>
                                <description>BITCLK16 when UCOS16 = 1. Otherwise, BRCLK.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXPL</name>
                        <description>Transmit pulse length</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCIRRXFE</name>
                        <description>IrDA receive filter enabled</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXFE_0</name>
                                <description>Receive filter disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXFE_1</name>
                                <description>Receive filter enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXPL</name>
                        <description>IrDA receive input UCAxRXD polarity</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXPL_0</name>
                                <description>IrDA transceiver delivers a high pulse when a light pulse is seen</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXPL_1</name>
                                <description>IrDA transceiver delivers a low pulse when a light pulse is seen</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXFL</name>
                        <description>Receive filter length</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Ax Interrupt Enable Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE</name>
                        <description>Receive interrupt enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE</name>
                        <description>Transmit interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>Start bit interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIE</name>
                        <description>Transmit complete interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Ax Interrupt Flag Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG</name>
                        <description>Receive interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG</name>
                        <description>Transmit interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>Start bit interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIFG</name>
                        <description>Transmit ready interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Ax Interrupt Vector Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_A interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Receive buffer full; Interrupt Flag: UCRXIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start bit received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Transmit complete; Interrupt Flag: UCTXCPTIFG; Interrupt Priority: Lowest</description>
                                <value>8</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_A2</name>
        <version>356.0</version>
        <description>EUSCI_A2</description>
        <baseAddress>0x40001800</baseAddress>
        <interrupt>
            <name>EUSCIA2_IRQ</name>
            <description>EUSCIA2 Interrupt</description>
            <value>18</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x20</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCAxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Ax Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000001</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_A reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_A logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXBRK</name>
                        <description>Transmit break</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXBRK_0</name>
                                <description>Next frame transmitted is not a break</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXBRK_1</name>
                                <description>Next frame transmitted is a break or a break/synch</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXADDR</name>
                        <description>Transmit address</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXADDR_0</name>
                                <description>Next frame transmitted is data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXADDR_1</name>
                                <description>Next frame transmitted is an address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDORM</name>
                        <description>Dormant</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDORM_0</name>
                                <description>Not dormant. All received characters set UCRXIFG.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDORM_1</name>
                                <description>Dormant. Only characters that are preceded by an idle-line or with address bit set UCRXIFG. In UART mode with automatic baud-rate detection, only the combination of a break and synch field sets UCRXIFG.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRKIE</name>
                        <description>Receive break character interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRKIE_0</name>
                                <description>Received break characters do not set UCRXIFG</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRKIE_1</name>
                                <description>Received break characters set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXEIE</name>
                        <description>Receive erroneous-character interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXEIE_0</name>
                                <description>Erroneous characters rejected and UCRXIFG is not set</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXEIE_1</name>
                                <description>Erroneous characters received set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_A clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_A mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>UART mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>Idle-line multiprocessor mode</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>Address-bit multiprocessor mode</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>UART mode with automatic baud-rate detection</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSPB</name>
                        <description>Stop bit select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSPB_0</name>
                                <description>One stop bit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSPB_1</name>
                                <description>Two stop bits</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UC7BIT</name>
                        <description>Character length</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UC7BIT_0</name>
                                <description>8-bit data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UC7BIT_1</name>
                                <description>7-bit data</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMSB</name>
                        <description>MSB first select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMSB_0</name>
                                <description>LSB first</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMSB_1</name>
                                <description>MSB first</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPAR</name>
                        <description>Parity select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPAR_0</name>
                                <description>Odd parity</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPAR_1</name>
                                <description>Even parity</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPEN</name>
                        <description>Parity enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPEN_0</name>
                                <description>Parity disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPEN_1</name>
                                <description>Parity enabled. Parity bit is generated (UCAxTXD) and expected (UCAxRXD). In address-bit multiprocessor mode, the address bit is included in the parity calculation.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Ax Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>Approximately 2 ns (equivalent of 1 delay element)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>Approximately 50 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>Approximately 100 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>Approximately 200 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Ax Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x000000ff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Clock prescaler setting of the Baud rate generator</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxMCTLW</name>
                  <displayName>MCTLW</displayName>
                  <description>eUSCI_Ax Modulation Control Word Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCOS16</name>
                        <description>Oversampling mode enabled</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOS16_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOS16_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRF</name>
                        <description>First modulation stage select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCBRS</name>
                        <description>Second modulation stage select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Ax Status Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBUSY</name>
                        <description>eUSCI_A busy</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBUSY_0</name>
                                <description>eUSCI_A inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBUSY_1</name>
                                <description>eUSCI_A transmitting or receiving</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCADDR_UCIDLE</name>
                        <description>Address received / Idle line detected</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCRXERR</name>
                        <description>Receive error flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXERR_0</name>
                                <description>No receive errors detected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXERR_1</name>
                                <description>Receive error detected</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRK</name>
                        <description>Break detect flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRK_0</name>
                                <description>No break condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRK_1</name>
                                <description>Break condition occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPE</name>
                        <description>Parity error flag. When UCPEN = 0, UCPE is read as 0. UCPE is cleared when UCAxRXBUF is read.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPE_1</name>
                                <description>Character received with parity error</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCOE</name>
                        <description>Overrun error flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOE_1</name>
                                <description>Overrun error occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCFE</name>
                        <description>Framing error flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCFE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCFE_1</name>
                                <description>Character received with low stop bit</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCLISTEN</name>
                        <description>Listen enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCLISTEN_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCLISTEN_1</name>
                                <description>Enabled. UCAxTXD is internally fed back to the receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Ax Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Ax Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxABCTL</name>
                  <displayName>ABCTL</displayName>
                  <description>eUSCI_Ax Auto Baud Rate Control Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCABDEN</name>
                        <description>Automatic baud-rate detect enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCABDEN_0</name>
                                <description>Baud-rate detection disabled. Length of break and synch field is not measured.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCABDEN_1</name>
                                <description>Baud-rate detection enabled. Length of break and synch field is measured and baud-rate settings are changed accordingly.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBTOE</name>
                        <description>Break time out error</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBTOE_1</name>
                                <description>Length of break field exceeded 22 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTOE</name>
                        <description>Synch field time out error</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTOE_1</name>
                                <description>Length of synch field exceeded measurable time</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDELIM</name>
                        <description>Break/synch delimiter length</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDELIM_0</name>
                                <description>1 bit time</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_1</name>
                                <description>2 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_2</name>
                                <description>3 bit times</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_3</name>
                                <description>4 bit times</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIRCTL</name>
                  <displayName>IRCTL</displayName>
                  <description>eUSCI_Ax IrDA Control Word Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIREN</name>
                        <description>IrDA encoder/decoder enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIREN_0</name>
                                <description>IrDA encoder/decoder disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIREN_1</name>
                                <description>IrDA encoder/decoder enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXCLK</name>
                        <description>IrDA transmit pulse clock select</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRTXCLK_0</name>
                                <description>BRCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRTXCLK_1</name>
                                <description>BITCLK16 when UCOS16 = 1. Otherwise, BRCLK.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXPL</name>
                        <description>Transmit pulse length</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCIRRXFE</name>
                        <description>IrDA receive filter enabled</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXFE_0</name>
                                <description>Receive filter disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXFE_1</name>
                                <description>Receive filter enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXPL</name>
                        <description>IrDA receive input UCAxRXD polarity</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXPL_0</name>
                                <description>IrDA transceiver delivers a high pulse when a light pulse is seen</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXPL_1</name>
                                <description>IrDA transceiver delivers a low pulse when a light pulse is seen</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXFL</name>
                        <description>Receive filter length</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Ax Interrupt Enable Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE</name>
                        <description>Receive interrupt enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE</name>
                        <description>Transmit interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>Start bit interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIE</name>
                        <description>Transmit complete interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Ax Interrupt Flag Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG</name>
                        <description>Receive interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG</name>
                        <description>Transmit interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>Start bit interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIFG</name>
                        <description>Transmit ready interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Ax Interrupt Vector Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_A interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Receive buffer full; Interrupt Flag: UCRXIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start bit received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Transmit complete; Interrupt Flag: UCTXCPTIFG; Interrupt Priority: Lowest</description>
                                <value>8</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_A3</name>
        <version>356.0</version>
        <description>EUSCI_A3</description>
        <baseAddress>0x40001C00</baseAddress>
        <interrupt>
            <name>EUSCIA3_IRQ</name>
            <description>EUSCIA3 Interrupt</description>
            <value>19</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x20</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCAxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Ax Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000001</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_A reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_A logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXBRK</name>
                        <description>Transmit break</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXBRK_0</name>
                                <description>Next frame transmitted is not a break</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXBRK_1</name>
                                <description>Next frame transmitted is a break or a break/synch</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXADDR</name>
                        <description>Transmit address</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXADDR_0</name>
                                <description>Next frame transmitted is data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXADDR_1</name>
                                <description>Next frame transmitted is an address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDORM</name>
                        <description>Dormant</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDORM_0</name>
                                <description>Not dormant. All received characters set UCRXIFG.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDORM_1</name>
                                <description>Dormant. Only characters that are preceded by an idle-line or with address bit set UCRXIFG. In UART mode with automatic baud-rate detection, only the combination of a break and synch field sets UCRXIFG.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRKIE</name>
                        <description>Receive break character interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRKIE_0</name>
                                <description>Received break characters do not set UCRXIFG</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRKIE_1</name>
                                <description>Received break characters set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXEIE</name>
                        <description>Receive erroneous-character interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXEIE_0</name>
                                <description>Erroneous characters rejected and UCRXIFG is not set</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXEIE_1</name>
                                <description>Erroneous characters received set UCRXIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_A clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_A mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>UART mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>Idle-line multiprocessor mode</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>Address-bit multiprocessor mode</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>UART mode with automatic baud-rate detection</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSPB</name>
                        <description>Stop bit select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSPB_0</name>
                                <description>One stop bit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSPB_1</name>
                                <description>Two stop bits</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UC7BIT</name>
                        <description>Character length</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UC7BIT_0</name>
                                <description>8-bit data</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UC7BIT_1</name>
                                <description>7-bit data</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMSB</name>
                        <description>MSB first select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMSB_0</name>
                                <description>LSB first</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMSB_1</name>
                                <description>MSB first</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPAR</name>
                        <description>Parity select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPAR_0</name>
                                <description>Odd parity</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPAR_1</name>
                                <description>Even parity</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPEN</name>
                        <description>Parity enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPEN_0</name>
                                <description>Parity disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPEN_1</name>
                                <description>Parity enabled. Parity bit is generated (UCAxTXD) and expected (UCAxRXD). In address-bit multiprocessor mode, the address bit is included in the parity calculation.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Ax Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>Approximately 2 ns (equivalent of 1 delay element)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>Approximately 50 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>Approximately 100 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>Approximately 200 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Ax Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x000000ff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Clock prescaler setting of the Baud rate generator</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxMCTLW</name>
                  <displayName>MCTLW</displayName>
                  <description>eUSCI_Ax Modulation Control Word Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCOS16</name>
                        <description>Oversampling mode enabled</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOS16_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOS16_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRF</name>
                        <description>First modulation stage select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCBRS</name>
                        <description>Second modulation stage select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Ax Status Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBUSY</name>
                        <description>eUSCI_A busy</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBUSY_0</name>
                                <description>eUSCI_A inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBUSY_1</name>
                                <description>eUSCI_A transmitting or receiving</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCADDR_UCIDLE</name>
                        <description>Address received / Idle line detected</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCRXERR</name>
                        <description>Receive error flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXERR_0</name>
                                <description>No receive errors detected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXERR_1</name>
                                <description>Receive error detected</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBRK</name>
                        <description>Break detect flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBRK_0</name>
                                <description>No break condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBRK_1</name>
                                <description>Break condition occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCPE</name>
                        <description>Parity error flag. When UCPEN = 0, UCPE is read as 0. UCPE is cleared when UCAxRXBUF is read.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCPE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCPE_1</name>
                                <description>Character received with parity error</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCOE</name>
                        <description>Overrun error flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOE_1</name>
                                <description>Overrun error occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCFE</name>
                        <description>Framing error flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCFE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCFE_1</name>
                                <description>Character received with low stop bit</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCLISTEN</name>
                        <description>Listen enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCLISTEN_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCLISTEN_1</name>
                                <description>Enabled. UCAxTXD is internally fed back to the receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Ax Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Ax Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxABCTL</name>
                  <displayName>ABCTL</displayName>
                  <description>eUSCI_Ax Auto Baud Rate Control Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCABDEN</name>
                        <description>Automatic baud-rate detect enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCABDEN_0</name>
                                <description>Baud-rate detection disabled. Length of break and synch field is not measured.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCABDEN_1</name>
                                <description>Baud-rate detection enabled. Length of break and synch field is measured and baud-rate settings are changed accordingly.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBTOE</name>
                        <description>Break time out error</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBTOE_1</name>
                                <description>Length of break field exceeded 22 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTOE</name>
                        <description>Synch field time out error</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTOE_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTOE_1</name>
                                <description>Length of synch field exceeded measurable time</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCDELIM</name>
                        <description>Break/synch delimiter length</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCDELIM_0</name>
                                <description>1 bit time</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_1</name>
                                <description>2 bit times</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_2</name>
                                <description>3 bit times</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCDELIM_3</name>
                                <description>4 bit times</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIRCTL</name>
                  <displayName>IRCTL</displayName>
                  <description>eUSCI_Ax IrDA Control Word Register</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIREN</name>
                        <description>IrDA encoder/decoder enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIREN_0</name>
                                <description>IrDA encoder/decoder disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIREN_1</name>
                                <description>IrDA encoder/decoder enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXCLK</name>
                        <description>IrDA transmit pulse clock select</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRTXCLK_0</name>
                                <description>BRCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRTXCLK_1</name>
                                <description>BITCLK16 when UCOS16 = 1. Otherwise, BRCLK.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRTXPL</name>
                        <description>Transmit pulse length</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCIRRXFE</name>
                        <description>IrDA receive filter enabled</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXFE_0</name>
                                <description>Receive filter disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXFE_1</name>
                                <description>Receive filter enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXPL</name>
                        <description>IrDA receive input UCAxRXD polarity</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCIRRXPL_0</name>
                                <description>IrDA transceiver delivers a high pulse when a light pulse is seen</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIRRXPL_1</name>
                                <description>IrDA transceiver delivers a low pulse when a light pulse is seen</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCIRRXFL</name>
                        <description>Receive filter length</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Ax Interrupt Enable Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE</name>
                        <description>Receive interrupt enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE</name>
                        <description>Transmit interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>Start bit interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIE</name>
                        <description>Transmit complete interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Ax Interrupt Flag Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG</name>
                        <description>Receive interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG</name>
                        <description>Transmit interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>Start bit interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXCPTIFG</name>
                        <description>Transmit ready interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXCPTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCAxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Ax Interrupt Vector Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_A interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Receive buffer full; Interrupt Flag: UCRXIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start bit received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Transmit complete; Interrupt Flag: UCTXCPTIFG; Interrupt Priority: Lowest</description>
                                <value>8</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_B0</name>
        <version>356.0</version>
        <description>EUSCI_B0</description>
        <baseAddress>0x40002000</baseAddress>
        <interrupt>
            <name>EUSCIB0_IRQ</name>
            <description>EUSCIB0 Interrupt</description>
            <value>20</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCBxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Bx Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000001c1</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_B reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_B logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTT</name>
                        <description>Transmit START condition in master mode</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTT_0</name>
                                <description>Do not generate START condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTT_1</name>
                                <description>Generate START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTP</name>
                        <description>Transmit STOP condition in master mode</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTP_0</name>
                                <description>No STOP generated</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTP_1</name>
                                <description>Generate STOP</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXNACK</name>
                        <description>Transmit a NACK</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXNACK_0</name>
                                <description>Acknowledge normally</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXNACK_1</name>
                                <description>Generate NACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTR</name>
                        <description>Transmitter/receiver</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTR_0</name>
                                <description>Receiver</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTR_1</name>
                                <description>Transmitter</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXACK</name>
                        <description>Transmit ACK condition in slave mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXACK_0</name>
                                <description>Do not acknowledge the slave address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXACK_1</name>
                                <description>Acknowledge the slave address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_B clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLKI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_3</name>
                                <description>SMCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_B mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>3-pin SPI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>4-pin SPI (master or slave enabled if STE = 1)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>4-pin SPI (master or slave enabled if STE = 0)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>I2C mode</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMST</name>
                        <description>Master mode select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMST_0</name>
                                <description>Slave mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMST_1</name>
                                <description>Master mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMM</name>
                        <description>Multi-master environment select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMM_0</name>
                                <description>Single master environment. There is no other master in the system. The address compare unit is disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMM_1</name>
                                <description>Multi-master environment</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSLA10</name>
                        <description>Slave addressing mode select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSLA10_0</name>
                                <description>Address slave with 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSLA10_1</name>
                                <description>Address slave with 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCA10</name>
                        <description>Own addressing mode select</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCA10_0</name>
                                <description>Own address is a 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCA10_1</name>
                                <description>Own address is a 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Bx Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>50 ns</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>25 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>12.5 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>6.25 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCASTP</name>
                        <description>Automatic STOP condition generation</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCASTP_0</name>
                                <description>No automatic STOP generation. The STOP condition is generated after the user sets the UCTXSTP bit. The value in UCBxTBCNT is a don't care.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_1</name>
                                <description>UCBCNTIFG is set with the byte counter reaches the threshold defined in UCBxTBCNT</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_2</name>
                                <description>A STOP condition is generated automatically after the byte counter value reached UCBxTBCNT. UCBCNTIFG is set with the byte counter reaching the threshold</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSWACK</name>
                        <description>SW or HW ACK control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWACK_0</name>
                                <description>The address acknowledge of the slave is controlled by the eUSCI_B module</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWACK_1</name>
                                <description>The user needs to trigger the sending of the address ACK by issuing UCTXACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPNACK</name>
                        <description>ACK all master bytes</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPNACK_0</name>
                                <description>Send a non-acknowledge before the STOP condition as a master receiver (conform to I2C standard)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPNACK_1</name>
                                <description>All bytes are acknowledged by the eUSCI_B when configured as master receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTO</name>
                        <description>Clock low timeout select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTO_0</name>
                                <description>Disable clock low timeout counter</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_1</name>
                                <description>135 000 SYSCLK cycles (approximately 28 ms)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_2</name>
                                <description>150 000 SYSCLK cycles (approximately 31 ms)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_3</name>
                                <description>165 000 SYSCLK cycles (approximately 34 ms)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCETXINT</name>
                        <description>Early UCTXIFG0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCETXINT_0</name>
                                <description>UCTXIFGx is set after an address match with UCxI2COAx and the direction bit indicating slave transmit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCETXINT_1</name>
                                <description>UCTXIFG0 is set for each START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Bx Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Bit clock prescaler</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Bx Status Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBBUSY</name>
                        <description>Bus busy</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBBUSY_0</name>
                                <description>Bus inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBBUSY_1</name>
                                <description>Bus busy</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGC</name>
                        <description>General call address received</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCGC_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCGC_0</name>
                                <description>No general call address received</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGC_1</name>
                                <description>General call address received</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSCLLOW</name>
                        <description>SCL low</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCSCLLOW_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCSCLLOW_0</name>
                                <description>SCL is not held low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSCLLOW_1</name>
                                <description>SCL is held low</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNT</name>
                        <description>Hardware byte counter value</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTBCNT</name>
                  <displayName>TBCNT</displayName>
                  <description>eUSCI_Bx Byte Counter Threshold Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTBCNT</name>
                        <description>Byte counter threshold value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Bx Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Bx Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA0</name>
                  <displayName>I2COA0</displayName>
                  <description>eUSCI_Bx I2C Own Address 0 Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA0</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA0 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA0 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGCEN</name>
                        <description>General call response enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGCEN_0</name>
                                <description>Do not respond to a general call</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGCEN_1</name>
                                <description>Respond to a general call</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA1</name>
                  <displayName>I2COA1</displayName>
                  <description>eUSCI_Bx I2C Own Address 1 Register</description>
                  <addressOffset>0x16</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA1</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA1 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA1 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA2</name>
                  <displayName>I2COA2</displayName>
                  <description>eUSCI_Bx I2C Own Address 2 Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA2</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA2 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA2 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA3</name>
                  <displayName>I2COA3</displayName>
                  <description>eUSCI_Bx I2C Own Address 3 Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA3</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA3 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA3 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDRX</name>
                  <displayName>ADDRX</displayName>
                  <description>eUSCI_Bx I2C Received Address Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDRX</name>
                        <description>Received Address Register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDMASK</name>
                  <displayName>ADDMASK</displayName>
                  <description>eUSCI_Bx I2C Address Mask Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000003ff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDMASK</name>
                        <description>Address Mask Register. By clearing the corresponding bit of the own address, this bit is a don't care when comparing the address on the bus to the own address. Using this method, it is possible to react on more than one slave address. When all bits of ADDMASKx are set, the address mask feature is deactivated.
Modify only when UCSWRST = 1.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2CSA</name>
                  <displayName>I2CSA</displayName>
                  <description>eUSCI_Bx I2C Slave Address Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2CSA</name>
                        <description>I2C slave address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Bx Interrupt Enable Register</description>
                  <addressOffset>0x2A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE0</name>
                        <description>Receive interrupt enable 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE0</name>
                        <description>Transmit interrupt enable 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>START condition interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIE</name>
                        <description>STOP condition interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIE</name>
                        <description>Arbitration lost interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIE</name>
                        <description>Not-acknowledge interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIE</name>
                        <description>Byte counter interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIE</name>
                        <description>Clock low timeout interrupt enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE1</name>
                        <description>Receive interrupt enable 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE1</name>
                        <description>Transmit interrupt enable 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE2</name>
                        <description>Receive interrupt enable 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE2</name>
                        <description>Transmit interrupt enable 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE3</name>
                        <description>Receive interrupt enable 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE3</name>
                        <description>Transmit interrupt enable 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IE</name>
                        <description>Bit position 9 interrupt enable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Bx Interrupt Flag Register</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG0</name>
                        <description>eUSCI_B receive interrupt flag 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG0</name>
                        <description>eUSCI_B transmit interrupt flag 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>START condition interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIFG</name>
                        <description>STOP condition interrupt flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIFG</name>
                        <description>Arbitration lost interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIFG</name>
                        <description>Not-acknowledge received interrupt flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIFG</name>
                        <description>Byte counter interrupt flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIFG</name>
                        <description>Clock low timeout interrupt flag</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG1</name>
                        <description>eUSCI_B receive interrupt flag 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG1</name>
                        <description>eUSCI_B transmit interrupt flag 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG2</name>
                        <description>eUSCI_B receive interrupt flag 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG2</name>
                        <description>eUSCI_B transmit interrupt flag 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG3</name>
                        <description>eUSCI_B receive interrupt flag 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG3</name>
                        <description>eUSCI_B transmit interrupt flag 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IFG</name>
                        <description>Bit position 9 interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Bx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_B interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Arbitration lost; Interrupt Flag: UCALIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Not acknowledgment; Interrupt Flag: UCNACKIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start condition received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Stop condition received; Interrupt Flag: UCSTPIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_10</name>
                                <description>Interrupt Source: Slave 3 Data received; Interrupt Flag: UCRXIFG3</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_12</name>
                                <description>Interrupt Source: Slave 3 Transmit buffer empty; Interrupt Flag: UCTXIFG3</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_14</name>
                                <description>Interrupt Source: Slave 2 Data received; Interrupt Flag: UCRXIFG2</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_16</name>
                                <description>Interrupt Source: Slave 2 Transmit buffer empty; Interrupt Flag: UCTXIFG2</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_18</name>
                                <description>Interrupt Source: Slave 1 Data received; Interrupt Flag: UCRXIFG1</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_20</name>
                                <description>Interrupt Source: Slave 1 Transmit buffer empty; Interrupt Flag: UCTXIFG1</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_22</name>
                                <description>Interrupt Source: Data received; Interrupt Flag: UCRXIFG0</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_24</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG0</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_26</name>
                                <description>Interrupt Source: Byte counter zero; Interrupt Flag: UCBCNTIFG</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_28</name>
                                <description>Interrupt Source: Clock low timeout; Interrupt Flag: UCCLTOIFG</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_30</name>
                                <description>Interrupt Source: Nineth bit position; Interrupt Flag: UCBIT9IFG; Priority: Lowest</description>
                                <value>30</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_B1</name>
        <version>356.0</version>
        <description>EUSCI_B1</description>
        <baseAddress>0x40002400</baseAddress>
        <interrupt>
            <name>EUSCIB1_IRQ</name>
            <description>EUSCIB1 Interrupt</description>
            <value>21</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCBxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Bx Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000001c1</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_B reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_B logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTT</name>
                        <description>Transmit START condition in master mode</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTT_0</name>
                                <description>Do not generate START condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTT_1</name>
                                <description>Generate START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTP</name>
                        <description>Transmit STOP condition in master mode</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTP_0</name>
                                <description>No STOP generated</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTP_1</name>
                                <description>Generate STOP</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXNACK</name>
                        <description>Transmit a NACK</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXNACK_0</name>
                                <description>Acknowledge normally</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXNACK_1</name>
                                <description>Generate NACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTR</name>
                        <description>Transmitter/receiver</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTR_0</name>
                                <description>Receiver</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTR_1</name>
                                <description>Transmitter</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXACK</name>
                        <description>Transmit ACK condition in slave mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXACK_0</name>
                                <description>Do not acknowledge the slave address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXACK_1</name>
                                <description>Acknowledge the slave address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_B clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLKI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_3</name>
                                <description>SMCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_B mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>3-pin SPI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>4-pin SPI (master or slave enabled if STE = 1)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>4-pin SPI (master or slave enabled if STE = 0)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>I2C mode</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMST</name>
                        <description>Master mode select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMST_0</name>
                                <description>Slave mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMST_1</name>
                                <description>Master mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMM</name>
                        <description>Multi-master environment select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMM_0</name>
                                <description>Single master environment. There is no other master in the system. The address compare unit is disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMM_1</name>
                                <description>Multi-master environment</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSLA10</name>
                        <description>Slave addressing mode select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSLA10_0</name>
                                <description>Address slave with 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSLA10_1</name>
                                <description>Address slave with 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCA10</name>
                        <description>Own addressing mode select</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCA10_0</name>
                                <description>Own address is a 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCA10_1</name>
                                <description>Own address is a 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Bx Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>50 ns</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>25 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>12.5 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>6.25 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCASTP</name>
                        <description>Automatic STOP condition generation</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCASTP_0</name>
                                <description>No automatic STOP generation. The STOP condition is generated after the user sets the UCTXSTP bit. The value in UCBxTBCNT is a don't care.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_1</name>
                                <description>UCBCNTIFG is set with the byte counter reaches the threshold defined in UCBxTBCNT</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_2</name>
                                <description>A STOP condition is generated automatically after the byte counter value reached UCBxTBCNT. UCBCNTIFG is set with the byte counter reaching the threshold</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSWACK</name>
                        <description>SW or HW ACK control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWACK_0</name>
                                <description>The address acknowledge of the slave is controlled by the eUSCI_B module</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWACK_1</name>
                                <description>The user needs to trigger the sending of the address ACK by issuing UCTXACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPNACK</name>
                        <description>ACK all master bytes</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPNACK_0</name>
                                <description>Send a non-acknowledge before the STOP condition as a master receiver (conform to I2C standard)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPNACK_1</name>
                                <description>All bytes are acknowledged by the eUSCI_B when configured as master receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTO</name>
                        <description>Clock low timeout select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTO_0</name>
                                <description>Disable clock low timeout counter</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_1</name>
                                <description>135 000 SYSCLK cycles (approximately 28 ms)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_2</name>
                                <description>150 000 SYSCLK cycles (approximately 31 ms)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_3</name>
                                <description>165 000 SYSCLK cycles (approximately 34 ms)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCETXINT</name>
                        <description>Early UCTXIFG0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCETXINT_0</name>
                                <description>UCTXIFGx is set after an address match with UCxI2COAx and the direction bit indicating slave transmit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCETXINT_1</name>
                                <description>UCTXIFG0 is set for each START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Bx Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Bit clock prescaler</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Bx Status Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBBUSY</name>
                        <description>Bus busy</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBBUSY_0</name>
                                <description>Bus inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBBUSY_1</name>
                                <description>Bus busy</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGC</name>
                        <description>General call address received</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCGC_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCGC_0</name>
                                <description>No general call address received</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGC_1</name>
                                <description>General call address received</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSCLLOW</name>
                        <description>SCL low</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCSCLLOW_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCSCLLOW_0</name>
                                <description>SCL is not held low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSCLLOW_1</name>
                                <description>SCL is held low</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNT</name>
                        <description>Hardware byte counter value</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTBCNT</name>
                  <displayName>TBCNT</displayName>
                  <description>eUSCI_Bx Byte Counter Threshold Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTBCNT</name>
                        <description>Byte counter threshold value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Bx Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Bx Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA0</name>
                  <displayName>I2COA0</displayName>
                  <description>eUSCI_Bx I2C Own Address 0 Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA0</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA0 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA0 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGCEN</name>
                        <description>General call response enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGCEN_0</name>
                                <description>Do not respond to a general call</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGCEN_1</name>
                                <description>Respond to a general call</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA1</name>
                  <displayName>I2COA1</displayName>
                  <description>eUSCI_Bx I2C Own Address 1 Register</description>
                  <addressOffset>0x16</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA1</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA1 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA1 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA2</name>
                  <displayName>I2COA2</displayName>
                  <description>eUSCI_Bx I2C Own Address 2 Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA2</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA2 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA2 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA3</name>
                  <displayName>I2COA3</displayName>
                  <description>eUSCI_Bx I2C Own Address 3 Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA3</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA3 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA3 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDRX</name>
                  <displayName>ADDRX</displayName>
                  <description>eUSCI_Bx I2C Received Address Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDRX</name>
                        <description>Received Address Register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDMASK</name>
                  <displayName>ADDMASK</displayName>
                  <description>eUSCI_Bx I2C Address Mask Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000003ff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDMASK</name>
                        <description>Address Mask Register. By clearing the corresponding bit of the own address, this bit is a don't care when comparing the address on the bus to the own address. Using this method, it is possible to react on more than one slave address. When all bits of ADDMASKx are set, the address mask feature is deactivated.
Modify only when UCSWRST = 1.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2CSA</name>
                  <displayName>I2CSA</displayName>
                  <description>eUSCI_Bx I2C Slave Address Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2CSA</name>
                        <description>I2C slave address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Bx Interrupt Enable Register</description>
                  <addressOffset>0x2A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE0</name>
                        <description>Receive interrupt enable 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE0</name>
                        <description>Transmit interrupt enable 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>START condition interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIE</name>
                        <description>STOP condition interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIE</name>
                        <description>Arbitration lost interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIE</name>
                        <description>Not-acknowledge interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIE</name>
                        <description>Byte counter interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIE</name>
                        <description>Clock low timeout interrupt enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE1</name>
                        <description>Receive interrupt enable 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE1</name>
                        <description>Transmit interrupt enable 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE2</name>
                        <description>Receive interrupt enable 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE2</name>
                        <description>Transmit interrupt enable 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE3</name>
                        <description>Receive interrupt enable 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE3</name>
                        <description>Transmit interrupt enable 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IE</name>
                        <description>Bit position 9 interrupt enable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Bx Interrupt Flag Register</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG0</name>
                        <description>eUSCI_B receive interrupt flag 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG0</name>
                        <description>eUSCI_B transmit interrupt flag 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>START condition interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIFG</name>
                        <description>STOP condition interrupt flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIFG</name>
                        <description>Arbitration lost interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIFG</name>
                        <description>Not-acknowledge received interrupt flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIFG</name>
                        <description>Byte counter interrupt flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIFG</name>
                        <description>Clock low timeout interrupt flag</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG1</name>
                        <description>eUSCI_B receive interrupt flag 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG1</name>
                        <description>eUSCI_B transmit interrupt flag 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG2</name>
                        <description>eUSCI_B receive interrupt flag 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG2</name>
                        <description>eUSCI_B transmit interrupt flag 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG3</name>
                        <description>eUSCI_B receive interrupt flag 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG3</name>
                        <description>eUSCI_B transmit interrupt flag 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IFG</name>
                        <description>Bit position 9 interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Bx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_B interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Arbitration lost; Interrupt Flag: UCALIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Not acknowledgment; Interrupt Flag: UCNACKIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start condition received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Stop condition received; Interrupt Flag: UCSTPIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_10</name>
                                <description>Interrupt Source: Slave 3 Data received; Interrupt Flag: UCRXIFG3</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_12</name>
                                <description>Interrupt Source: Slave 3 Transmit buffer empty; Interrupt Flag: UCTXIFG3</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_14</name>
                                <description>Interrupt Source: Slave 2 Data received; Interrupt Flag: UCRXIFG2</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_16</name>
                                <description>Interrupt Source: Slave 2 Transmit buffer empty; Interrupt Flag: UCTXIFG2</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_18</name>
                                <description>Interrupt Source: Slave 1 Data received; Interrupt Flag: UCRXIFG1</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_20</name>
                                <description>Interrupt Source: Slave 1 Transmit buffer empty; Interrupt Flag: UCTXIFG1</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_22</name>
                                <description>Interrupt Source: Data received; Interrupt Flag: UCRXIFG0</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_24</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG0</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_26</name>
                                <description>Interrupt Source: Byte counter zero; Interrupt Flag: UCBCNTIFG</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_28</name>
                                <description>Interrupt Source: Clock low timeout; Interrupt Flag: UCCLTOIFG</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_30</name>
                                <description>Interrupt Source: Nineth bit position; Interrupt Flag: UCBIT9IFG; Priority: Lowest</description>
                                <value>30</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_B2</name>
        <version>356.0</version>
        <description>EUSCI_B2</description>
        <baseAddress>0x40002800</baseAddress>
        <interrupt>
            <name>EUSCIB2_IRQ</name>
            <description>EUSCIB2 Interrupt</description>
            <value>22</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCBxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Bx Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000001c1</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_B reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_B logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTT</name>
                        <description>Transmit START condition in master mode</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTT_0</name>
                                <description>Do not generate START condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTT_1</name>
                                <description>Generate START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTP</name>
                        <description>Transmit STOP condition in master mode</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTP_0</name>
                                <description>No STOP generated</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTP_1</name>
                                <description>Generate STOP</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXNACK</name>
                        <description>Transmit a NACK</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXNACK_0</name>
                                <description>Acknowledge normally</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXNACK_1</name>
                                <description>Generate NACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTR</name>
                        <description>Transmitter/receiver</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTR_0</name>
                                <description>Receiver</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTR_1</name>
                                <description>Transmitter</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXACK</name>
                        <description>Transmit ACK condition in slave mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXACK_0</name>
                                <description>Do not acknowledge the slave address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXACK_1</name>
                                <description>Acknowledge the slave address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_B clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLKI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_3</name>
                                <description>SMCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_B mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>3-pin SPI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>4-pin SPI (master or slave enabled if STE = 1)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>4-pin SPI (master or slave enabled if STE = 0)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>I2C mode</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMST</name>
                        <description>Master mode select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMST_0</name>
                                <description>Slave mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMST_1</name>
                                <description>Master mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMM</name>
                        <description>Multi-master environment select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMM_0</name>
                                <description>Single master environment. There is no other master in the system. The address compare unit is disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMM_1</name>
                                <description>Multi-master environment</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSLA10</name>
                        <description>Slave addressing mode select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSLA10_0</name>
                                <description>Address slave with 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSLA10_1</name>
                                <description>Address slave with 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCA10</name>
                        <description>Own addressing mode select</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCA10_0</name>
                                <description>Own address is a 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCA10_1</name>
                                <description>Own address is a 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Bx Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>50 ns</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>25 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>12.5 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>6.25 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCASTP</name>
                        <description>Automatic STOP condition generation</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCASTP_0</name>
                                <description>No automatic STOP generation. The STOP condition is generated after the user sets the UCTXSTP bit. The value in UCBxTBCNT is a don't care.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_1</name>
                                <description>UCBCNTIFG is set with the byte counter reaches the threshold defined in UCBxTBCNT</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_2</name>
                                <description>A STOP condition is generated automatically after the byte counter value reached UCBxTBCNT. UCBCNTIFG is set with the byte counter reaching the threshold</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSWACK</name>
                        <description>SW or HW ACK control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWACK_0</name>
                                <description>The address acknowledge of the slave is controlled by the eUSCI_B module</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWACK_1</name>
                                <description>The user needs to trigger the sending of the address ACK by issuing UCTXACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPNACK</name>
                        <description>ACK all master bytes</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPNACK_0</name>
                                <description>Send a non-acknowledge before the STOP condition as a master receiver (conform to I2C standard)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPNACK_1</name>
                                <description>All bytes are acknowledged by the eUSCI_B when configured as master receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTO</name>
                        <description>Clock low timeout select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTO_0</name>
                                <description>Disable clock low timeout counter</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_1</name>
                                <description>135 000 SYSCLK cycles (approximately 28 ms)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_2</name>
                                <description>150 000 SYSCLK cycles (approximately 31 ms)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_3</name>
                                <description>165 000 SYSCLK cycles (approximately 34 ms)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCETXINT</name>
                        <description>Early UCTXIFG0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCETXINT_0</name>
                                <description>UCTXIFGx is set after an address match with UCxI2COAx and the direction bit indicating slave transmit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCETXINT_1</name>
                                <description>UCTXIFG0 is set for each START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Bx Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Bit clock prescaler</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Bx Status Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBBUSY</name>
                        <description>Bus busy</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBBUSY_0</name>
                                <description>Bus inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBBUSY_1</name>
                                <description>Bus busy</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGC</name>
                        <description>General call address received</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCGC_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCGC_0</name>
                                <description>No general call address received</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGC_1</name>
                                <description>General call address received</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSCLLOW</name>
                        <description>SCL low</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCSCLLOW_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCSCLLOW_0</name>
                                <description>SCL is not held low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSCLLOW_1</name>
                                <description>SCL is held low</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNT</name>
                        <description>Hardware byte counter value</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTBCNT</name>
                  <displayName>TBCNT</displayName>
                  <description>eUSCI_Bx Byte Counter Threshold Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTBCNT</name>
                        <description>Byte counter threshold value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Bx Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Bx Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA0</name>
                  <displayName>I2COA0</displayName>
                  <description>eUSCI_Bx I2C Own Address 0 Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA0</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA0 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA0 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGCEN</name>
                        <description>General call response enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGCEN_0</name>
                                <description>Do not respond to a general call</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGCEN_1</name>
                                <description>Respond to a general call</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA1</name>
                  <displayName>I2COA1</displayName>
                  <description>eUSCI_Bx I2C Own Address 1 Register</description>
                  <addressOffset>0x16</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA1</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA1 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA1 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA2</name>
                  <displayName>I2COA2</displayName>
                  <description>eUSCI_Bx I2C Own Address 2 Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA2</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA2 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA2 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA3</name>
                  <displayName>I2COA3</displayName>
                  <description>eUSCI_Bx I2C Own Address 3 Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA3</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA3 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA3 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDRX</name>
                  <displayName>ADDRX</displayName>
                  <description>eUSCI_Bx I2C Received Address Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDRX</name>
                        <description>Received Address Register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDMASK</name>
                  <displayName>ADDMASK</displayName>
                  <description>eUSCI_Bx I2C Address Mask Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000003ff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDMASK</name>
                        <description>Address Mask Register. By clearing the corresponding bit of the own address, this bit is a don't care when comparing the address on the bus to the own address. Using this method, it is possible to react on more than one slave address. When all bits of ADDMASKx are set, the address mask feature is deactivated.
Modify only when UCSWRST = 1.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2CSA</name>
                  <displayName>I2CSA</displayName>
                  <description>eUSCI_Bx I2C Slave Address Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2CSA</name>
                        <description>I2C slave address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Bx Interrupt Enable Register</description>
                  <addressOffset>0x2A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE0</name>
                        <description>Receive interrupt enable 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE0</name>
                        <description>Transmit interrupt enable 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>START condition interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIE</name>
                        <description>STOP condition interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIE</name>
                        <description>Arbitration lost interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIE</name>
                        <description>Not-acknowledge interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIE</name>
                        <description>Byte counter interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIE</name>
                        <description>Clock low timeout interrupt enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE1</name>
                        <description>Receive interrupt enable 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE1</name>
                        <description>Transmit interrupt enable 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE2</name>
                        <description>Receive interrupt enable 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE2</name>
                        <description>Transmit interrupt enable 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE3</name>
                        <description>Receive interrupt enable 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE3</name>
                        <description>Transmit interrupt enable 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IE</name>
                        <description>Bit position 9 interrupt enable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Bx Interrupt Flag Register</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG0</name>
                        <description>eUSCI_B receive interrupt flag 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG0</name>
                        <description>eUSCI_B transmit interrupt flag 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>START condition interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIFG</name>
                        <description>STOP condition interrupt flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIFG</name>
                        <description>Arbitration lost interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIFG</name>
                        <description>Not-acknowledge received interrupt flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIFG</name>
                        <description>Byte counter interrupt flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIFG</name>
                        <description>Clock low timeout interrupt flag</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG1</name>
                        <description>eUSCI_B receive interrupt flag 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG1</name>
                        <description>eUSCI_B transmit interrupt flag 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG2</name>
                        <description>eUSCI_B receive interrupt flag 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG2</name>
                        <description>eUSCI_B transmit interrupt flag 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG3</name>
                        <description>eUSCI_B receive interrupt flag 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG3</name>
                        <description>eUSCI_B transmit interrupt flag 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IFG</name>
                        <description>Bit position 9 interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Bx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_B interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Arbitration lost; Interrupt Flag: UCALIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Not acknowledgment; Interrupt Flag: UCNACKIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start condition received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Stop condition received; Interrupt Flag: UCSTPIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_10</name>
                                <description>Interrupt Source: Slave 3 Data received; Interrupt Flag: UCRXIFG3</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_12</name>
                                <description>Interrupt Source: Slave 3 Transmit buffer empty; Interrupt Flag: UCTXIFG3</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_14</name>
                                <description>Interrupt Source: Slave 2 Data received; Interrupt Flag: UCRXIFG2</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_16</name>
                                <description>Interrupt Source: Slave 2 Transmit buffer empty; Interrupt Flag: UCTXIFG2</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_18</name>
                                <description>Interrupt Source: Slave 1 Data received; Interrupt Flag: UCRXIFG1</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_20</name>
                                <description>Interrupt Source: Slave 1 Transmit buffer empty; Interrupt Flag: UCTXIFG1</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_22</name>
                                <description>Interrupt Source: Data received; Interrupt Flag: UCRXIFG0</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_24</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG0</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_26</name>
                                <description>Interrupt Source: Byte counter zero; Interrupt Flag: UCBCNTIFG</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_28</name>
                                <description>Interrupt Source: Clock low timeout; Interrupt Flag: UCCLTOIFG</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_30</name>
                                <description>Interrupt Source: Nineth bit position; Interrupt Flag: UCBIT9IFG; Priority: Lowest</description>
                                <value>30</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>EUSCI_B3</name>
        <version>356.0</version>
        <description>EUSCI_B3</description>
        <baseAddress>0x40002C00</baseAddress>
        <interrupt>
            <name>EUSCIB3_IRQ</name>
            <description>EUSCIB3 Interrupt</description>
            <value>23</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x30</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>UCBxCTLW0</name>
                  <displayName>CTLW0</displayName>
                  <description>eUSCI_Bx Control Word Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000001c1</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCSWRST</name>
                        <description>Software reset enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWRST_0</name>
                                <description>Disabled. eUSCI_B reset released for operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWRST_1</name>
                                <description>Enabled. eUSCI_B logic held in reset state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTT</name>
                        <description>Transmit START condition in master mode</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTT_0</name>
                                <description>Do not generate START condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTT_1</name>
                                <description>Generate START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXSTP</name>
                        <description>Transmit STOP condition in master mode</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXSTP_0</name>
                                <description>No STOP generated</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXSTP_1</name>
                                <description>Generate STOP</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXNACK</name>
                        <description>Transmit a NACK</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXNACK_0</name>
                                <description>Acknowledge normally</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXNACK_1</name>
                                <description>Generate NACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTR</name>
                        <description>Transmitter/receiver</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTR_0</name>
                                <description>Receiver</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTR_1</name>
                                <description>Transmitter</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXACK</name>
                        <description>Transmit ACK condition in slave mode</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXACK_0</name>
                                <description>Do not acknowledge the slave address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXACK_1</name>
                                <description>Acknowledge the slave address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSSEL</name>
                        <description>eUSCI_B clock source select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSSEL_0</name>
                                <description>UCLKI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_2</name>
                                <description>SMCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSSEL_3</name>
                                <description>SMCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSYNC</name>
                        <description>Synchronous mode enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSYNC_0</name>
                                <description>Asynchronous mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSYNC_1</name>
                                <description>Synchronous mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMODE</name>
                        <description>eUSCI_B mode</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMODE_0</name>
                                <description>3-pin SPI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_1</name>
                                <description>4-pin SPI (master or slave enabled if STE = 1)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_2</name>
                                <description>4-pin SPI (master or slave enabled if STE = 0)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMODE_3</name>
                                <description>I2C mode</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMST</name>
                        <description>Master mode select</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMST_0</name>
                                <description>Slave mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMST_1</name>
                                <description>Master mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCMM</name>
                        <description>Multi-master environment select</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCMM_0</name>
                                <description>Single master environment. There is no other master in the system. The address compare unit is disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCMM_1</name>
                                <description>Multi-master environment</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSLA10</name>
                        <description>Slave addressing mode select</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSLA10_0</name>
                                <description>Address slave with 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSLA10_1</name>
                                <description>Address slave with 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCA10</name>
                        <description>Own addressing mode select</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCA10_0</name>
                                <description>Own address is a 7-bit address</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCA10_1</name>
                                <description>Own address is a 10-bit address</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxCTLW1</name>
                  <displayName>CTLW1</displayName>
                  <description>eUSCI_Bx Control Word Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCGLIT</name>
                        <description>Deglitch time</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGLIT_0</name>
                                <description>50 ns</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_1</name>
                                <description>25 ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_2</name>
                                <description>12.5 ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGLIT_3</name>
                                <description>6.25 ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCASTP</name>
                        <description>Automatic STOP condition generation</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCASTP_0</name>
                                <description>No automatic STOP generation. The STOP condition is generated after the user sets the UCTXSTP bit. The value in UCBxTBCNT is a don't care.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_1</name>
                                <description>UCBCNTIFG is set with the byte counter reaches the threshold defined in UCBxTBCNT</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCASTP_2</name>
                                <description>A STOP condition is generated automatically after the byte counter value reached UCBxTBCNT. UCBCNTIFG is set with the byte counter reaching the threshold</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSWACK</name>
                        <description>SW or HW ACK control</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSWACK_0</name>
                                <description>The address acknowledge of the slave is controlled by the eUSCI_B module</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSWACK_1</name>
                                <description>The user needs to trigger the sending of the address ACK by issuing UCTXACK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPNACK</name>
                        <description>ACK all master bytes</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPNACK_0</name>
                                <description>Send a non-acknowledge before the STOP condition as a master receiver (conform to I2C standard)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPNACK_1</name>
                                <description>All bytes are acknowledged by the eUSCI_B when configured as master receiver</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTO</name>
                        <description>Clock low timeout select</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTO_0</name>
                                <description>Disable clock low timeout counter</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_1</name>
                                <description>135 000 SYSCLK cycles (approximately 28 ms)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_2</name>
                                <description>150 000 SYSCLK cycles (approximately 31 ms)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTO_3</name>
                                <description>165 000 SYSCLK cycles (approximately 34 ms)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCETXINT</name>
                        <description>Early UCTXIFG0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCETXINT_0</name>
                                <description>UCTXIFGx is set after an address match with UCxI2COAx and the direction bit indicating slave transmit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCETXINT_1</name>
                                <description>UCTXIFG0 is set for each START condition</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxBRW</name>
                  <displayName>BRW</displayName>
                  <description>eUSCI_Bx Baud Rate Control Word Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBR</name>
                        <description>Bit clock prescaler</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxSTATW</name>
                  <displayName>STATW</displayName>
                  <description>eUSCI_Bx Status Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCBBUSY</name>
                        <description>Bus busy</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCBBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCBBUSY_0</name>
                                <description>Bus inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBBUSY_1</name>
                                <description>Bus busy</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGC</name>
                        <description>General call address received</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCGC_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCGC_0</name>
                                <description>No general call address received</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGC_1</name>
                                <description>General call address received</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSCLLOW</name>
                        <description>SCL low</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCSCLLOW_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCSCLLOW_0</name>
                                <description>SCL is not held low</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSCLLOW_1</name>
                                <description>SCL is held low</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNT</name>
                        <description>Hardware byte counter value</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTBCNT</name>
                  <displayName>TBCNT</displayName>
                  <description>eUSCI_Bx Byte Counter Threshold Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTBCNT</name>
                        <description>Byte counter threshold value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxRXBUF</name>
                  <displayName>RXBUF</displayName>
                  <description>eUSCI_Bx Receive Buffer Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXBUF</name>
                        <description>Receive data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxTXBUF</name>
                  <displayName>TXBUF</displayName>
                  <description>eUSCI_Bx Transmit Buffer Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCTXBUF</name>
                        <description>Transmit data buffer</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA0</name>
                  <displayName>I2COA0</displayName>
                  <description>eUSCI_Bx I2C Own Address 0 Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA0</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA0 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA0 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCGCEN</name>
                        <description>General call response enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCGCEN_0</name>
                                <description>Do not respond to a general call</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCGCEN_1</name>
                                <description>Respond to a general call</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA1</name>
                  <displayName>I2COA1</displayName>
                  <description>eUSCI_Bx I2C Own Address 1 Register</description>
                  <addressOffset>0x16</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA1</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA1 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA1 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA2</name>
                  <displayName>I2COA2</displayName>
                  <description>eUSCI_Bx I2C Own Address 2 Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA2</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA2 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA2 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2COA3</name>
                  <displayName>I2COA3</displayName>
                  <description>eUSCI_Bx I2C Own Address 3 Register</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2COA3</name>
                        <description>I2C own address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UCOAEN</name>
                        <description>Own Address enable register</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCOAEN_0</name>
                                <description>The slave address defined in I2COA3 is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCOAEN_1</name>
                                <description>The slave address defined in I2COA3 is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDRX</name>
                  <displayName>ADDRX</displayName>
                  <description>eUSCI_Bx I2C Received Address Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDRX</name>
                        <description>Received Address Register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxADDMASK</name>
                  <displayName>ADDMASK</displayName>
                  <description>eUSCI_Bx I2C Address Mask Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000003ff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDMASK</name>
                        <description>Address Mask Register. By clearing the corresponding bit of the own address, this bit is a don't care when comparing the address on the bus to the own address. Using this method, it is possible to react on more than one slave address. When all bits of ADDMASKx are set, the address mask feature is deactivated.
Modify only when UCSWRST = 1.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxI2CSA</name>
                  <displayName>I2CSA</displayName>
                  <description>eUSCI_Bx I2C Slave Address Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>I2CSA</name>
                        <description>I2C slave address</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIE</name>
                  <displayName>IE</displayName>
                  <description>eUSCI_Bx Interrupt Enable Register</description>
                  <addressOffset>0x2A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIE0</name>
                        <description>Receive interrupt enable 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE0</name>
                        <description>Transmit interrupt enable 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIE</name>
                        <description>START condition interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIE</name>
                        <description>STOP condition interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIE</name>
                        <description>Arbitration lost interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIE</name>
                        <description>Not-acknowledge interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIE</name>
                        <description>Byte counter interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIE</name>
                        <description>Clock low timeout interrupt enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE1</name>
                        <description>Receive interrupt enable 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE1</name>
                        <description>Transmit interrupt enable 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE2</name>
                        <description>Receive interrupt enable 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE2</name>
                        <description>Transmit interrupt enable 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIE3</name>
                        <description>Receive interrupt enable 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIE3</name>
                        <description>Transmit interrupt enable 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IE</name>
                        <description>Bit position 9 interrupt enable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIFG</name>
                  <displayName>IFG</displayName>
                  <description>eUSCI_Bx Interrupt Flag Register</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000002</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCRXIFG0</name>
                        <description>eUSCI_B receive interrupt flag 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG0</name>
                        <description>eUSCI_B transmit interrupt flag 0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTTIFG</name>
                        <description>START condition interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCSTPIFG</name>
                        <description>STOP condition interrupt flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCSTPIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCSTPIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCALIFG</name>
                        <description>Arbitration lost interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCALIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCALIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCNACKIFG</name>
                        <description>Not-acknowledge received interrupt flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCNACKIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCNACKIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBCNTIFG</name>
                        <description>Byte counter interrupt flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBCNTIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBCNTIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCCLTOIFG</name>
                        <description>Clock low timeout interrupt flag</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCCLTOIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCCLTOIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG1</name>
                        <description>eUSCI_B receive interrupt flag 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG1</name>
                        <description>eUSCI_B transmit interrupt flag 1</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG2</name>
                        <description>eUSCI_B receive interrupt flag 2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG2</name>
                        <description>eUSCI_B transmit interrupt flag 2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCRXIFG3</name>
                        <description>eUSCI_B receive interrupt flag 3</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCRXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCRXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCTXIFG3</name>
                        <description>eUSCI_B transmit interrupt flag 3</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCTXIFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCTXIFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>UCBIT9IFG</name>
                        <description>Bit position 9 interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>UCBIT9IFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCBIT9IFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>UCBxIV</name>
                  <displayName>IV</displayName>
                  <description>eUSCI_Bx Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>UCIV</name>
                        <description>eUSCI_B interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>UCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>UCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_2</name>
                                <description>Interrupt Source: Arbitration lost; Interrupt Flag: UCALIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_4</name>
                                <description>Interrupt Source: Not acknowledgment; Interrupt Flag: UCNACKIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_6</name>
                                <description>Interrupt Source: Start condition received; Interrupt Flag: UCSTTIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_8</name>
                                <description>Interrupt Source: Stop condition received; Interrupt Flag: UCSTPIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_10</name>
                                <description>Interrupt Source: Slave 3 Data received; Interrupt Flag: UCRXIFG3</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_12</name>
                                <description>Interrupt Source: Slave 3 Transmit buffer empty; Interrupt Flag: UCTXIFG3</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_14</name>
                                <description>Interrupt Source: Slave 2 Data received; Interrupt Flag: UCRXIFG2</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_16</name>
                                <description>Interrupt Source: Slave 2 Transmit buffer empty; Interrupt Flag: UCTXIFG2</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_18</name>
                                <description>Interrupt Source: Slave 1 Data received; Interrupt Flag: UCRXIFG1</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_20</name>
                                <description>Interrupt Source: Slave 1 Transmit buffer empty; Interrupt Flag: UCTXIFG1</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_22</name>
                                <description>Interrupt Source: Data received; Interrupt Flag: UCRXIFG0</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_24</name>
                                <description>Interrupt Source: Transmit buffer empty; Interrupt Flag: UCTXIFG0</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_26</name>
                                <description>Interrupt Source: Byte counter zero; Interrupt Flag: UCBCNTIFG</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_28</name>
                                <description>Interrupt Source: Clock low timeout; Interrupt Flag: UCCLTOIFG</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>UCIV_30</name>
                                <description>Interrupt Source: Nineth bit position; Interrupt Flag: UCBIT9IFG; Priority: Lowest</description>
                                <value>30</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>REF_A</name>
        <version>356.0</version>
        <description>REF_A</description>
        <baseAddress>0x40003000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0xC</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>REFCTL0</name>
                  <displayName>CTL0</displayName>
                  <description>REF Control Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>REFON</name>
                        <description>Reference enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFON_0</name>
                                <description>Disables reference if no other reference requests are pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFON_1</name>
                                <description>Enables reference in static mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFOUT</name>
                        <description>Reference output buffer</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFOUT_0</name>
                                <description>Reference output not available externally</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFOUT_1</name>
                                <description>Reference output available externally. If ADC14REFBURST = 0, output is available continuously. If ADC14REFBURST = 1, output is available only during an ADC14 conversion.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFTCOFF</name>
                        <description>Temperature sensor disabled</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFTCOFF_0</name>
                                <description>Temperature sensor enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFTCOFF_1</name>
                                <description>Temperature sensor disabled to save power</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFVSEL</name>
                        <description>Reference voltage level select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFVSEL_0</name>
                                <description>1.2 V available when reference requested or REFON = 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFVSEL_1</name>
                                <description>1.45 V available when reference requested or REFON = 1</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFVSEL_3</name>
                                <description>2.5 V available when reference requested or REFON = 1</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFGENOT</name>
                        <description>Reference generator one-time trigger</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFGENOT_0</name>
                                <description>No trigger</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFGENOT_1</name>
                                <description>Generation of the reference voltage is started by writing 1 or by a hardware trigger</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFBGOT</name>
                        <description>Bandgap and bandgap buffer one-time trigger</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFBGOT_0</name>
                                <description>No trigger</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFBGOT_1</name>
                                <description>Generation of the bandgap voltage is started by writing 1 or by a hardware trigger</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFGENACT</name>
                        <description>Reference generator active</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>REFGENACT_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>REFGENACT_0</name>
                                <description>Reference generator not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFGENACT_1</name>
                                <description>Reference generator active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFBGACT</name>
                        <description>Reference bandgap active</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>REFBGACT_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>REFBGACT_0</name>
                                <description>Reference bandgap buffer not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFBGACT_1</name>
                                <description>Reference bandgap buffer active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFGENBUSY</name>
                        <description>Reference generator busy</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>REFGENBUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>REFGENBUSY_0</name>
                                <description>Reference generator not busy</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFGENBUSY_1</name>
                                <description>Reference generator busy</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BGMODE</name>
                        <description>Bandgap mode</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>BGMODE_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>BGMODE_0</name>
                                <description>Static mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BGMODE_1</name>
                                <description>Sampled mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFGENRDY</name>
                        <description>Variable reference voltage ready status</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>REFGENRDY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>REFGENRDY_0</name>
                                <description>Reference voltage output is not ready to be used</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFGENRDY_1</name>
                                <description>Reference voltage output is ready to be used</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFBGRDY</name>
                        <description>Buffered bandgap voltage ready status</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>REFBGRDY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>REFBGRDY_0</name>
                                <description>Buffered bandgap voltage is not ready to be used</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFBGRDY_1</name>
                                <description>Buffered bandgap voltage is ready to be used</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>COMP_E0</name>
        <version>356.0</version>
        <description>COMP_E0</description>
        <baseAddress>0x40003400</baseAddress>
        <interrupt>
            <name>COMP_E0_IRQ</name>
            <description>COMP_E0 Interrupt</description>
            <value>6</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x10</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>CExCTL0</name>
                  <displayName>CTL0</displayName>
                  <description>Comparator Control Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEIPSEL</name>
                        <description>Channel input selected for the V+ terminal</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIPSEL_0</name>
                                <description>Channel 0 selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_1</name>
                                <description>Channel 1 selected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_2</name>
                                <description>Channel 2 selected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_3</name>
                                <description>Channel 3 selected</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_4</name>
                                <description>Channel 4 selected</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_5</name>
                                <description>Channel 5 selected</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_6</name>
                                <description>Channel 6 selected</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_7</name>
                                <description>Channel 7 selected</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_8</name>
                                <description>Channel 8 selected</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_9</name>
                                <description>Channel 9 selected</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_10</name>
                                <description>Channel 10 selected</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_11</name>
                                <description>Channel 11 selected</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_12</name>
                                <description>Channel 12 selected</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_13</name>
                                <description>Channel 13 selected</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_14</name>
                                <description>Channel 14 selected</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_15</name>
                                <description>Channel 15 selected</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIPEN</name>
                        <description>Channel input enable for the V+ terminal</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIPEN_0</name>
                                <description>Selected analog input channel for V+ terminal is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPEN_1</name>
                                <description>Selected analog input channel for V+ terminal is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIMSEL</name>
                        <description>Channel input selected for the - terminal</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIMSEL_0</name>
                                <description>Channel 0 selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_1</name>
                                <description>Channel 1 selected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_2</name>
                                <description>Channel 2 selected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_3</name>
                                <description>Channel 3 selected</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_4</name>
                                <description>Channel 4 selected</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_5</name>
                                <description>Channel 5 selected</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_6</name>
                                <description>Channel 6 selected</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_7</name>
                                <description>Channel 7 selected</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_8</name>
                                <description>Channel 8 selected</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_9</name>
                                <description>Channel 9 selected</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_10</name>
                                <description>Channel 10 selected</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_11</name>
                                <description>Channel 11 selected</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_12</name>
                                <description>Channel 12 selected</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_13</name>
                                <description>Channel 13 selected</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_14</name>
                                <description>Channel 14 selected</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_15</name>
                                <description>Channel 15 selected</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIMEN</name>
                        <description>Channel input enable for the - terminal</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIMEN_0</name>
                                <description>Selected analog input channel for V- terminal is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMEN_1</name>
                                <description>Selected analog input channel for V- terminal is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExCTL1</name>
                  <displayName>CTL1</displayName>
                  <description>Comparator Control Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEOUT</name>
                        <description>Comparator output value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CEOUTPOL</name>
                        <description>Comparator output polarity</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEOUTPOL_0</name>
                                <description>Noninverted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEOUTPOL_1</name>
                                <description>Inverted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEF</name>
                        <description>Comparator output filter</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEF_0</name>
                                <description>Comparator output is not filtered</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEF_1</name>
                                <description>Comparator output is filtered</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIES</name>
                        <description>Interrupt edge select for CEIIFG and CEIFG</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIES_0</name>
                                <description>Rising edge for CEIFG, falling edge for CEIIFG</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIES_1</name>
                                <description>Falling edge for CEIFG, rising edge for CEIIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CESHORT</name>
                        <description>Input short</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CESHORT_0</name>
                                <description>Inputs not shorted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CESHORT_1</name>
                                <description>Inputs shorted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEEX</name>
                        <description>Exchange</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CEFDLY</name>
                        <description>Filter delay</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEFDLY_0</name>
                                <description>Typical filter delay of TBD (450) ns</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEFDLY_1</name>
                                <description>Typical filter delay of TBD (900) ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEFDLY_2</name>
                                <description>Typical filter delay of TBD (1800) ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEFDLY_3</name>
                                <description>Typical filter delay of TBD (3600) ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPWRMD</name>
                        <description>Power Mode</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPWRMD_0</name>
                                <description>High-speed mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPWRMD_1</name>
                                <description>Normal mode</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPWRMD_2</name>
                                <description>Ultra-low power mode</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEON</name>
                        <description>Comparator On</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEON_0</name>
                                <description>Off</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEON_1</name>
                                <description>On</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEMRVL</name>
                        <description>This bit is valid of CEMRVS is set to 1</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEMRVL_0</name>
                                <description>VREF0 is selected if CERS = 00, 01, or 10</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEMRVL_1</name>
                                <description>VREF1 is selected if CERS = 00, 01, or 10</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEMRVS</name>
                        <description>This bit defines if the comparator output selects between VREF0 or VREF1 if CERS = 00, 01, or 10.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEMRVS_0</name>
                                <description>Comparator output state selects between VREF0 or VREF1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEMRVS_1</name>
                                <description>CEMRVL selects between VREF0 or VREF1</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExCTL2</name>
                  <displayName>CTL2</displayName>
                  <description>Comparator Control Register 2</description>
                  <addressOffset>0x4</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEREF0</name>
                        <description>Reference resistor tap 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREF0_0</name>
                                <description>Reference resistor tap for setting 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_1</name>
                                <description>Reference resistor tap for setting 1.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_2</name>
                                <description>Reference resistor tap for setting 2.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_3</name>
                                <description>Reference resistor tap for setting 3.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_4</name>
                                <description>Reference resistor tap for setting 4.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_5</name>
                                <description>Reference resistor tap for setting 5.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_6</name>
                                <description>Reference resistor tap for setting 6.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_7</name>
                                <description>Reference resistor tap for setting 7.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_8</name>
                                <description>Reference resistor tap for setting 8.</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_9</name>
                                <description>Reference resistor tap for setting 9.</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_10</name>
                                <description>Reference resistor tap for setting 10.</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_11</name>
                                <description>Reference resistor tap for setting 11.</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_12</name>
                                <description>Reference resistor tap for setting 12.</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_13</name>
                                <description>Reference resistor tap for setting 13.</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_14</name>
                                <description>Reference resistor tap for setting 14.</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_15</name>
                                <description>Reference resistor tap for setting 15.</description>
                                <value>15</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_16</name>
                                <description>Reference resistor tap for setting 16.</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_17</name>
                                <description>Reference resistor tap for setting 17.</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_18</name>
                                <description>Reference resistor tap for setting 18.</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_19</name>
                                <description>Reference resistor tap for setting 19.</description>
                                <value>19</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_20</name>
                                <description>Reference resistor tap for setting 20.</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_21</name>
                                <description>Reference resistor tap for setting 21.</description>
                                <value>21</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_22</name>
                                <description>Reference resistor tap for setting 22.</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_23</name>
                                <description>Reference resistor tap for setting 23.</description>
                                <value>23</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_24</name>
                                <description>Reference resistor tap for setting 24.</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_25</name>
                                <description>Reference resistor tap for setting 25.</description>
                                <value>25</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_26</name>
                                <description>Reference resistor tap for setting 26.</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_27</name>
                                <description>Reference resistor tap for setting 27.</description>
                                <value>27</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_28</name>
                                <description>Reference resistor tap for setting 28.</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_29</name>
                                <description>Reference resistor tap for setting 29.</description>
                                <value>29</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_30</name>
                                <description>Reference resistor tap for setting 30.</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_31</name>
                                <description>Reference resistor tap for setting 31.</description>
                                <value>31</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERSEL</name>
                        <description>Reference select</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERSEL_0</name>
                                <description>When CEEX = 0, VREF is applied to the V+ terminal; When CEEX = 1, VREF is applied to the V- terminal</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERSEL_1</name>
                                <description>When CEEX = 0, VREF is applied to the V- terminal; When CEEX = 1, VREF is applied to the V+ terminal</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERS</name>
                        <description>Reference source</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERS_0</name>
                                <description>No current is drawn by the reference circuitry</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERS_1</name>
                                <description>VCC applied to the resistor ladder</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERS_2</name>
                                <description>Shared reference voltage applied to the resistor ladder</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERS_3</name>
                                <description>Shared reference voltage supplied to V(CREF). Resistor ladder is off</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEREF1</name>
                        <description>Reference resistor tap 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREF1_0</name>
                                <description>Reference resistor tap for setting 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_1</name>
                                <description>Reference resistor tap for setting 1.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_2</name>
                                <description>Reference resistor tap for setting 2.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_3</name>
                                <description>Reference resistor tap for setting 3.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_4</name>
                                <description>Reference resistor tap for setting 4.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_5</name>
                                <description>Reference resistor tap for setting 5.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_6</name>
                                <description>Reference resistor tap for setting 6.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_7</name>
                                <description>Reference resistor tap for setting 7.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_8</name>
                                <description>Reference resistor tap for setting 8.</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_9</name>
                                <description>Reference resistor tap for setting 9.</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_10</name>
                                <description>Reference resistor tap for setting 10.</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_11</name>
                                <description>Reference resistor tap for setting 11.</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_12</name>
                                <description>Reference resistor tap for setting 12.</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_13</name>
                                <description>Reference resistor tap for setting 13.</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_14</name>
                                <description>Reference resistor tap for setting 14.</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_15</name>
                                <description>Reference resistor tap for setting 15.</description>
                                <value>15</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_16</name>
                                <description>Reference resistor tap for setting 16.</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_17</name>
                                <description>Reference resistor tap for setting 17.</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_18</name>
                                <description>Reference resistor tap for setting 18.</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_19</name>
                                <description>Reference resistor tap for setting 19.</description>
                                <value>19</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_20</name>
                                <description>Reference resistor tap for setting 20.</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_21</name>
                                <description>Reference resistor tap for setting 21.</description>
                                <value>21</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_22</name>
                                <description>Reference resistor tap for setting 22.</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_23</name>
                                <description>Reference resistor tap for setting 23.</description>
                                <value>23</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_24</name>
                                <description>Reference resistor tap for setting 24.</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_25</name>
                                <description>Reference resistor tap for setting 25.</description>
                                <value>25</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_26</name>
                                <description>Reference resistor tap for setting 26.</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_27</name>
                                <description>Reference resistor tap for setting 27.</description>
                                <value>27</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_28</name>
                                <description>Reference resistor tap for setting 28.</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_29</name>
                                <description>Reference resistor tap for setting 29.</description>
                                <value>29</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_30</name>
                                <description>Reference resistor tap for setting 30.</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_31</name>
                                <description>Reference resistor tap for setting 31.</description>
                                <value>31</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEREFL</name>
                        <description>Reference voltage level</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREFL_0</name>
                                <description>Reference amplifier is disabled. No reference voltage is requested</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFL_1</name>
                                <description>1.2 V is selected as shared reference voltage input</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFL_2</name>
                                <description>2.0 V is selected as shared reference voltage input</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFL_3</name>
                                <description>2.5 V is selected as shared reference voltage input</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEREFACC</name>
                        <description>Reference accuracy</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREFACC_0</name>
                                <description>Static mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFACC_1</name>
                                <description>Clocked (low power, low accuracy) mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExCTL3</name>
                  <displayName>CTL3</displayName>
                  <description>Comparator Control Register 3</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEPD0</name>
                        <description>Port disable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD0_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD0_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD1</name>
                        <description>Port disable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD1_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD1_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD2</name>
                        <description>Port disable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD2_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD2_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD3</name>
                        <description>Port disable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD3_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD3_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD4</name>
                        <description>Port disable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD4_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD4_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD5</name>
                        <description>Port disable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD5_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD5_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD6</name>
                        <description>Port disable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD6_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD6_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD7</name>
                        <description>Port disable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD7_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD7_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD8</name>
                        <description>Port disable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD8_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD8_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD9</name>
                        <description>Port disable</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD9_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD9_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD10</name>
                        <description>Port disable</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD10_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD10_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD11</name>
                        <description>Port disable</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD11_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD11_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD12</name>
                        <description>Port disable</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD12_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD12_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD13</name>
                        <description>Port disable</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD13_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD13_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD14</name>
                        <description>Port disable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD14_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD14_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD15</name>
                        <description>Port disable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD15_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD15_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExINT</name>
                  <displayName>INT</displayName>
                  <description>Comparator Interrupt Control Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEIFG</name>
                        <description>Comparator output interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIIFG</name>
                        <description>Comparator output inverted interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERDYIFG</name>
                        <description>Comparator ready interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERDYIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERDYIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIE</name>
                        <description>Comparator output interrupt enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIIE</name>
                        <description>Comparator output interrupt enable inverted polarity</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERDYIE</name>
                        <description>Comparator ready interrupt enable</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERDYIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERDYIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExIV</name>
                  <displayName>IV</displayName>
                  <description>Comparator Interrupt Vector Word Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEIV</name>
                        <description>Comparator interrupt vector word register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CEIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>CEIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIV_2</name>
                                <description>Interrupt Source: CEOUT interrupt; Interrupt Flag: CEIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIV_4</name>
                                <description>Interrupt Source: CEOUT interrupt inverted polarity; Interrupt Flag: CEIIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIV_10</name>
                                <description>Interrupt Source: Comparator ready interrupt; Interrupt Flag: CERDYIFG; Interrupt Priority: Lowest</description>
                                <value>10</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>COMP_E1</name>
        <version>356.0</version>
        <description>COMP_E1</description>
        <baseAddress>0x40003800</baseAddress>
        <interrupt>
            <name>COMP_E1_IRQ</name>
            <description>COMP_E1 Interrupt</description>
            <value>7</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x10</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>CExCTL0</name>
                  <displayName>CTL0</displayName>
                  <description>Comparator Control Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEIPSEL</name>
                        <description>Channel input selected for the V+ terminal</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIPSEL_0</name>
                                <description>Channel 0 selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_1</name>
                                <description>Channel 1 selected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_2</name>
                                <description>Channel 2 selected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_3</name>
                                <description>Channel 3 selected</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_4</name>
                                <description>Channel 4 selected</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_5</name>
                                <description>Channel 5 selected</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_6</name>
                                <description>Channel 6 selected</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_7</name>
                                <description>Channel 7 selected</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_8</name>
                                <description>Channel 8 selected</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_9</name>
                                <description>Channel 9 selected</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_10</name>
                                <description>Channel 10 selected</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_11</name>
                                <description>Channel 11 selected</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_12</name>
                                <description>Channel 12 selected</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_13</name>
                                <description>Channel 13 selected</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_14</name>
                                <description>Channel 14 selected</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPSEL_15</name>
                                <description>Channel 15 selected</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIPEN</name>
                        <description>Channel input enable for the V+ terminal</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIPEN_0</name>
                                <description>Selected analog input channel for V+ terminal is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIPEN_1</name>
                                <description>Selected analog input channel for V+ terminal is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIMSEL</name>
                        <description>Channel input selected for the - terminal</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIMSEL_0</name>
                                <description>Channel 0 selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_1</name>
                                <description>Channel 1 selected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_2</name>
                                <description>Channel 2 selected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_3</name>
                                <description>Channel 3 selected</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_4</name>
                                <description>Channel 4 selected</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_5</name>
                                <description>Channel 5 selected</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_6</name>
                                <description>Channel 6 selected</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_7</name>
                                <description>Channel 7 selected</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_8</name>
                                <description>Channel 8 selected</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_9</name>
                                <description>Channel 9 selected</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_10</name>
                                <description>Channel 10 selected</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_11</name>
                                <description>Channel 11 selected</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_12</name>
                                <description>Channel 12 selected</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_13</name>
                                <description>Channel 13 selected</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_14</name>
                                <description>Channel 14 selected</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMSEL_15</name>
                                <description>Channel 15 selected</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIMEN</name>
                        <description>Channel input enable for the - terminal</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIMEN_0</name>
                                <description>Selected analog input channel for V- terminal is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIMEN_1</name>
                                <description>Selected analog input channel for V- terminal is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExCTL1</name>
                  <displayName>CTL1</displayName>
                  <description>Comparator Control Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEOUT</name>
                        <description>Comparator output value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CEOUTPOL</name>
                        <description>Comparator output polarity</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEOUTPOL_0</name>
                                <description>Noninverted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEOUTPOL_1</name>
                                <description>Inverted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEF</name>
                        <description>Comparator output filter</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEF_0</name>
                                <description>Comparator output is not filtered</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEF_1</name>
                                <description>Comparator output is filtered</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIES</name>
                        <description>Interrupt edge select for CEIIFG and CEIFG</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIES_0</name>
                                <description>Rising edge for CEIFG, falling edge for CEIIFG</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIES_1</name>
                                <description>Falling edge for CEIFG, rising edge for CEIIFG</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CESHORT</name>
                        <description>Input short</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CESHORT_0</name>
                                <description>Inputs not shorted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CESHORT_1</name>
                                <description>Inputs shorted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEEX</name>
                        <description>Exchange</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CEFDLY</name>
                        <description>Filter delay</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEFDLY_0</name>
                                <description>Typical filter delay of TBD (450) ns</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEFDLY_1</name>
                                <description>Typical filter delay of TBD (900) ns</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEFDLY_2</name>
                                <description>Typical filter delay of TBD (1800) ns</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEFDLY_3</name>
                                <description>Typical filter delay of TBD (3600) ns</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPWRMD</name>
                        <description>Power Mode</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPWRMD_0</name>
                                <description>High-speed mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPWRMD_1</name>
                                <description>Normal mode</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPWRMD_2</name>
                                <description>Ultra-low power mode</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEON</name>
                        <description>Comparator On</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEON_0</name>
                                <description>Off</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEON_1</name>
                                <description>On</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEMRVL</name>
                        <description>This bit is valid of CEMRVS is set to 1</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEMRVL_0</name>
                                <description>VREF0 is selected if CERS = 00, 01, or 10</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEMRVL_1</name>
                                <description>VREF1 is selected if CERS = 00, 01, or 10</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEMRVS</name>
                        <description>This bit defines if the comparator output selects between VREF0 or VREF1 if CERS = 00, 01, or 10.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEMRVS_0</name>
                                <description>Comparator output state selects between VREF0 or VREF1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEMRVS_1</name>
                                <description>CEMRVL selects between VREF0 or VREF1</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExCTL2</name>
                  <displayName>CTL2</displayName>
                  <description>Comparator Control Register 2</description>
                  <addressOffset>0x4</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEREF0</name>
                        <description>Reference resistor tap 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREF0_0</name>
                                <description>Reference resistor tap for setting 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_1</name>
                                <description>Reference resistor tap for setting 1.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_2</name>
                                <description>Reference resistor tap for setting 2.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_3</name>
                                <description>Reference resistor tap for setting 3.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_4</name>
                                <description>Reference resistor tap for setting 4.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_5</name>
                                <description>Reference resistor tap for setting 5.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_6</name>
                                <description>Reference resistor tap for setting 6.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_7</name>
                                <description>Reference resistor tap for setting 7.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_8</name>
                                <description>Reference resistor tap for setting 8.</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_9</name>
                                <description>Reference resistor tap for setting 9.</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_10</name>
                                <description>Reference resistor tap for setting 10.</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_11</name>
                                <description>Reference resistor tap for setting 11.</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_12</name>
                                <description>Reference resistor tap for setting 12.</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_13</name>
                                <description>Reference resistor tap for setting 13.</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_14</name>
                                <description>Reference resistor tap for setting 14.</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_15</name>
                                <description>Reference resistor tap for setting 15.</description>
                                <value>15</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_16</name>
                                <description>Reference resistor tap for setting 16.</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_17</name>
                                <description>Reference resistor tap for setting 17.</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_18</name>
                                <description>Reference resistor tap for setting 18.</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_19</name>
                                <description>Reference resistor tap for setting 19.</description>
                                <value>19</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_20</name>
                                <description>Reference resistor tap for setting 20.</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_21</name>
                                <description>Reference resistor tap for setting 21.</description>
                                <value>21</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_22</name>
                                <description>Reference resistor tap for setting 22.</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_23</name>
                                <description>Reference resistor tap for setting 23.</description>
                                <value>23</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_24</name>
                                <description>Reference resistor tap for setting 24.</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_25</name>
                                <description>Reference resistor tap for setting 25.</description>
                                <value>25</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_26</name>
                                <description>Reference resistor tap for setting 26.</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_27</name>
                                <description>Reference resistor tap for setting 27.</description>
                                <value>27</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_28</name>
                                <description>Reference resistor tap for setting 28.</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_29</name>
                                <description>Reference resistor tap for setting 29.</description>
                                <value>29</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_30</name>
                                <description>Reference resistor tap for setting 30.</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF0_31</name>
                                <description>Reference resistor tap for setting 31.</description>
                                <value>31</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERSEL</name>
                        <description>Reference select</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERSEL_0</name>
                                <description>When CEEX = 0, VREF is applied to the V+ terminal; When CEEX = 1, VREF is applied to the V- terminal</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERSEL_1</name>
                                <description>When CEEX = 0, VREF is applied to the V- terminal; When CEEX = 1, VREF is applied to the V+ terminal</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERS</name>
                        <description>Reference source</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERS_0</name>
                                <description>No current is drawn by the reference circuitry</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERS_1</name>
                                <description>VCC applied to the resistor ladder</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERS_2</name>
                                <description>Shared reference voltage applied to the resistor ladder</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERS_3</name>
                                <description>Shared reference voltage supplied to V(CREF). Resistor ladder is off</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEREF1</name>
                        <description>Reference resistor tap 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREF1_0</name>
                                <description>Reference resistor tap for setting 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_1</name>
                                <description>Reference resistor tap for setting 1.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_2</name>
                                <description>Reference resistor tap for setting 2.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_3</name>
                                <description>Reference resistor tap for setting 3.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_4</name>
                                <description>Reference resistor tap for setting 4.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_5</name>
                                <description>Reference resistor tap for setting 5.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_6</name>
                                <description>Reference resistor tap for setting 6.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_7</name>
                                <description>Reference resistor tap for setting 7.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_8</name>
                                <description>Reference resistor tap for setting 8.</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_9</name>
                                <description>Reference resistor tap for setting 9.</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_10</name>
                                <description>Reference resistor tap for setting 10.</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_11</name>
                                <description>Reference resistor tap for setting 11.</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_12</name>
                                <description>Reference resistor tap for setting 12.</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_13</name>
                                <description>Reference resistor tap for setting 13.</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_14</name>
                                <description>Reference resistor tap for setting 14.</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_15</name>
                                <description>Reference resistor tap for setting 15.</description>
                                <value>15</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_16</name>
                                <description>Reference resistor tap for setting 16.</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_17</name>
                                <description>Reference resistor tap for setting 17.</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_18</name>
                                <description>Reference resistor tap for setting 18.</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_19</name>
                                <description>Reference resistor tap for setting 19.</description>
                                <value>19</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_20</name>
                                <description>Reference resistor tap for setting 20.</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_21</name>
                                <description>Reference resistor tap for setting 21.</description>
                                <value>21</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_22</name>
                                <description>Reference resistor tap for setting 22.</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_23</name>
                                <description>Reference resistor tap for setting 23.</description>
                                <value>23</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_24</name>
                                <description>Reference resistor tap for setting 24.</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_25</name>
                                <description>Reference resistor tap for setting 25.</description>
                                <value>25</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_26</name>
                                <description>Reference resistor tap for setting 26.</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_27</name>
                                <description>Reference resistor tap for setting 27.</description>
                                <value>27</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_28</name>
                                <description>Reference resistor tap for setting 28.</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_29</name>
                                <description>Reference resistor tap for setting 29.</description>
                                <value>29</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_30</name>
                                <description>Reference resistor tap for setting 30.</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREF1_31</name>
                                <description>Reference resistor tap for setting 31.</description>
                                <value>31</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEREFL</name>
                        <description>Reference voltage level</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREFL_0</name>
                                <description>Reference amplifier is disabled. No reference voltage is requested</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFL_1</name>
                                <description>1.2 V is selected as shared reference voltage input</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFL_2</name>
                                <description>2.0 V is selected as shared reference voltage input</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFL_3</name>
                                <description>2.5 V is selected as shared reference voltage input</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEREFACC</name>
                        <description>Reference accuracy</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEREFACC_0</name>
                                <description>Static mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEREFACC_1</name>
                                <description>Clocked (low power, low accuracy) mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExCTL3</name>
                  <displayName>CTL3</displayName>
                  <description>Comparator Control Register 3</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEPD0</name>
                        <description>Port disable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD0_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD0_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD1</name>
                        <description>Port disable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD1_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD1_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD2</name>
                        <description>Port disable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD2_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD2_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD3</name>
                        <description>Port disable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD3_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD3_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD4</name>
                        <description>Port disable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD4_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD4_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD5</name>
                        <description>Port disable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD5_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD5_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD6</name>
                        <description>Port disable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD6_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD6_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD7</name>
                        <description>Port disable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD7_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD7_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD8</name>
                        <description>Port disable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD8_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD8_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD9</name>
                        <description>Port disable</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD9_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD9_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD10</name>
                        <description>Port disable</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD10_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD10_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD11</name>
                        <description>Port disable</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD11_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD11_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD12</name>
                        <description>Port disable</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD12_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD12_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD13</name>
                        <description>Port disable</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD13_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD13_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD14</name>
                        <description>Port disable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD14_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD14_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEPD15</name>
                        <description>Port disable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEPD15_0</name>
                                <description>The input buffer is enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEPD15_1</name>
                                <description>The input buffer is disabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExINT</name>
                  <displayName>INT</displayName>
                  <description>Comparator Interrupt Control Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEIFG</name>
                        <description>Comparator output interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIIFG</name>
                        <description>Comparator output inverted interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERDYIFG</name>
                        <description>Comparator ready interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERDYIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERDYIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIE</name>
                        <description>Comparator output interrupt enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CEIIE</name>
                        <description>Comparator output interrupt enable inverted polarity</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CEIIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CERDYIE</name>
                        <description>Comparator ready interrupt enable</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CERDYIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CERDYIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CExIV</name>
                  <displayName>IV</displayName>
                  <description>Comparator Interrupt Vector Word Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CEIV</name>
                        <description>Comparator interrupt vector word register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CEIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>CEIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIV_2</name>
                                <description>Interrupt Source: CEOUT interrupt; Interrupt Flag: CEIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIV_4</name>
                                <description>Interrupt Source: CEOUT interrupt inverted polarity; Interrupt Flag: CEIIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CEIV_10</name>
                                <description>Interrupt Source: Comparator ready interrupt; Interrupt Flag: CERDYIFG; Interrupt Priority: Lowest</description>
                                <value>10</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>AES256</name>
        <version>356.0</version>
        <description>AES256</description>
        <baseAddress>0x40003C00</baseAddress>
        <interrupt>
            <name>AES256_IRQ</name>
            <description>AES256 Interrupt</description>
            <value>28</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x10</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>AESACTL0</name>
                  <displayName>CTL0</displayName>
                  <description>AES Accelerator Control Register 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESOPx</name>
                        <description>AES operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESOPx_0</name>
                                <description>Encryption</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESOPx_1</name>
                                <description>Decryption. The provided key is the same key used for encryption</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESOPx_2</name>
                                <description>Generate first round key required for decryption</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESOPx_3</name>
                                <description>Decryption. The provided key is the first round key required for decryption</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESKLx</name>
                        <description>AES key length</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESKLx_0</name>
                                <description>AES128. The key size is 128 bit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESKLx_1</name>
                                <description>AES192. The key size is 192 bit.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESKLx_2</name>
                                <description>AES256. The key size is 256 bit</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESCMx</name>
                        <description>AES cipher mode select</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESCMx_0</name>
                                <description>ECB</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESCMx_1</name>
                                <description>CBC</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESCMx_2</name>
                                <description>OFB</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESCMx_3</name>
                                <description>CFB</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESSWRST</name>
                        <description>AES software reset</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESSWRST_0</name>
                                <description>No reset</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESSWRST_1</name>
                                <description>Reset AES accelerator module</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESRDYIFG</name>
                        <description>AES ready interrupt flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESRDYIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESRDYIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESERRFG</name>
                        <description>AES error flag</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESERRFG_0</name>
                                <description>No error</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESERRFG_1</name>
                                <description>Error occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESRDYIE</name>
                        <description>AES ready interrupt enable</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESRDYIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESRDYIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESCMEN</name>
                        <description>AES cipher mode enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESCMEN_0</name>
                                <description>No DMA triggers are generated</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESCMEN_1</name>
                                <description>DMA ciphermode support operation is enabled and the corresponding DMA triggers are generated</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AESACTL1</name>
                  <displayName>CTL1</displayName>
                  <description>AES Accelerator Control Register 1</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESBLKCNTx</name>
                        <description>Cipher Block Counter</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AESASTAT</name>
                  <displayName>STAT</displayName>
                  <description>AES Accelerator Status Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESBUSY</name>
                        <description>AES accelerator module busy</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESBUSY_0</name>
                                <description>Not busy</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESBUSY_1</name>
                                <description>Busy</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESKEYWR</name>
                        <description>All 16 bytes written to AESAKEY</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESKEYWR_0</name>
                                <description>Not all bytes written</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESKEYWR_1</name>
                                <description>All bytes written</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESDINWR</name>
                        <description>All 16 bytes written to AESADIN, AESAXDIN or AESAXIN</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AESDINWR_0</name>
                                <description>Not all bytes written</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESDINWR_1</name>
                                <description>All bytes written</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESDOUTRD</name>
                        <description>All 16 bytes read from AESADOUT</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>AESDOUTRD_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>AESDOUTRD_0</name>
                                <description>Not all bytes read</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AESDOUTRD_1</name>
                                <description>All bytes read</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AESKEYCNTx</name>
                        <description>Bytes written via AESAKEY for AESKLx=00, half-words written via AESAKEY</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>AESDINCNTx</name>
                        <description>Bytes written via AESADIN, AESAXDIN or AESAXIN</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>AESDOUTCNTx</name>
                        <description>Bytes read via AESADOUT</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AESAKEY</name>
                  <displayName>KEY</displayName>
                  <description>AES Accelerator Key Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESKEY0x</name>
                        <description>AES key byte n when AESAKEY is written as half-word</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AESKEY1x</name>
                        <description>AES key byte n+1 when AESAKEY is written as half-word</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AESADIN</name>
                  <displayName>DIN</displayName>
                  <description>AES Accelerator Data In Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESDIN0x</name>
                        <description>AES data in byte n when AESADIN is written as half-word</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AESDIN1x</name>
                        <description>AES data in byte n+1 when AESADIN is written as half-word</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AESADOUT</name>
                  <displayName>DOUT</displayName>
                  <description>AES Accelerator Data Out Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESDOUT0x</name>
                        <description>AES data out byte n when AESADOUT is read as half-word</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AESDOUT1x</name>
                        <description>AES data out byte n+1 when AESADOUT is read as half-word</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AESAXDIN</name>
                  <displayName>XDIN</displayName>
                  <description>AES Accelerator XORed Data In Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESXDIN0x</name>
                        <description>AES data in byte n when AESAXDIN is written as half-word</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AESXDIN1x</name>
                        <description>AES data in byte n+1 when AESAXDIN is written as half-word</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AESAXIN</name>
                  <displayName>XIN</displayName>
                  <description>AES Accelerator XORed Data In Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>AESXIN0x</name>
                        <description>AES data in byte n when AESAXIN is written as half-word</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AESXIN1x</name>
                        <description>AES data in byte n+1 when AESAXIN is written as half-word</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>CRC32</name>
        <version>356.0</version>
        <description>CRC32</description>
        <baseAddress>0x40004000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x20</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>CRC32DI</name>
                  <displayName>CRC32DI</displayName>
                  <description>Data Input for CRC32 Signature Computation</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC32DI</name>
                        <description>Data input register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC32DIRB</name>
                  <displayName>CRC32DIRB</displayName>
                  <description>Data In Reverse for CRC32 Computation</description>
                  <addressOffset>0x4</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC32DIRB</name>
                        <description>Data input register reversed</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC32INIRES_LO</name>
                  <displayName>CRC32INIRES_LO</displayName>
                  <description>CRC32 Initialization and Result, lower 16 bits</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC32INIRES_LO</name>
                        <description>CRC32 initialization and result, lower 16 bits</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC32INIRES_HI</name>
                  <displayName>CRC32INIRES_HI</displayName>
                  <description>CRC32 Initialization and Result, upper 16 bits</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC32INIRES_HI</name>
                        <description>CRC32 initialization and result, upper 16 bits</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC32RESR_LO</name>
                  <displayName>CRC32RESR_LO</displayName>
                  <description>CRC32 Result Reverse, lower 16 bits</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x0000ffff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC32RESR_LO</name>
                        <description>CRC32 reverse result, lower 16 bits</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC32RESR_HI</name>
                  <displayName>CRC32RESR_HI</displayName>
                  <description>CRC32 Result Reverse, Upper 16 bits</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x0000ffff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC32RESR_HI</name>
                        <description>CRC32 reverse result, upper 16 bits</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC16DI</name>
                  <displayName>CRC16DI</displayName>
                  <description>Data Input for CRC16 computation</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC16DI</name>
                        <description>CRC16 data in</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC16DIRB</name>
                  <displayName>CRC16DIRB</displayName>
                  <description>CRC16 Data In Reverse</description>
                  <addressOffset>0x14</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC16DIRB</name>
                        <description>CRC16 data in reverse byte</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC16INIRES</name>
                  <displayName>CRC16INIRES</displayName>
                  <description>CRC16 Initialization and Result register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x0000ffff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC16INIRES</name>
                        <description>CRC16 initialization and result</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CRC16RESR</name>
                  <displayName>CRC16RESR</displayName>
                  <description>CRC16 Result Reverse</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x0000ffff</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CRC16RESR</name>
                        <description>CRC16 reverse result</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>RTC_C</name>
        <version>356.0</version>
        <description>RTC_C</description>
        <baseAddress>0x40004400</baseAddress>
        <interrupt>
            <name>RTC_C_IRQ</name>
            <description>RTC_C Interrupt</description>
            <value>29</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x20</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>RTCCTL0</name>
                  <displayName>CTL0</displayName>
                  <description>RTCCTL0 Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00009608</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>RTCRDYIFG</name>
                        <description>Real-time clock ready interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCRDYIFG_0</name>
                                <description>RTC cannot be read safely</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCRDYIFG_1</name>
                                <description>RTC can be read safely</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCAIFG</name>
                        <description>Real-time clock alarm interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCAIFG_0</name>
                                <description>No time event occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCAIFG_1</name>
                                <description>Time event occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCTEVIFG</name>
                        <description>Real-time clock time event interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCTEVIFG_0</name>
                                <description>No time event occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCTEVIFG_1</name>
                                <description>Time event occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCOFIFG</name>
                        <description>32-kHz crystal oscillator fault interrupt flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCOFIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCOFIFG_1</name>
                                <description>Interrupt pending. A 32-kHz crystal oscillator fault occurred after last reset.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCRDYIE</name>
                        <description>Real-time clock ready interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCRDYIE_0</name>
                                <description>Interrupt not enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCRDYIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCAIE</name>
                        <description>Real-time clock alarm interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCAIE_0</name>
                                <description>Interrupt not enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCAIE_1</name>
                                <description>Interrupt enabled (LPM3/LPM3.5 wake-up enabled)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCTEVIE</name>
                        <description>Real-time clock time event interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCTEVIE_0</name>
                                <description>Interrupt not enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCTEVIE_1</name>
                                <description>Interrupt enabled (LPM3/LPM3.5 wake-up enabled)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCOFIE</name>
                        <description>32-kHz crystal oscillator fault interrupt enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCOFIE_0</name>
                                <description>Interrupt not enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCOFIE_1</name>
                                <description>Interrupt enabled (LPM3/LPM3.5 wake-up enabled)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCKEY</name>
                        <description>Real-time clock key</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCCTL13</name>
                  <displayName>CTL13</displayName>
                  <description>RTCCTL13 Register</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000070</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>RTCTEV</name>
                        <description>Real-time clock time event</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCTEV_0</name>
                                <description>Minute changed</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCTEV_1</name>
                                <description>Hour changed</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCTEV_2</name>
                                <description>Every day at midnight (00:00)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCTEV_3</name>
                                <description>Every day at noon (12:00)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCSSEL</name>
                        <description>Real-time clock source select</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCSSEL_0</name>
                                <description>BCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCRDY</name>
                        <description>Real-time clock ready</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>RTCRDY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>RTCRDY_0</name>
                                <description>RTC time values in transition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCRDY_1</name>
                                <description>RTC time values safe for reading. This bit indicates when the real-time clock time values are safe for reading.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCMODE</name>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>RTCMODE_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>RTCMODE_1</name>
                                <description>Calendar mode. Always reads a value of 1.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCHOLD</name>
                        <description>Real-time clock hold</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCHOLD_0</name>
                                <description>Real-time clock is operational</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCHOLD_1</name>
                                <description>When set, the calendar is stopped as well as the prescale counters, RT0PS and RT1PS are don't care</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCBCD</name>
                        <description>Real-time clock BCD select</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCBCD_0</name>
                                <description>Binary (hexadecimal) code selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCBCD_1</name>
                                <description>Binary coded decimal (BCD) code selected</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCCALF</name>
                        <description>Real-time clock calibration frequency</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCCALF_0</name>
                                <description>No frequency output to RTCCLK pin</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCCALF_1</name>
                                <description>512 Hz</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCCALF_2</name>
                                <description>256 Hz</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCCALF_3</name>
                                <description>1 Hz</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCOCAL</name>
                  <displayName>OCAL</displayName>
                  <description>RTCOCAL Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>RTCOCAL</name>
                        <description>Real-time clock offset error calibration</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>RTCOCALS</name>
                        <description>Real-time clock offset error calibration sign</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCOCALS_0</name>
                                <description>Down calibration. Frequency adjusted down.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCOCALS_1</name>
                                <description>Up calibration. Frequency adjusted up.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCTCMP</name>
                  <displayName>TCMP</displayName>
                  <description>RTCTCMP Register</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00004000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>RTCTCMP</name>
                        <description>Real-time clock temperature compensation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>RTCTCOK</name>
                        <description>Real-time clock temperature compensation write OK</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>RTCTCOK_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>RTCTCOK_0</name>
                                <description>Write to RTCTCMPx is unsuccessful</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCTCOK_1</name>
                                <description>Write to RTCTCMPx is successful</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RTCTCRDY</name>
                        <description>Real-time clock temperature compensation ready</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>RTCTCMPS</name>
                        <description>Real-time clock temperature compensation sign</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RTCTCMPS_0</name>
                                <description>Down calibration. Frequency adjusted down</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCTCMPS_1</name>
                                <description>Up calibration. Frequency adjusted up</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCPS0CTL</name>
                  <displayName>PS0CTL</displayName>
                  <description>Real-Time Clock Prescale Timer 0 Control Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>RT0PSIFG</name>
                        <description>Prescale timer 0 interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RT0PSIFG_0</name>
                                <description>No time event occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0PSIFG_1</name>
                                <description>Time event occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RT0PSIE</name>
                        <description>Prescale timer 0 interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RT0PSIE_0</name>
                                <description>Interrupt not enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0PSIE_1</name>
                                <description>Interrupt enabled (LPM3/LPM3.5 wake-up enabled)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RT0IP</name>
                        <description>Prescale timer 0 interrupt interval</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RT0IP_0</name>
                                <description>Divide by 2</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0IP_1</name>
                                <description>Divide by 4</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0IP_2</name>
                                <description>Divide by 8</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0IP_3</name>
                                <description>Divide by 16</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0IP_4</name>
                                <description>Divide by 32</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0IP_5</name>
                                <description>Divide by 64</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0IP_6</name>
                                <description>Divide by 128</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT0IP_7</name>
                                <description>Divide by 256</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCPS1CTL</name>
                  <displayName>PS1CTL</displayName>
                  <description>Real-Time Clock Prescale Timer 1 Control Register</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>RT1PSIFG</name>
                        <description>Prescale timer 1 interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RT1PSIFG_0</name>
                                <description>No time event occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1PSIFG_1</name>
                                <description>Time event occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RT1PSIE</name>
                        <description>Prescale timer 1 interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RT1PSIE_0</name>
                                <description>Interrupt not enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1PSIE_1</name>
                                <description>Interrupt enabled (LPM3/LPM3.5 wake-up enabled)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RT1IP</name>
                        <description>Prescale timer 1 interrupt interval</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RT1IP_0</name>
                                <description>Divide by 2</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1IP_1</name>
                                <description>Divide by 4</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1IP_2</name>
                                <description>Divide by 8</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1IP_3</name>
                                <description>Divide by 16</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1IP_4</name>
                                <description>Divide by 32</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1IP_5</name>
                                <description>Divide by 64</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1IP_6</name>
                                <description>Divide by 128</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RT1IP_7</name>
                                <description>Divide by 256</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCPS</name>
                  <displayName>PS</displayName>
                  <description>Real-Time Clock Prescale Timer Counter Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>RT0PS</name>
                        <description>Prescale timer 0 counter value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>RT1PS</name>
                        <description>Prescale timer 1 counter value</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCIV</name>
                  <displayName>IV</displayName>
                  <description>Real-Time Clock Interrupt Vector Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>RTCIV</name>
                        <description>Real-time clock interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>RTCIV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>RTCIV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCIV_2</name>
                                <description>Interrupt Source: RTC oscillator failure; Interrupt Flag: RTCOFIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCIV_4</name>
                                <description>Interrupt Source: RTC ready; Interrupt Flag: RTCRDYIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCIV_6</name>
                                <description>Interrupt Source: RTC interval timer; Interrupt Flag: RTCTEVIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCIV_8</name>
                                <description>Interrupt Source: RTC user alarm; Interrupt Flag: RTCAIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCIV_10</name>
                                <description>Interrupt Source: RTC prescaler 0; Interrupt Flag: RT0PSIFG</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RTCIV_12</name>
                                <description>Interrupt Source: RTC prescaler 1; Interrupt Flag: RT1PSIFG</description>
                                <value>12</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCTIM0</name>
                  <displayName>TIM0</displayName>
                  <description>RTCTIM0 Register  Hexadecimal Format</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000c0c0</resetMask>
                  <fields>
                    <field>
                        <name>Seconds</name>
                        <description>Seconds (0 to 59)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>Minutes</name>
                        <description>Minutes (0 to 59)</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCTIM1</name>
                  <displayName>TIM1</displayName>
                  <description>Real-Time Clock Hour, Day of Week</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000f8e0</resetMask>
                  <fields>
                    <field>
                        <name>Hours</name>
                        <description>Hours (0 to 23)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DayofWeek</name>
                        <description>Day of week (0 to 6)</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCDATE</name>
                  <displayName>DATE</displayName>
                  <description>RTCDATE - Hexadecimal Format</description>
                  <addressOffset>0x14</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000f0e0</resetMask>
                  <fields>
                    <field>
                        <name>Day</name>
                        <description>Day of month (1 to 28, 29, 30, 31)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>Month</name>
                        <description>Month (1 to 12)</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCYEAR</name>
                  <displayName>YEAR</displayName>
                  <description>RTCYEAR Register  Hexadecimal Format</description>
                  <addressOffset>0x16</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000f000</resetMask>
                  <fields>
                    <field>
                        <name>YearLowByte</name>
                        <description>Year  low byte. Valid values for Year are 0 to 4095.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>YearHighByte</name>
                        <description>Year  high byte. Valid values for Year are 0 to 4095.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCAMINHR</name>
                  <displayName>AMINHR</displayName>
                  <description>RTCMINHR - Hexadecimal Format</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00006040</resetMask>
                  <fields>
                    <field>
                        <name>Minutes</name>
                        <description>Minutes (0 to 59)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MINAE</name>
                        <description>Alarm enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>Hours</name>
                        <description>Hours (0 to 23)</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>HOURAE</name>
                        <description>Alarm enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCADOWDAY</name>
                  <displayName>ADOWDAY</displayName>
                  <description>RTCADOWDAY - Hexadecimal Format</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00006078</resetMask>
                  <fields>
                    <field>
                        <name>DayofWeek</name>
                        <description>Day of week (0 to 6)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DOWAE</name>
                        <description>Alarm enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DayofMonth</name>
                        <description>Day of month (1 to 28, 29, 30, 31)</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DAYAE</name>
                        <description>Alarm enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCBIN2BCD</name>
                  <displayName>BIN2BCD</displayName>
                  <description>Binary-to-BCD Conversion Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>BIN2BCD</name>
                        <description>bin to bcd conversion</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RTCBCD2BIN</name>
                  <displayName>BCD2BIN</displayName>
                  <description>BCD-to-Binary Conversion Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>BCD2BIN</name>
                        <description>bcd to bin conversion</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>WDT_A</name>
        <version>356.0</version>
        <description>WDT_A</description>
        <baseAddress>0x40004800</baseAddress>
        <interrupt>
            <name>WDT_A_IRQ</name>
            <description>WDT_A Interrupt</description>
            <value>3</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0xE</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>WDTCTL</name>
                  <displayName>CTL</displayName>
                  <description>Watchdog Timer Control Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00006904</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>WDTIS</name>
                        <description>Watchdog timer interval select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>WDTIS_0</name>
                                <description>Watchdog clock source / (2^(31)) (18:12:16 at 32.768 kHz)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTIS_1</name>
                                <description>Watchdog clock source /(2^(27)) (01:08:16 at 32.768 kHz)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTIS_2</name>
                                <description>Watchdog clock source /(2^(23)) (00:04:16 at 32.768 kHz)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTIS_3</name>
                                <description>Watchdog clock source /(2^(19)) (00:00:16 at 32.768 kHz)</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTIS_4</name>
                                <description>Watchdog clock source /(2^(15)) (1 s at 32.768 kHz)</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTIS_5</name>
                                <description>Watchdog clock source / (2^(13)) (250 ms at 32.768 kHz)</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTIS_6</name>
                                <description>Watchdog clock source / (2^(9)) (15.625 ms at 32.768 kHz)</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTIS_7</name>
                                <description>Watchdog clock source / (2^(6)) (1.95 ms at 32.768 kHz)</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WDTCNTCL</name>
                        <description>Watchdog timer counter clear</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>WDTCNTCL_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>WDTCNTCL_0</name>
                                <description>No action</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTCNTCL_1</name>
                                <description>WDTCNT = 0000h</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WDTTMSEL</name>
                        <description>Watchdog timer mode select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>WDTTMSEL_0</name>
                                <description>Watchdog mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTTMSEL_1</name>
                                <description>Interval timer mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WDTSSEL</name>
                        <description>Watchdog timer clock source select</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>WDTSSEL_0</name>
                                <description>SMCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTSSEL_1</name>
                                <description>ACLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTSSEL_2</name>
                                <description>VLOCLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTSSEL_3</name>
                                <description>BCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WDTHOLD</name>
                        <description>Watchdog timer hold</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>WDTHOLD_0</name>
                                <description>Watchdog timer is not stopped</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WDTHOLD_1</name>
                                <description>Watchdog timer is stopped</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WDTPW</name>
                        <description>Watchdog timer password</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>DIO</name>
        <version>356.0</version>
        <description>DIO</description>
        <baseAddress>0x40004C00</baseAddress>
        <interrupt>
            <name>PORT1_IRQ</name>
            <description>Port1 Interrupt</description>
            <value>35</value>
        </interrupt>
        <interrupt>
            <name>PORT2_IRQ</name>
            <description>Port2 Interrupt</description>
            <value>36</value>
        </interrupt>
        <interrupt>
            <name>PORT3_IRQ</name>
            <description>Port3 Interrupt</description>
            <value>37</value>
        </interrupt>
        <interrupt>
            <name>PORT4_IRQ</name>
            <description>Port4 Interrupt</description>
            <value>38</value>
        </interrupt>
        <interrupt>
            <name>PORT5_IRQ</name>
            <description>Port5 Interrupt</description>
            <value>39</value>
        </interrupt>
        <interrupt>
            <name>PORT6_IRQ</name>
            <description>Port6 Interrupt</description>
            <value>40</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x138</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>PAIN</name>
                  <displayName>PAIN</displayName>
                  <description>Port A Input</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P1IN</name>
                        <description>Port 1 Input</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>P2IN</name>
                        <description>Port 2 Input</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PAOUT</name>
                  <displayName>PAOUT</displayName>
                  <description>Port A Output</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P2OUT</name>
                        <description>Port 2 Output</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P1OUT</name>
                        <description>Port 1 Output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PADIR</name>
                  <displayName>PADIR</displayName>
                  <description>Port A Direction</description>
                  <addressOffset>0x4</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1DIR</name>
                        <description>Port 1 Direction</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2DIR</name>
                        <description>Port 2 Direction</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PAREN</name>
                  <displayName>PAREN</displayName>
                  <description>Port A Resistor Enable</description>
                  <addressOffset>0x6</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1REN</name>
                        <description>Port 1 Resistor Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2REN</name>
                        <description>Port 2 Resistor Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PADS</name>
                  <displayName>PADS</displayName>
                  <description>Port A Drive Strength</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>P1DS</name>
                        <description>Port 1 Drive Strength</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2DS</name>
                        <description>Port 2 Drive Strength</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PASEL0</name>
                  <displayName>PASEL0</displayName>
                  <description>Port A Select 0</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1SEL0</name>
                        <description>Port 1 Select 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2SEL0</name>
                        <description>Port 2 Select 0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PASEL1</name>
                  <displayName>PASEL1</displayName>
                  <description>Port A Select 1</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1SEL1</name>
                        <description>Port 1 Select 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2SEL1</name>
                        <description>Port 2 Select 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P1IV</name>
                  <displayName>P1IV</displayName>
                  <description>Port 1 Interrupt Vector Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1IV</name>
                        <description>Port 1 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P1IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P1IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_2</name>
                                <description>Interrupt Source: Port 1.0 interrupt; Interrupt Flag: P1IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_4</name>
                                <description>Interrupt Source: Port 1.1 interrupt; Interrupt Flag: P1IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_6</name>
                                <description>Interrupt Source: Port 1.2 interrupt; Interrupt Flag: P1IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_8</name>
                                <description>Interrupt Source: Port 1.3 interrupt; Interrupt Flag: P1IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_10</name>
                                <description>Interrupt Source: Port 1.4 interrupt; Interrupt Flag: P1IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_12</name>
                                <description>Interrupt Source: Port 1.5 interrupt; Interrupt Flag: P1IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_14</name>
                                <description>Interrupt Source: Port 1.6 interrupt; Interrupt Flag: P1IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P1IV_16</name>
                                <description>Interrupt Source: Port 1.7 interrupt; Interrupt Flag: P1IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PASELC</name>
                  <displayName>PASELC</displayName>
                  <description>Port A Complement Select</description>
                  <addressOffset>0x16</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1SELC</name>
                        <description>Port 1 Complement Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2SELC</name>
                        <description>Port 2 Complement Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PAIES</name>
                  <displayName>PAIES</displayName>
                  <description>Port A Interrupt Edge Select</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P1IES</name>
                        <description>Port 1 Interrupt Edge Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2IES</name>
                        <description>Port 2 Interrupt Edge Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PAIE</name>
                  <displayName>PAIE</displayName>
                  <description>Port A Interrupt Enable</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1IE</name>
                        <description>Port 1 Interrupt Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2IE</name>
                        <description>Port 2 Interrupt Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PAIFG</name>
                  <displayName>PAIFG</displayName>
                  <description>Port A Interrupt Flag</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P1IFG</name>
                        <description>Port 1 Interrupt Flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P2IFG</name>
                        <description>Port 2 Interrupt Flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P2IV</name>
                  <displayName>P2IV</displayName>
                  <description>Port 2 Interrupt Vector Register</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>P2IV</name>
                        <description>Port 2 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P2IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P2IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_2</name>
                                <description>Interrupt Source: Port 2.0 interrupt; Interrupt Flag: P2IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_4</name>
                                <description>Interrupt Source: Port 2.1 interrupt; Interrupt Flag: P2IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_6</name>
                                <description>Interrupt Source: Port 2.2 interrupt; Interrupt Flag: P2IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_8</name>
                                <description>Interrupt Source: Port 2.3 interrupt; Interrupt Flag: P2IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_10</name>
                                <description>Interrupt Source: Port 2.4 interrupt; Interrupt Flag: P2IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_12</name>
                                <description>Interrupt Source: Port 2.5 interrupt; Interrupt Flag: P2IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_14</name>
                                <description>Interrupt Source: Port 2.6 interrupt; Interrupt Flag: P2IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P2IV_16</name>
                                <description>Interrupt Source: Port 2.7 interrupt; Interrupt Flag: P2IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBIN</name>
                  <displayName>PBIN</displayName>
                  <description>Port B Input</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P3IN</name>
                        <description>Port 3 Input</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>P4IN</name>
                        <description>Port 4 Input</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBOUT</name>
                  <displayName>PBOUT</displayName>
                  <description>Port B Output</description>
                  <addressOffset>0x22</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P3OUT</name>
                        <description>Port 3 Output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4OUT</name>
                        <description>Port 4 Output</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBDIR</name>
                  <displayName>PBDIR</displayName>
                  <description>Port B Direction</description>
                  <addressOffset>0x24</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P3DIR</name>
                        <description>Port 3 Direction</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4DIR</name>
                        <description>Port 4 Direction</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBREN</name>
                  <displayName>PBREN</displayName>
                  <description>Port B Resistor Enable</description>
                  <addressOffset>0x26</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P3REN</name>
                        <description>Port 3 Resistor Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4REN</name>
                        <description>Port 4 Resistor Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBDS</name>
                  <displayName>PBDS</displayName>
                  <description>Port B Drive Strength</description>
                  <addressOffset>0x28</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>P3DS</name>
                        <description>Port 3 Drive Strength</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4DS</name>
                        <description>Port 4 Drive Strength</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBSEL0</name>
                  <displayName>PBSEL0</displayName>
                  <description>Port B Select 0</description>
                  <addressOffset>0x2A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P4SEL0</name>
                        <description>Port 4 Select 0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P3SEL0</name>
                        <description>Port 3 Select 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBSEL1</name>
                  <displayName>PBSEL1</displayName>
                  <description>Port B Select 1</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P3SEL1</name>
                        <description>Port 3 Select 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4SEL1</name>
                        <description>Port 4 Select 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P3IV</name>
                  <displayName>P3IV</displayName>
                  <description>Port 3 Interrupt Vector Register</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P3IV</name>
                        <description>Port 3 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P3IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P3IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_2</name>
                                <description>Interrupt Source: Port 3.0 interrupt; Interrupt Flag: P3IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_4</name>
                                <description>Interrupt Source: Port 3.1 interrupt; Interrupt Flag: P3IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_6</name>
                                <description>Interrupt Source: Port 3.2 interrupt; Interrupt Flag: P3IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_8</name>
                                <description>Interrupt Source: Port 3.3 interrupt; Interrupt Flag: P3IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_10</name>
                                <description>Interrupt Source: Port 3.4 interrupt; Interrupt Flag: P3IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_12</name>
                                <description>Interrupt Source: Port 3.5 interrupt; Interrupt Flag: P3IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_14</name>
                                <description>Interrupt Source: Port 3.6 interrupt; Interrupt Flag: P3IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P3IV_16</name>
                                <description>Interrupt Source: Port 3.7 interrupt; Interrupt Flag: P3IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBSELC</name>
                  <displayName>PBSELC</displayName>
                  <description>Port B Complement Select</description>
                  <addressOffset>0x36</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P3SELC</name>
                        <description>Port 3 Complement Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4SELC</name>
                        <description>Port 4 Complement Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBIES</name>
                  <displayName>PBIES</displayName>
                  <description>Port B Interrupt Edge Select</description>
                  <addressOffset>0x38</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P3IES</name>
                        <description>Port 3 Interrupt Edge Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4IES</name>
                        <description>Port 4 Interrupt Edge Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBIE</name>
                  <displayName>PBIE</displayName>
                  <description>Port B Interrupt Enable</description>
                  <addressOffset>0x3A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P3IE</name>
                        <description>Port 3 Interrupt Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4IE</name>
                        <description>Port 4 Interrupt Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PBIFG</name>
                  <displayName>PBIFG</displayName>
                  <description>Port B Interrupt Flag</description>
                  <addressOffset>0x3C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P3IFG</name>
                        <description>Port 3 Interrupt Flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P4IFG</name>
                        <description>Port 4 Interrupt Flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P4IV</name>
                  <displayName>P4IV</displayName>
                  <description>Port 4 Interrupt Vector Register</description>
                  <addressOffset>0x3E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>P4IV</name>
                        <description>Port 4 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P4IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P4IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_2</name>
                                <description>Interrupt Source: Port 4.0 interrupt; Interrupt Flag: P4IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_4</name>
                                <description>Interrupt Source: Port 4.1 interrupt; Interrupt Flag: P4IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_6</name>
                                <description>Interrupt Source: Port 4.2 interrupt; Interrupt Flag: P4IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_8</name>
                                <description>Interrupt Source: Port 4.3 interrupt; Interrupt Flag: P4IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_10</name>
                                <description>Interrupt Source: Port 4.4 interrupt; Interrupt Flag: P4IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_12</name>
                                <description>Interrupt Source: Port 4.5 interrupt; Interrupt Flag: P4IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_14</name>
                                <description>Interrupt Source: Port 4.6 interrupt; Interrupt Flag: P4IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P4IV_16</name>
                                <description>Interrupt Source: Port 4.7 interrupt; Interrupt Flag: P4IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCIN</name>
                  <displayName>PCIN</displayName>
                  <description>Port C Input</description>
                  <addressOffset>0x40</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P5IN</name>
                        <description>Port 5 Input</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>P6IN</name>
                        <description>Port 6 Input</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCOUT</name>
                  <displayName>PCOUT</displayName>
                  <description>Port C Output</description>
                  <addressOffset>0x42</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P5OUT</name>
                        <description>Port 5 Output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6OUT</name>
                        <description>Port 6 Output</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCDIR</name>
                  <displayName>PCDIR</displayName>
                  <description>Port C Direction</description>
                  <addressOffset>0x44</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5DIR</name>
                        <description>Port 5 Direction</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6DIR</name>
                        <description>Port 6 Direction</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCREN</name>
                  <displayName>PCREN</displayName>
                  <description>Port C Resistor Enable</description>
                  <addressOffset>0x46</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5REN</name>
                        <description>Port 5 Resistor Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6REN</name>
                        <description>Port 6 Resistor Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCDS</name>
                  <displayName>PCDS</displayName>
                  <description>Port C Drive Strength</description>
                  <addressOffset>0x48</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>P5DS</name>
                        <description>Port 5 Drive Strength</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6DS</name>
                        <description>Port 6 Drive Strength</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCSEL0</name>
                  <displayName>PCSEL0</displayName>
                  <description>Port C Select 0</description>
                  <addressOffset>0x4A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5SEL0</name>
                        <description>Port 5 Select 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6SEL0</name>
                        <description>Port 6 Select 0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCSEL1</name>
                  <displayName>PCSEL1</displayName>
                  <description>Port C Select 1</description>
                  <addressOffset>0x4C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5SEL1</name>
                        <description>Port 5 Select 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6SEL1</name>
                        <description>Port 6 Select 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P5IV</name>
                  <displayName>P5IV</displayName>
                  <description>Port 5 Interrupt Vector Register</description>
                  <addressOffset>0x4E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5IV</name>
                        <description>Port 5 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P5IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P5IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_2</name>
                                <description>Interrupt Source: Port 5.0 interrupt; Interrupt Flag: P5IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_4</name>
                                <description>Interrupt Source: Port 5.1 interrupt; Interrupt Flag: P5IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_6</name>
                                <description>Interrupt Source: Port 5.2 interrupt; Interrupt Flag: P5IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_8</name>
                                <description>Interrupt Source: Port 5.3 interrupt; Interrupt Flag: P5IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_10</name>
                                <description>Interrupt Source: Port 5.4 interrupt; Interrupt Flag: P5IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_12</name>
                                <description>Interrupt Source: Port 5.5 interrupt; Interrupt Flag: P5IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_14</name>
                                <description>Interrupt Source: Port 5.6 interrupt; Interrupt Flag: P5IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P5IV_16</name>
                                <description>Interrupt Source: Port 5.7 interrupt; Interrupt Flag: P5IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCSELC</name>
                  <displayName>PCSELC</displayName>
                  <description>Port C Complement Select</description>
                  <addressOffset>0x56</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5SELC</name>
                        <description>Port 5 Complement Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6SELC</name>
                        <description>Port 6 Complement Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCIES</name>
                  <displayName>PCIES</displayName>
                  <description>Port C Interrupt Edge Select</description>
                  <addressOffset>0x58</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P5IES</name>
                        <description>Port 5 Interrupt Edge Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6IES</name>
                        <description>Port 6 Interrupt Edge Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCIE</name>
                  <displayName>PCIE</displayName>
                  <description>Port C Interrupt Enable</description>
                  <addressOffset>0x5A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5IE</name>
                        <description>Port 5 Interrupt Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6IE</name>
                        <description>Port 6 Interrupt Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCIFG</name>
                  <displayName>PCIFG</displayName>
                  <description>Port C Interrupt Flag</description>
                  <addressOffset>0x5C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P5IFG</name>
                        <description>Port 5 Interrupt Flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P6IFG</name>
                        <description>Port 6 Interrupt Flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P6IV</name>
                  <displayName>P6IV</displayName>
                  <description>Port 6 Interrupt Vector Register</description>
                  <addressOffset>0x5E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>P6IV</name>
                        <description>Port 6 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P6IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P6IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_2</name>
                                <description>Interrupt Source: Port 6.0 interrupt; Interrupt Flag: P6IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_4</name>
                                <description>Interrupt Source: Port 6.1 interrupt; Interrupt Flag: P6IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_6</name>
                                <description>Interrupt Source: Port 6.2 interrupt; Interrupt Flag: P6IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_8</name>
                                <description>Interrupt Source: Port 6.3 interrupt; Interrupt Flag: P6IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_10</name>
                                <description>Interrupt Source: Port 6.4 interrupt; Interrupt Flag: P6IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_12</name>
                                <description>Interrupt Source: Port 6.5 interrupt; Interrupt Flag: P6IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_14</name>
                                <description>Interrupt Source: Port 6.6 interrupt; Interrupt Flag: P6IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P6IV_16</name>
                                <description>Interrupt Source: Port 6.7 interrupt; Interrupt Flag: P6IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDIN</name>
                  <displayName>PDIN</displayName>
                  <description>Port D Input</description>
                  <addressOffset>0x60</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P7IN</name>
                        <description>Port 7 Input</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>P8IN</name>
                        <description>Port 8 Input</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDOUT</name>
                  <displayName>PDOUT</displayName>
                  <description>Port D Output</description>
                  <addressOffset>0x62</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P7OUT</name>
                        <description>Port 7 Output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8OUT</name>
                        <description>Port 8 Output</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDDIR</name>
                  <displayName>PDDIR</displayName>
                  <description>Port D Direction</description>
                  <addressOffset>0x64</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7DIR</name>
                        <description>Port 7 Direction</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8DIR</name>
                        <description>Port 8 Direction</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDREN</name>
                  <displayName>PDREN</displayName>
                  <description>Port D Resistor Enable</description>
                  <addressOffset>0x66</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7REN</name>
                        <description>Port 7 Resistor Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8REN</name>
                        <description>Port 8 Resistor Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDDS</name>
                  <displayName>PDDS</displayName>
                  <description>Port D Drive Strength</description>
                  <addressOffset>0x68</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>P7DS</name>
                        <description>Port 7 Drive Strength</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8DS</name>
                        <description>Port 8 Drive Strength</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDSEL0</name>
                  <displayName>PDSEL0</displayName>
                  <description>Port D Select 0</description>
                  <addressOffset>0x6A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7SEL0</name>
                        <description>Port 7 Select 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8SEL0</name>
                        <description>Port 8 Select 0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDSEL1</name>
                  <displayName>PDSEL1</displayName>
                  <description>Port D Select 1</description>
                  <addressOffset>0x6C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7SEL1</name>
                        <description>Port 7 Select 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8SEL1</name>
                        <description>Port 8 Select 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P7IV</name>
                  <displayName>P7IV</displayName>
                  <description>Port 7 Interrupt Vector Register</description>
                  <addressOffset>0x6E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7IV</name>
                        <description>Port 7 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P7IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P7IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_2</name>
                                <description>Interrupt Source: Port 7.0 interrupt; Interrupt Flag: P7IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_4</name>
                                <description>Interrupt Source: Port 7.1 interrupt; Interrupt Flag: P7IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_6</name>
                                <description>Interrupt Source: Port 7.2 interrupt; Interrupt Flag: P7IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_8</name>
                                <description>Interrupt Source: Port 7.3 interrupt; Interrupt Flag: P7IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_10</name>
                                <description>Interrupt Source: Port 7.4 interrupt; Interrupt Flag: P7IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_12</name>
                                <description>Interrupt Source: Port 7.5 interrupt; Interrupt Flag: P7IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_14</name>
                                <description>Interrupt Source: Port 7.6 interrupt; Interrupt Flag: P7IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P7IV_16</name>
                                <description>Interrupt Source: Port 7.7 interrupt; Interrupt Flag: P7IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDSELC</name>
                  <displayName>PDSELC</displayName>
                  <description>Port D Complement Select</description>
                  <addressOffset>0x76</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7SELC</name>
                        <description>Port 7 Complement Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8SELC</name>
                        <description>Port 8 Complement Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDIES</name>
                  <displayName>PDIES</displayName>
                  <description>Port D Interrupt Edge Select</description>
                  <addressOffset>0x78</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P7IES</name>
                        <description>Port 7 Interrupt Edge Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8IES</name>
                        <description>Port 8 Interrupt Edge Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDIE</name>
                  <displayName>PDIE</displayName>
                  <description>Port D Interrupt Enable</description>
                  <addressOffset>0x7A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7IE</name>
                        <description>Port 7 Interrupt Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8IE</name>
                        <description>Port 8 Interrupt Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PDIFG</name>
                  <displayName>PDIFG</displayName>
                  <description>Port D Interrupt Flag</description>
                  <addressOffset>0x7C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P7IFG</name>
                        <description>Port 7 Interrupt Flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P8IFG</name>
                        <description>Port 8 Interrupt Flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P8IV</name>
                  <displayName>P8IV</displayName>
                  <description>Port 8 Interrupt Vector Register</description>
                  <addressOffset>0x7E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>P8IV</name>
                        <description>Port 8 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P8IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P8IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_2</name>
                                <description>Interrupt Source: Port 8.0 interrupt; Interrupt Flag: P8IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_4</name>
                                <description>Interrupt Source: Port 8.1 interrupt; Interrupt Flag: P8IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_6</name>
                                <description>Interrupt Source: Port 8.2 interrupt; Interrupt Flag: P8IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_8</name>
                                <description>Interrupt Source: Port 8.3 interrupt; Interrupt Flag: P8IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_10</name>
                                <description>Interrupt Source: Port 8.4 interrupt; Interrupt Flag: P8IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_12</name>
                                <description>Interrupt Source: Port 8.5 interrupt; Interrupt Flag: P8IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_14</name>
                                <description>Interrupt Source: Port 8.6 interrupt; Interrupt Flag: P8IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P8IV_16</name>
                                <description>Interrupt Source: Port 8.7 interrupt; Interrupt Flag: P8IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEIN</name>
                  <displayName>PEIN</displayName>
                  <description>Port E Input</description>
                  <addressOffset>0x80</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P9IN</name>
                        <description>Port 9 Input</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>P10IN</name>
                        <description>Port 10 Input</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEOUT</name>
                  <displayName>PEOUT</displayName>
                  <description>Port E Output</description>
                  <addressOffset>0x82</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P9OUT</name>
                        <description>Port 9 Output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10OUT</name>
                        <description>Port 10 Output</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEDIR</name>
                  <displayName>PEDIR</displayName>
                  <description>Port E Direction</description>
                  <addressOffset>0x84</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9DIR</name>
                        <description>Port 9 Direction</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10DIR</name>
                        <description>Port 10 Direction</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEREN</name>
                  <displayName>PEREN</displayName>
                  <description>Port E Resistor Enable</description>
                  <addressOffset>0x86</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9REN</name>
                        <description>Port 9 Resistor Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10REN</name>
                        <description>Port 10 Resistor Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEDS</name>
                  <displayName>PEDS</displayName>
                  <description>Port E Drive Strength</description>
                  <addressOffset>0x88</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>P9DS</name>
                        <description>Port 9 Drive Strength</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10DS</name>
                        <description>Port 10 Drive Strength</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PESEL0</name>
                  <displayName>PESEL0</displayName>
                  <description>Port E Select 0</description>
                  <addressOffset>0x8A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9SEL0</name>
                        <description>Port 9 Select 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10SEL0</name>
                        <description>Port 10 Select 0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PESEL1</name>
                  <displayName>PESEL1</displayName>
                  <description>Port E Select 1</description>
                  <addressOffset>0x8C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9SEL1</name>
                        <description>Port 9 Select 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10SEL1</name>
                        <description>Port 10 Select 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P9IV</name>
                  <displayName>P9IV</displayName>
                  <description>Port 9 Interrupt Vector Register</description>
                  <addressOffset>0x8E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9IV</name>
                        <description>Port 9 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P9IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P9IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_2</name>
                                <description>Interrupt Source: Port 9.0 interrupt; Interrupt Flag: P9IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_4</name>
                                <description>Interrupt Source: Port 9.1 interrupt; Interrupt Flag: P9IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_6</name>
                                <description>Interrupt Source: Port 9.2 interrupt; Interrupt Flag: P9IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_8</name>
                                <description>Interrupt Source: Port 9.3 interrupt; Interrupt Flag: P9IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_10</name>
                                <description>Interrupt Source: Port 9.4 interrupt; Interrupt Flag: P9IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_12</name>
                                <description>Interrupt Source: Port 9.5 interrupt; Interrupt Flag: P9IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_14</name>
                                <description>Interrupt Source: Port 9.6 interrupt; Interrupt Flag: P9IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P9IV_16</name>
                                <description>Interrupt Source: Port 9.7 interrupt; Interrupt Flag: P9IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PESELC</name>
                  <displayName>PESELC</displayName>
                  <description>Port E Complement Select</description>
                  <addressOffset>0x96</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9SELC</name>
                        <description>Port 9 Complement Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10SELC</name>
                        <description>Port 10 Complement Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEIES</name>
                  <displayName>PEIES</displayName>
                  <description>Port E Interrupt Edge Select</description>
                  <addressOffset>0x98</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>P9IES</name>
                        <description>Port 9 Interrupt Edge Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10IES</name>
                        <description>Port 10 Interrupt Edge Select</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEIE</name>
                  <displayName>PEIE</displayName>
                  <description>Port E Interrupt Enable</description>
                  <addressOffset>0x9A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9IE</name>
                        <description>Port 9 Interrupt Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10IE</name>
                        <description>Port 10 Interrupt Enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PEIFG</name>
                  <displayName>PEIFG</displayName>
                  <description>Port E Interrupt Flag</description>
                  <addressOffset>0x9C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>P9IFG</name>
                        <description>Port 9 Interrupt Flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>P10IFG</name>
                        <description>Port 10 Interrupt Flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P10IV</name>
                  <displayName>P10IV</displayName>
                  <description>Port 10 Interrupt Vector Register</description>
                  <addressOffset>0x9E</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>P10IV</name>
                        <description>Port 10 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>P10IV_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>P10IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_2</name>
                                <description>Interrupt Source: Port 10.0 interrupt; Interrupt Flag: P10IFG0; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_4</name>
                                <description>Interrupt Source: Port 10.1 interrupt; Interrupt Flag: P10IFG1</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_6</name>
                                <description>Interrupt Source: Port 10.2 interrupt; Interrupt Flag: P10IFG2</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_8</name>
                                <description>Interrupt Source: Port 10.3 interrupt; Interrupt Flag: P10IFG3</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_10</name>
                                <description>Interrupt Source: Port 10.4 interrupt; Interrupt Flag: P10IFG4</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_12</name>
                                <description>Interrupt Source: Port 10.5 interrupt; Interrupt Flag: P10IFG5</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_14</name>
                                <description>Interrupt Source: Port 10.6 interrupt; Interrupt Flag: P10IFG6</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>P10IV_16</name>
                                <description>Interrupt Source: Port 10.7 interrupt; Interrupt Flag: P10IFG7; Interrupt Priority: Lowest</description>
                                <value>16</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJIN</name>
                  <displayName>PJIN</displayName>
                  <description>Port J Input</description>
                  <addressOffset>0x120</addressOffset>
                  <size>16</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>PJIN</name>
                        <description>Port J Input</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJOUT</name>
                  <displayName>PJOUT</displayName>
                  <description>Port J Output</description>
                  <addressOffset>0x122</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>PJOUT</name>
                        <description>Port J Output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJDIR</name>
                  <displayName>PJDIR</displayName>
                  <description>Port J Direction</description>
                  <addressOffset>0x124</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>PJDIR</name>
                        <description>Port J Direction</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJREN</name>
                  <displayName>PJREN</displayName>
                  <description>Port J Resistor Enable</description>
                  <addressOffset>0x126</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>PJREN</name>
                        <description>Port J Resistor Enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJDS</name>
                  <displayName>PJDS</displayName>
                  <description>Port J Drive Strength</description>
                  <addressOffset>0x128</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PJDS</name>
                        <description>Port J Drive Strength</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJSEL0</name>
                  <displayName>PJSEL0</displayName>
                  <description>Port J Select 0</description>
                  <addressOffset>0x12A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>PJSEL0</name>
                        <description>Port J Select 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJSEL1</name>
                  <displayName>PJSEL1</displayName>
                  <description>Port J Select 1</description>
                  <addressOffset>0x12C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>PJSEL1</name>
                        <description>Port J Select 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PJSELC</name>
                  <displayName>PJSELC</displayName>
                  <description>Port J Complement Select</description>
                  <addressOffset>0x136</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>PJSELC</name>
                        <description>Port J Complement Select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>PMAP</name>
        <version>356.0</version>
        <description>PMAP</description>
        <baseAddress>0x40005000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x40</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>PMAPKEYID</name>
                  <displayName>KEYID</displayName>
                  <description>Port Mapping Key Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x000096a5</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>PMAPKEY</name>
                        <description>Port mapping controller write access key</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PMAPCTL</name>
                  <displayName>CTL</displayName>
                  <description>Port Mapping Control Register</description>
                  <addressOffset>0x2</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000001</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>PMAPLOCKED</name>
                        <description>Port mapping lock bit</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>PMAPLOCKED_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>PMAPLOCKED_0</name>
                                <description>Access to mapping registers is granted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PMAPLOCKED_1</name>
                                <description>Access to mapping registers is locked</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PMAPRECFG</name>
                        <description>Port mapping reconfiguration control bit</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PMAPRECFG_0</name>
                                <description>Configuration allowed only once</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PMAPRECFG_1</name>
                                <description>Allow reconfiguration of port mapping</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P1MAP01</name>
                  <displayName>P1MAP01</displayName>
                  <description>Port mapping register, P1.0 and P1.1</description>
                  <addressOffset>0x8</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P1MAP23</name>
                  <displayName>P1MAP23</displayName>
                  <description>Port mapping register, P1.2 and P1.3</description>
                  <addressOffset>0xA</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P1MAP45</name>
                  <displayName>P1MAP45</displayName>
                  <description>Port mapping register, P1.4 and P1.5</description>
                  <addressOffset>0xC</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P1MAP67</name>
                  <displayName>P1MAP67</displayName>
                  <description>Port mapping register, P1.6 and P1.7</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P2MAP01</name>
                  <displayName>P2MAP01</displayName>
                  <description>Port mapping register, P2.0 and P2.1</description>
                  <addressOffset>0x10</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P2MAP23</name>
                  <displayName>P2MAP23</displayName>
                  <description>Port mapping register, P2.2 and P2.3</description>
                  <addressOffset>0x12</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P2MAP45</name>
                  <displayName>P2MAP45</displayName>
                  <description>Port mapping register, P2.4 and P2.5</description>
                  <addressOffset>0x14</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P2MAP67</name>
                  <displayName>P2MAP67</displayName>
                  <description>Port mapping register, P2.6 and P2.7</description>
                  <addressOffset>0x16</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P3MAP01</name>
                  <displayName>P3MAP01</displayName>
                  <description>Port mapping register, P3.0 and P3.1</description>
                  <addressOffset>0x18</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P3MAP23</name>
                  <displayName>P3MAP23</displayName>
                  <description>Port mapping register, P3.2 and P3.3</description>
                  <addressOffset>0x1A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P3MAP45</name>
                  <displayName>P3MAP45</displayName>
                  <description>Port mapping register, P3.4 and P3.5</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P3MAP67</name>
                  <displayName>P3MAP67</displayName>
                  <description>Port mapping register, P3.6 and P3.7</description>
                  <addressOffset>0x1E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P4MAP01</name>
                  <displayName>P4MAP01</displayName>
                  <description>Port mapping register, P4.0 and P4.1</description>
                  <addressOffset>0x20</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P4MAP23</name>
                  <displayName>P4MAP23</displayName>
                  <description>Port mapping register, P4.2 and P4.3</description>
                  <addressOffset>0x22</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P4MAP45</name>
                  <displayName>P4MAP45</displayName>
                  <description>Port mapping register, P4.4 and P4.5</description>
                  <addressOffset>0x24</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P4MAP67</name>
                  <displayName>P4MAP67</displayName>
                  <description>Port mapping register, P4.6 and P4.7</description>
                  <addressOffset>0x26</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P5MAP01</name>
                  <displayName>P5MAP01</displayName>
                  <description>Port mapping register, P5.0 and P5.1</description>
                  <addressOffset>0x28</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P5MAP23</name>
                  <displayName>P5MAP23</displayName>
                  <description>Port mapping register, P5.2 and P5.3</description>
                  <addressOffset>0x2A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P5MAP45</name>
                  <displayName>P5MAP45</displayName>
                  <description>Port mapping register, P5.4 and P5.5</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P5MAP67</name>
                  <displayName>P5MAP67</displayName>
                  <description>Port mapping register, P5.6 and P5.7</description>
                  <addressOffset>0x2E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P6MAP01</name>
                  <displayName>P6MAP01</displayName>
                  <description>Port mapping register, P6.0 and P6.1</description>
                  <addressOffset>0x30</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P6MAP23</name>
                  <displayName>P6MAP23</displayName>
                  <description>Port mapping register, P6.2 and P6.3</description>
                  <addressOffset>0x32</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P6MAP45</name>
                  <displayName>P6MAP45</displayName>
                  <description>Port mapping register, P6.4 and P6.5</description>
                  <addressOffset>0x34</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P6MAP67</name>
                  <displayName>P6MAP67</displayName>
                  <description>Port mapping register, P6.6 and P6.7</description>
                  <addressOffset>0x36</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P7MAP01</name>
                  <displayName>P7MAP01</displayName>
                  <description>Port mapping register, P7.0 and P7.1</description>
                  <addressOffset>0x38</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P7MAP23</name>
                  <displayName>P7MAP23</displayName>
                  <description>Port mapping register, P7.2 and P7.3</description>
                  <addressOffset>0x3A</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P7MAP45</name>
                  <displayName>P7MAP45</displayName>
                  <description>Port mapping register, P7.4 and P7.5</description>
                  <addressOffset>0x3C</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>P7MAP67</name>
                  <displayName>P7MAP67</displayName>
                  <description>Port mapping register, P7.6 and P7.7</description>
                  <addressOffset>0x3E</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>PMAPx</name>
                        <description>Selects secondary port function</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>CAPTIO0</name>
        <version>356.0</version>
        <description>CAPTIO0</description>
        <baseAddress>0x40005400</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x10</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>CAPTIOxCTL</name>
                  <displayName>CTL</displayName>
                  <description>Capacitive Touch IO x Control Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CAPTIOPISELx</name>
                        <description>Capacitive Touch IO pin select</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_0</name>
                                <description>Px.0</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_1</name>
                                <description>Px.1</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_2</name>
                                <description>Px.2</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_3</name>
                                <description>Px.3</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_4</name>
                                <description>Px.4</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_5</name>
                                <description>Px.5</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_6</name>
                                <description>Px.6</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_7</name>
                                <description>Px.7</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAPTIOPOSELx</name>
                        <description>Capacitive Touch IO port select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_0</name>
                                <description>Px = PJ</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_1</name>
                                <description>Px = P1</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_2</name>
                                <description>Px = P2</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_3</name>
                                <description>Px = P3</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_4</name>
                                <description>Px = P4</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_5</name>
                                <description>Px = P5</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_6</name>
                                <description>Px = P6</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_7</name>
                                <description>Px = P7</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_8</name>
                                <description>Px = P8</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_9</name>
                                <description>Px = P9</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_10</name>
                                <description>Px = P10</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_11</name>
                                <description>Px = P11</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_12</name>
                                <description>Px = P12</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_13</name>
                                <description>Px = P13</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_14</name>
                                <description>Px = P14</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_15</name>
                                <description>Px = P15</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAPTIOEN</name>
                        <description>Capacitive Touch IO enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAPTIOEN_0</name>
                                <description>All Capacitive Touch IOs are disabled. Signal towards timers is 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOEN_1</name>
                                <description>Selected Capacitive Touch IO is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAPTIOSTATE</name>
                        <description>Capacitive Touch IO state</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CAPTIOSTATE_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>CAPTIOSTATE_0</name>
                                <description>Curent state 0 or Capacitive Touch IO is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOSTATE_1</name>
                                <description>Current state 1</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>CAPTIO1</name>
        <version>356.0</version>
        <description>CAPTIO1</description>
        <baseAddress>0x40005800</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x10</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>CAPTIOxCTL</name>
                  <displayName>CTL</displayName>
                  <description>Capacitive Touch IO x Control Register</description>
                  <addressOffset>0xE</addressOffset>
                  <size>16</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0000ffff</resetMask>
                  <fields>
                    <field>
                        <name>CAPTIOPISELx</name>
                        <description>Capacitive Touch IO pin select</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_0</name>
                                <description>Px.0</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_1</name>
                                <description>Px.1</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_2</name>
                                <description>Px.2</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_3</name>
                                <description>Px.3</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_4</name>
                                <description>Px.4</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_5</name>
                                <description>Px.5</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_6</name>
                                <description>Px.6</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPISELx_7</name>
                                <description>Px.7</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAPTIOPOSELx</name>
                        <description>Capacitive Touch IO port select</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_0</name>
                                <description>Px = PJ</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_1</name>
                                <description>Px = P1</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_2</name>
                                <description>Px = P2</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_3</name>
                                <description>Px = P3</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_4</name>
                                <description>Px = P4</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_5</name>
                                <description>Px = P5</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_6</name>
                                <description>Px = P6</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_7</name>
                                <description>Px = P7</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_8</name>
                                <description>Px = P8</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_9</name>
                                <description>Px = P9</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_10</name>
                                <description>Px = P10</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_11</name>
                                <description>Px = P11</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_12</name>
                                <description>Px = P12</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_13</name>
                                <description>Px = P13</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_14</name>
                                <description>Px = P14</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOPOSELx_15</name>
                                <description>Px = P15</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAPTIOEN</name>
                        <description>Capacitive Touch IO enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CAPTIOEN_0</name>
                                <description>All Capacitive Touch IOs are disabled. Signal towards timers is 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOEN_1</name>
                                <description>Selected Capacitive Touch IO is enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CAPTIOSTATE</name>
                        <description>Capacitive Touch IO state</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CAPTIOSTATE_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>CAPTIOSTATE_0</name>
                                <description>Curent state 0 or Capacitive Touch IO is disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CAPTIOSTATE_1</name>
                                <description>Current state 1</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>TIMER32</name>
        <version>356.0</version>
        <description>TIMER32</description>
        <baseAddress>0x4000C000</baseAddress>
        <interrupt>
            <name>T32_INT1_IRQ</name>
            <description>T32_INT1 Interrupt</description>
            <value>25</value>
        </interrupt>
        <interrupt>
            <name>T32_INT2_IRQ</name>
            <description>T32_INT2 Interrupt</description>
            <value>26</value>
        </interrupt>
        <interrupt>
            <name>T32_INTC_IRQ</name>
            <description>T32_INTC Interrupt</description>
            <value>27</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0xF0C</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>T32LOAD1</name>
                  <displayName>LOAD1</displayName>
                  <description>Timer 1 Load Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LOAD</name>
                        <description>The value from which the Timer 1 counter decrements</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32VALUE1</name>
                  <displayName>VALUE1</displayName>
                  <description>Timer 1 Current Value Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>VALUE</name>
                        <description>Current value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32CONTROL1</name>
                  <displayName>CONTROL1</displayName>
                  <description>Timer 1 Timer Control Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000020</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ONESHOT</name>
                        <description>Selects one-shot or wrapping counter mode</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ONESHOT_0</name>
                                <description>wrapping mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ONESHOT_1</name>
                                <description>one-shot mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SIZE</name>
                        <description>Selects 16 or 32 bit counter operation</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SIZE_0</name>
                                <description>16-bit counter</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SIZE_1</name>
                                <description>32-bit counter</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PRESCALE</name>
                        <description>Prescale bits</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PRESCALE_0</name>
                                <description>0 stages of prescale, clock is divided by 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PRESCALE_1</name>
                                <description>4 stages of prescale, clock is divided by 16</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PRESCALE_2</name>
                                <description>8 stages of prescale, clock is divided by 256</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>IE</name>
                        <description>Interrupt enable bit</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>IE_0</name>
                                <description>Timer interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>IE_1</name>
                                <description>Timer interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MODE</name>
                        <description>Mode bit</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MODE_0</name>
                                <description>Timer is in free-running mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MODE_1</name>
                                <description>Timer is in periodic mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ENABLE</name>
                        <description>Enable bit</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ENABLE_0</name>
                                <description>Timer disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ENABLE_1</name>
                                <description>Timer enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32INTCLR1</name>
                  <displayName>INTCLR1</displayName>
                  <description>Timer 1 Interrupt Clear Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>INTCLR</name>
                        <description>Write clears interrupt output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32RIS1</name>
                  <displayName>RIS1</displayName>
                  <description>Timer 1 Raw Interrupt Status Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RAW_IFG</name>
                        <description>Raw interrupt status</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32MIS1</name>
                  <displayName>MIS1</displayName>
                  <description>Timer 1 Interrupt Status Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>IFG</name>
                        <description>Enabled interrupt status</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32BGLOAD1</name>
                  <displayName>BGLOAD1</displayName>
                  <description>Timer 1 Background Load Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>BGLOAD</name>
                        <description>Value from which the counter decrements</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32LOAD2</name>
                  <displayName>LOAD2</displayName>
                  <description>Timer 2 Load Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LOAD</name>
                        <description>The value from which the Timer 2 counter decrements</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32VALUE2</name>
                  <displayName>VALUE2</displayName>
                  <description>Timer 2 Current Value Register</description>
                  <addressOffset>0x24</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>VALUE</name>
                        <description>Current value of the decrementing counter</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32CONTROL2</name>
                  <displayName>CONTROL2</displayName>
                  <description>Timer 2 Timer Control Register</description>
                  <addressOffset>0x28</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000020</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ONESHOT</name>
                        <description>Selects one-shot or wrapping counter mode</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ONESHOT_0</name>
                                <description>wrapping mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ONESHOT_1</name>
                                <description>one-shot mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SIZE</name>
                        <description>Selects 16 or 32 bit counter operation</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SIZE_0</name>
                                <description>16-bit counter</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SIZE_1</name>
                                <description>32-bit counter</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PRESCALE</name>
                        <description>Prescale bits</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PRESCALE_0</name>
                                <description>0 stages of prescale, clock is divided by 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PRESCALE_1</name>
                                <description>4 stages of prescale, clock is divided by 16</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PRESCALE_2</name>
                                <description>8 stages of prescale, clock is divided by 256</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>IE</name>
                        <description>Interrupt enable bit</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>IE_0</name>
                                <description>Timer interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>IE_1</name>
                                <description>Timer interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MODE</name>
                        <description>Mode bit</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MODE_0</name>
                                <description>Timer is in free-running mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MODE_1</name>
                                <description>Timer is in periodic mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ENABLE</name>
                        <description>Enable bit</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ENABLE_0</name>
                                <description>Timer disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ENABLE_1</name>
                                <description>Timer enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32INTCLR2</name>
                  <displayName>INTCLR2</displayName>
                  <description>Timer 2 Interrupt Clear Register</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>INTCLR</name>
                        <description>Write clears the interrupt output</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32RIS2</name>
                  <displayName>RIS2</displayName>
                  <description>Timer 2 Raw Interrupt Status Register</description>
                  <addressOffset>0x30</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RAW_IFG</name>
                        <description>Raw interrupt status</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32MIS2</name>
                  <displayName>MIS2</displayName>
                  <description>Timer 2 Interrupt Status Register</description>
                  <addressOffset>0x34</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>IFG</name>
                        <description>Enabled interrupt status</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>T32BGLOAD2</name>
                  <displayName>BGLOAD2</displayName>
                  <description>Timer 2 Background Load Register</description>
                  <addressOffset>0x38</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>BGLOAD</name>
                        <description>Value from which the counter decrements</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>DMA</name>
        <version>356.0</version>
        <description>DMA</description>
        <baseAddress>0x4000E000</baseAddress>
        <interrupt>
            <name>DMA_ERR_IRQ</name>
            <description>DMA_ERR Interrupt</description>
            <value>30</value>
        </interrupt>
        <interrupt>
            <name>DMA_INT3_IRQ</name>
            <description>DMA_INT3 Interrupt</description>
            <value>31</value>
        </interrupt>
        <interrupt>
            <name>DMA_INT2_IRQ</name>
            <description>DMA_INT2 Interrupt</description>
            <value>32</value>
        </interrupt>
        <interrupt>
            <name>DMA_INT1_IRQ</name>
            <description>DMA_INT1 Interrupt</description>
            <value>33</value>
        </interrupt>
        <interrupt>
            <name>DMA_INT0_IRQ</name>
            <description>DMA_INT0 Interrupt</description>
            <value>34</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1050</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>DMA_DEVICE_CFG</name>
                  <displayName>DEVICE_CFG</displayName>
                  <description>Device Configuration Status</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffff0000</resetMask>
                  <fields>
                    <field>
                        <name>NUM_DMA_CHANNELS</name>
                        <description>Number of DMA channels available</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>NUM_SRC_PER_CHANNEL</name>
                        <description>Number of DMA sources per channel</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_SW_CHTRIG</name>
                  <displayName>SW_CHTRIG</displayName>
                  <description>Software Channel Trigger Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CH0</name>
                        <description>Write 1, triggers DMA_CHANNEL0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH1</name>
                        <description>Write 1, triggers DMA_CHANNEL1</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH2</name>
                        <description>Write 1, triggers DMA_CHANNEL2</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH3</name>
                        <description>Write 1, triggers DMA_CHANNEL3</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH4</name>
                        <description>Write 1, triggers DMA_CHANNEL4</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH5</name>
                        <description>Write 1, triggers DMA_CHANNEL5</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH6</name>
                        <description>Write 1, triggers DMA_CHANNEL6</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH7</name>
                        <description>Write 1, triggers DMA_CHANNEL7</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH8</name>
                        <description>Write 1, triggers DMA_CHANNEL8</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH9</name>
                        <description>Write 1, triggers DMA_CHANNEL9</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH10</name>
                        <description>Write 1, triggers DMA_CHANNEL10</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH11</name>
                        <description>Write 1, triggers DMA_CHANNEL11</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH12</name>
                        <description>Write 1, triggers DMA_CHANNEL12</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH13</name>
                        <description>Write 1, triggers DMA_CHANNEL13</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH14</name>
                        <description>Write 1, triggers DMA_CHANNEL14</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH15</name>
                        <description>Write 1, triggers DMA_CHANNEL15</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH16</name>
                        <description>Write 1, triggers DMA_CHANNEL16</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH17</name>
                        <description>Write 1, triggers DMA_CHANNEL17</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH18</name>
                        <description>Write 1, triggers DMA_CHANNEL18</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH19</name>
                        <description>Write 1, triggers DMA_CHANNEL19</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH20</name>
                        <description>Write 1, triggers DMA_CHANNEL20</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH21</name>
                        <description>Write 1, triggers DMA_CHANNEL21</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH22</name>
                        <description>Write 1, triggers DMA_CHANNEL22</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH23</name>
                        <description>Write 1, triggers DMA_CHANNEL23</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH24</name>
                        <description>Write 1, triggers DMA_CHANNEL24</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH25</name>
                        <description>Write 1, triggers DMA_CHANNEL25</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH26</name>
                        <description>Write 1, triggers DMA_CHANNEL26</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH27</name>
                        <description>Write 1, triggers DMA_CHANNEL27</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH28</name>
                        <description>Write 1, triggers DMA_CHANNEL28</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH29</name>
                        <description>Write 1, triggers DMA_CHANNEL29</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH30</name>
                        <description>Write 1, triggers DMA_CHANNEL30</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CH31</name>
                        <description>Write 1, triggers DMA_CHANNEL31</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>32</dim>
                  <dimIncrement>4</dimIncrement>
                  <dimIndex>0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31</dimIndex>
                  <name>DMA_CH_SRCCFG[%s]</name>
                  <displayName>CH_SRCCFG[%s]</displayName>
                  <description>Channel n Source Configuration Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DMA_SRC</name>
                        <description>Device level DMA source mapping to channel input</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_INT1_SRCCFG</name>
                  <displayName>INT1_SRCCFG</displayName>
                  <description>Interrupt 1 Source Channel Configuration</description>
                  <addressOffset>0x100</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>INT_SRC</name>
                        <description>Controls which channel's completion event is mapped as a source of this Interrupt</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>EN</name>
                        <description>Enables DMA_INT1 mapping</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_INT2_SRCCFG</name>
                  <displayName>INT2_SRCCFG</displayName>
                  <description>Interrupt 2 Source Channel Configuration Register</description>
                  <addressOffset>0x104</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>INT_SRC</name>
                        <description>Controls which channel's completion event is mapped as a source of this Interrupt</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>EN</name>
                        <description>Enables DMA_INT2 mapping</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_INT3_SRCCFG</name>
                  <displayName>INT3_SRCCFG</displayName>
                  <description>Interrupt 3 Source Channel Configuration Register</description>
                  <addressOffset>0x108</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>INT_SRC</name>
                        <description>Controls which channel's completion event is mapped as a source of this Interrupt</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>EN</name>
                        <description>Enables DMA_INT3 mapping</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_INT0_SRCFLG</name>
                  <displayName>INT0_SRCFLG</displayName>
                  <description>Interrupt 0 Source Channel Flag Register</description>
                  <addressOffset>0x110</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CH0</name>
                        <description>Channel 0 was the source of DMA_INT0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH1</name>
                        <description>Channel 1 was the source of DMA_INT0</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH2</name>
                        <description>Channel 2 was the source of DMA_INT0</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH3</name>
                        <description>Channel 3 was the source of DMA_INT0</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH4</name>
                        <description>Channel 4 was the source of DMA_INT0</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH5</name>
                        <description>Channel 5 was the source of DMA_INT0</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH6</name>
                        <description>Channel 6 was the source of DMA_INT0</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH7</name>
                        <description>Channel 7 was the source of DMA_INT0</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH8</name>
                        <description>Channel 8 was the source of DMA_INT0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH9</name>
                        <description>Channel 9 was the source of DMA_INT0</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH10</name>
                        <description>Channel 10 was the source of DMA_INT0</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH11</name>
                        <description>Channel 11 was the source of DMA_INT0</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH12</name>
                        <description>Channel 12 was the source of DMA_INT0</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH13</name>
                        <description>Channel 13 was the source of DMA_INT0</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH14</name>
                        <description>Channel 14 was the source of DMA_INT0</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH15</name>
                        <description>Channel 15 was the source of DMA_INT0</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH16</name>
                        <description>Channel 16 was the source of DMA_INT0</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH17</name>
                        <description>Channel 17 was the source of DMA_INT0</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH18</name>
                        <description>Channel 18 was the source of DMA_INT0</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH19</name>
                        <description>Channel 19 was the source of DMA_INT0</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH20</name>
                        <description>Channel 20 was the source of DMA_INT0</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH21</name>
                        <description>Channel 21 was the source of DMA_INT0</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH22</name>
                        <description>Channel 22 was the source of DMA_INT0</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH23</name>
                        <description>Channel 23 was the source of DMA_INT0</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH24</name>
                        <description>Channel 24 was the source of DMA_INT0</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH25</name>
                        <description>Channel 25 was the source of DMA_INT0</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH26</name>
                        <description>Channel 26 was the source of DMA_INT0</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH27</name>
                        <description>Channel 27 was the source of DMA_INT0</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH28</name>
                        <description>Channel 28 was the source of DMA_INT0</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH29</name>
                        <description>Channel 29 was the source of DMA_INT0</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH30</name>
                        <description>Channel 30 was the source of DMA_INT0</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CH31</name>
                        <description>Channel 31 was the source of DMA_INT0</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_INT0_CLRFLG</name>
                  <displayName>INT0_CLRFLG</displayName>
                  <description>Interrupt 0 Source Channel Clear Flag Register</description>
                  <addressOffset>0x114</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>CH0</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH1</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH2</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH3</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH4</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH5</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH6</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH7</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH8</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH9</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH10</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH11</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH12</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH13</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH14</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH15</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH16</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH17</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH18</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH19</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH20</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH21</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH22</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH23</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH24</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH25</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH26</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH27</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH28</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH29</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH30</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CH31</name>
                        <description>Clear corresponding DMA_INT0_SRCFLG_REG</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_STAT</name>
                  <displayName>STAT</displayName>
                  <description>Status Register</description>
                  <addressOffset>0x1000</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x0f00ffff</resetMask>
                  <fields>
                    <field>
                        <name>MASTEN</name>
                        <description>Enable status of the controller</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>MASTEN_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>MASTEN_0</name>
                                <description>Controller disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MASTEN_1</name>
                                <description>Controller enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>STATE</name>
                        <description>Current state of the control state machine.
State can be one of the following:</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>STATE_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>STATE_0</name>
                                <description>idle</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_1</name>
                                <description>reading channel controller data</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_2</name>
                                <description>reading source data end pointer</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_3</name>
                                <description>reading destination data end pointer</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_4</name>
                                <description>reading source data</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_5</name>
                                <description>writing destination data</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_6</name>
                                <description>waiting for DMA request to clear</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_7</name>
                                <description>writing channel controller data</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_8</name>
                                <description>stalled</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_9</name>
                                <description>done</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATE_10</name>
                                <description>peripheral scatter-gather transition</description>
                                <value>10</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DMACHANS</name>
                        <description>Number of available DMA channels minus one.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>DMACHANS_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>DMACHANS_0</name>
                                <description>Controller configured to use 1 DMA channel</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DMACHANS_1</name>
                                <description>Controller configured to use 2 DMA channels</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DMACHANS_30</name>
                                <description>Controller configured to use 31 DMA channels</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DMACHANS_31</name>
                                <description>Controller configured to use 32 DMA channels</description>
                                <value>31</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TESTSTAT</name>
                        <description>To reduce the gate count the controller can be configured to exclude the integration test logic.
The values 2h to Fh are Reserved.</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>TESTSTAT_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>TESTSTAT_0</name>
                                <description>Controller does not include the integration test logic</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TESTSTAT_1</name>
                                <description>Controller includes the integration test logic</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_CFG</name>
                  <displayName>CFG</displayName>
                  <description>Configuration Register</description>
                  <addressOffset>0x1004</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>MASTEN</name>
                        <description>Enable status of the controller</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>MASTEN_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>MASTEN_0</name>
                                <description>Controller disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MASTEN_1</name>
                                <description>Controller enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CHPROTCTRL</name>
                        <description>Sets the AHB-Lite protection by controlling the HPROT[3:1] signal
levels as follows:
Bit [7] Controls HPROT[3] to indicate if a cacheable access is occurring.
Bit [6] Controls HPROT[2] to indicate if a bufferable access is occurring.
Bit [5] Controls HPROT[1] to indicate if a privileged access is occurring.
Note: When bit [n] = 1 then the corresponding HPROT is HIGH.
When bit [n] = 0 then the corresponding HPROT is LOW.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_CTLBASE</name>
                  <displayName>CTLBASE</displayName>
                  <description>Channel Control Data Base Pointer Register</description>
                  <addressOffset>0x1008</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADDR</name>
                        <description>Pointer to the base address of the primary data structure.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_ALTBASE</name>
                  <displayName>ALTBASE</displayName>
                  <description>Channel Alternate Control Data Base Pointer Register</description>
                  <addressOffset>0x100C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffff00</resetMask>
                  <fields>
                    <field>
                        <name>ADDR</name>
                        <description>Base address of the alternate data structure</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_WAITSTAT</name>
                  <displayName>WAITSTAT</displayName>
                  <description>Channel Wait on Request Status Register</description>
                  <addressOffset>0x1010</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>WAITREQ</name>
                        <description>Channel wait on request status.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>WAITREQ_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>WAITREQ_0</name>
                                <description>dma_waitonreq[C] is LOW.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAITREQ_1</name>
                                <description>dma_waitonreq[C] is HIGH.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_SWREQ</name>
                  <displayName>SWREQ</displayName>
                  <description>Channel Software Request Register</description>
                  <addressOffset>0x1014</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>CHNL_SW_REQ</name>
                        <description>Set the appropriate bit to generate a software DMA request on the
corresponding DMA channel.
Writing to a bit where a DMA channel is not implemented does not
create a DMA request for that channel.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CHNL_SW_REQ_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CHNL_SW_REQ_0</name>
                                <description>Does not create a DMA request for the channel</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CHNL_SW_REQ_1</name>
                                <description>Creates a DMA request for the channel</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_USEBURSTSET</name>
                  <displayName>USEBURSTSET</displayName>
                  <description>Channel Useburst Set Register</description>
                  <addressOffset>0x1018</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SET</name>
                        <description>Returns the useburst status, or disables dma_sreq from generating DMA requests.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <name>SET_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SET_0_READ</name>
                                <description>DMA channel C responds to requests that it receives on dma_req[C] or dma_sreq[C].
The controller performs 2R, or single, bus transfers.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_READ</name>
                                <description>DMA channel C does not respond to requests that it receives on dma_sreq[C].
The controller only responds to dma_req[C] requests and performs 2R transfers.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                        <enumeratedValues>
                            <name>SET_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_0_WRITE</name>
                                <description>No effect. Use the DMA_USEBURST_CLR Register to set bit [C] to 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_WRITE</name>
                                <description>Disables dma_sreq[C] from generating DMA requests.
The controller performs 2R transfers.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_USEBURSTCLR</name>
                  <displayName>USEBURSTCLR</displayName>
                  <description>Channel Useburst Clear Register</description>
                  <addressOffset>0x101C</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Set the appropriate bit to enable dma_sreq to generate requests.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_0</name>
                                <description>No effect.
Use the DMA_USEBURST_SET Register to disable dma_sreq from generating requests.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_1</name>
                                <description>Enables dma_sreq[C] to generate DMA requests.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_REQMASKSET</name>
                  <displayName>REQMASKSET</displayName>
                  <description>Channel Request Mask Set Register</description>
                  <addressOffset>0x1020</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SET</name>
                        <description>Returns the request mask status of dma_req and dma_sreq, or
disables the corresponding channel from generating DMA requests.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <name>SET_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SET_0_READ</name>
                                <description>External requests are enabled for channel C.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_READ</name>
                                <description>External requests are disabled for channel C.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                        <enumeratedValues>
                            <name>SET_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_0_WRITE</name>
                                <description>No effect.
Use the DMA_REQMASKCLR Register to enable DMA requests.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_WRITE</name>
                                <description>Disables dma_req[C] and dma_sreq[C] from generating DMA requests.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_REQMASKCLR</name>
                  <displayName>REQMASKCLR</displayName>
                  <description>Channel Request Mask Clear Register</description>
                  <addressOffset>0x1024</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Set the appropriate bit to enable DMA requests for the channel
corresponding to dma_req and dma_sreq.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_0</name>
                                <description>No effect.
Use the DMA_REQMASKSET Register to disable dma_req and
dma_sreq from generating requests.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_1</name>
                                <description>Enables dma_req[C] or dma_sreq[C] to generate DMA requests.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_ENASET</name>
                  <displayName>ENASET</displayName>
                  <description>Channel Enable Set Register</description>
                  <addressOffset>0x1028</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SET</name>
                        <description>Returns the enable status of the channels, or enables the
corresponding channels.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <name>SET_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SET_0_READ</name>
                                <description>Channel C is disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_READ</name>
                                <description>Channel C is enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                        <enumeratedValues>
                            <name>SET_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_0_WRITE</name>
                                <description>No effect.
Use the DMA_ENACLR Register to disable a channel.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_WRITE</name>
                                <description>Enables channel C.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_ENACLR</name>
                  <displayName>ENACLR</displayName>
                  <description>Channel Enable Clear Register</description>
                  <addressOffset>0x102C</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Set the appropriate bit to disable the corresponding DMA channel.
Note: The controller disables a channel, by setting the appropriate
bit, when:
a) it completes the DMA cycle
b) it reads a channel_cfg memory location which has cycle_ctrl =
b000
c) an ERROR occurs on the AHB-Lite bus.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_0</name>
                                <description>No effect.
Use the DMA_ENASET Register to enable DMA channels.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_1</name>
                                <description>Disables channel C.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_ALTSET</name>
                  <displayName>ALTSET</displayName>
                  <description>Channel Primary-Alternate Set Register</description>
                  <addressOffset>0x1030</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SET</name>
                        <description>Channel Primary-Alternate Set Register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <name>SET_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SET_0_READ</name>
                                <description>DMA channel C is using the primary data structure.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_READ</name>
                                <description>DMA channel C is using the alternate data structure.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                        <enumeratedValues>
                            <name>SET_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SEL_0_WRITE</name>
                                <description>No effect.
Use the DMA_ALTCLR Register to set bit [C] to 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SEL_1_WRITE</name>
                                <description>Selects the alternate data structure for channel C.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_ALTCLR</name>
                  <displayName>ALTCLR</displayName>
                  <description>Channel Primary-Alternate Clear Register</description>
                  <addressOffset>0x1034</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Channel Primary-Alternate Clear Register</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_0</name>
                                <description>No effect.
Use the DMA_ALTSET Register to select the alternate data structure.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_1</name>
                                <description>Selects the primary data structure for channel C.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_PRIOSET</name>
                  <displayName>PRIOSET</displayName>
                  <description>Channel Priority Set Register</description>
                  <addressOffset>0x1038</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SET</name>
                        <description>Returns the channel priority mask status, or sets the channel priority
to high.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <name>SET_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SET_0_READ</name>
                                <description>DMA channel C is using the default priority level.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_READ</name>
                                <description>DMA channel C is using a high priority level.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                        <enumeratedValues>
                            <name>SET_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_0_WRITE</name>
                                <description>No effect.
Use the DMA_PRIOCLR Register to set channel C to the default priority level.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_1_WRITE</name>
                                <description>Channel C uses the high priority level.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_PRIOCLR</name>
                  <displayName>PRIOCLR</displayName>
                  <description>Channel Priority Clear Register</description>
                  <addressOffset>0x103C</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Set the appropriate bit to select the default priority level for the
specified DMA channel.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_0</name>
                                <description>No effect.
Use the DMA_PRIOSET Register to set channel C to the high priority level.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_1</name>
                                <description>Channel C uses the default priority level.
Writing to a bit where a DMA channel is not implemented has no effect.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DMA_ERRCLR</name>
                  <displayName>ERRCLR</displayName>
                  <description>Bus Error Clear Register</description>
                  <addressOffset>0x104C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ERRCLR</name>
                        <description>Returns the status of dma_err, or sets the signal LOW.

For test purposes, use the ERRSET register to set dma_err HIGH.
Note: If you deassert dma_err at the same time as an ERROR
occurs on the AHB-Lite bus, then the ERROR condition takes
precedence and dma_err remains asserted.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <name>ERRCLR_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ERRCLR_0_READ</name>
                                <description>dma_err is LOW</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ERRCLR_1_READ</name>
                                <description>dma_err is HIGH.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                        <enumeratedValues>
                            <name>ERRCLR_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>ERRCLR_0_WRITE</name>
                                <description>No effect, status of dma_err is unchanged.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ERRCLR_1_WRITE</name>
                                <description>Sets dma_err LOW.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>PCM</name>
        <version>356.0</version>
        <description>PCM</description>
        <baseAddress>0x40010000</baseAddress>
        <interrupt>
            <name>PCM_IRQ</name>
            <description>PCM Interrupt</description>
            <value>2</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x14</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>PCMCTL0</name>
                  <displayName>CTL0</displayName>
                  <description>Control 0 Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0xa5960000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>AMR</name>
                        <description>Active Mode Request</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AMR_0</name>
                                <description>LDO based Active Mode at Core voltage setting 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AMR_1</name>
                                <description>LDO based Active Mode at Core voltage setting 1.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AMR_4</name>
                                <description>DC-DC based Active Mode at Core voltage setting 0.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AMR_5</name>
                                <description>DC-DC based Active Mode at Core voltage setting 1.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AMR_8</name>
                                <description>Low-Frequency Active Mode at Core voltage setting 0.</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AMR_9</name>
                                <description>Low-Frequency Active Mode at Core voltage setting 1.</description>
                                <value>9</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LPMR</name>
                        <description>Low Power Mode Request</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LPMR_0</name>
                                <description>LPM3. Core voltage setting is similar to the mode from which LPM3 is entered.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LPMR_10</name>
                                <description>LPM3.5. Core voltage setting 0.</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LPMR_12</name>
                                <description>LPM4.5</description>
                                <value>12</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CPM</name>
                        <description>Current Power Mode</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CPM_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>CPM_0</name>
                                <description>LDO based Active Mode at Core voltage setting 0.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_1</name>
                                <description>LDO based Active Mode at Core voltage setting 1.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_4</name>
                                <description>DC-DC based Active Mode at Core voltage setting 0.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_5</name>
                                <description>DC-DC based Active Mode at Core voltage setting 1.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_8</name>
                                <description>Low-Frequency Active Mode at Core voltage setting 0.</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_9</name>
                                <description>Low-Frequency Active Mode at Core voltage setting 1.</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_16</name>
                                <description>LDO based LPM0 at Core voltage setting 0.</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_17</name>
                                <description>LDO based LPM0 at Core voltage setting 1.</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_20</name>
                                <description>DC-DC based LPM0 at Core voltage setting 0.</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_21</name>
                                <description>DC-DC based LPM0 at Core voltage setting 1.</description>
                                <value>21</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_24</name>
                                <description>Low-Frequency LPM0 at Core voltage setting 0.</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_25</name>
                                <description>Low-Frequency LPM0 at Core voltage setting 1.</description>
                                <value>25</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CPM_32</name>
                                <description>LPM3</description>
                                <value>32</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PCMKEY</name>
                        <description>PCM key</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCMCTL1</name>
                  <displayName>CTL1</displayName>
                  <description>Control 1 Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0xa5960000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LOCKLPM5</name>
                        <description>Lock LPM5</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LOCKLPM5_0</name>
                                <description>LPMx.5 configuration defaults to reset condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LOCKLPM5_1</name>
                                <description>LPMx.5 configuration remains locked during LPMx.5 entry and exit</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LOCKBKUP</name>
                        <description>Lock Backup</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LOCKBKUP_0</name>
                                <description>Backup domain configuration defaults to reset condition</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LOCKBKUP_1</name>
                                <description>Backup domain configuration remains locked during LPM3.5 entry and exit</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FORCE_LPM_ENTRY</name>
                        <description>Force LPM entry</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FORCE_LPM_ENTRY_0</name>
                                <description>PCM aborts LPM3/LPMx.5 transition if the active clock configuration does not meet the LPM3/LPMx.5 entry criteria. PCM generates the LPM_INVALID_CLK flag on abort to LPM3/LPMx.5 entry.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FORCE_LPM_ENTRY_1</name>
                                <description>PCM enters LPM3/LPMx.5 after shuting off the clocks forcefully. Application needs to ensure RTC and WDT are clocked using BCLK tree to keep these modules alive in LPM3/LPM3.5. In LPM4.5 all clocks are forcefully shutoff and the core voltage is turned off.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PMR_BUSY</name>
                        <description>Power mode request busy flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PCMKEY</name>
                        <description>PCM key</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCMIE</name>
                  <displayName>IE</displayName>
                  <description>Interrupt Enable Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LPM_INVALID_TR_IE</name>
                        <description>LPM invalid transition interrupt enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LPM_INVALID_TR_IE_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LPM_INVALID_TR_IE_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LPM_INVALID_CLK_IE</name>
                        <description>LPM invalid clock interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LPM_INVALID_CLK_IE_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LPM_INVALID_CLK_IE_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AM_INVALID_TR_IE</name>
                        <description>Active mode invalid transition interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AM_INVALID_TR_IE_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AM_INVALID_TR_IE_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCDC_ERROR_IE</name>
                        <description>DC-DC error interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DCDC_ERROR_IE_0</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCDC_ERROR_IE_1</name>
                                <description>Enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCMIFG</name>
                  <displayName>IFG</displayName>
                  <description>Interrupt Flag Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LPM_INVALID_TR_IFG</name>
                        <description>LPM invalid transition flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>LPM_INVALID_CLK_IFG</name>
                        <description>LPM invalid clock flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>AM_INVALID_TR_IFG</name>
                        <description>Active mode invalid transition flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>DCDC_ERROR_IFG</name>
                        <description>DC-DC error flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PCMCLRIFG</name>
                  <displayName>CLRIFG</displayName>
                  <description>Clear Interrupt Flag Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLR_LPM_INVALID_TR_IFG</name>
                        <description>Clear LPM invalid transition flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CLR_LPM_INVALID_CLK_IFG</name>
                        <description>Clear LPM invalid clock flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CLR_AM_INVALID_TR_IFG</name>
                        <description>Clear active mode invalid transition flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>CLR_DCDC_ERROR_IFG</name>
                        <description>Clear DC-DC error flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>CS</name>
        <version>356.0</version>
        <description>CS</description>
        <baseAddress>0x40010400</baseAddress>
        <interrupt>
            <name>CS_IRQ</name>
            <description>CS Interrupt</description>
            <value>1</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x68</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>CSKEY</name>
                  <displayName>KEY</displayName>
                  <description>Key Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x0000a596</resetValue>
                  <fields>
                    <field>
                        <name>CSKEY</name>
                        <description>Write xxxx_695Ah to unlock</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSCTL0</name>
                  <displayName>CTL0</displayName>
                  <description>Control 0 Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00010000</resetValue>
                  <fields>
                    <field>
                        <name>DCOTUNE</name>
                        <description>DCO frequency tuning select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DCORSEL</name>
                        <description>DCO frequency range select</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DCORSEL_0</name>
                                <description>Nominal DCO Frequency Range (MHz): 1 to 2</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCORSEL_1</name>
                                <description>Nominal DCO Frequency Range (MHz): 2 to 4</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCORSEL_2</name>
                                <description>Nominal DCO Frequency Range (MHz): 4 to 8</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCORSEL_3</name>
                                <description>Nominal DCO Frequency Range (MHz): 8 to 16</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCORSEL_4</name>
                                <description>Nominal DCO Frequency Range (MHz): 16 to 32</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCORSEL_5</name>
                                <description>Nominal DCO Frequency Range (MHz): 32 to 64</description>
                                <value>5</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCORES</name>
                        <description>Enables the DCO external resistor mode</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DCORES_0</name>
                                <description>Internal resistor mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCORES_1</name>
                                <description>External resistor mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCOEN</name>
                        <description>Enables the DCO oscillator</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DCOEN_0</name>
                                <description>DCO is on if it is used as a source for MCLK, HSMCLK , or SMCLK and clock is requested, otherwise it is disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCOEN_1</name>
                                <description>DCO is on</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSCTL1</name>
                  <displayName>CTL1</displayName>
                  <description>Control 1 Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000033</resetValue>
                  <fields>
                    <field>
                        <name>SELM</name>
                        <description>Selects the MCLK source</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SELM_0</name>
                                <description>when LFXT available, otherwise REFOCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELM_1</name>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELM_2</name>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELM_3</name>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELM_4</name>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELM_5</name>
                                <description>when HFXT available, otherwise DCOCLK</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELM_6</name>
                                <description>when HFXT2 available, otherwise DCOCLK</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELM_7</name>
                                <description>for future use. Defaults to DCOCLK. Not recommended for use
to ensure future compatibilities.</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SELS</name>
                        <description>Selects the SMCLK and HSMCLK source</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SELS_0</name>
                                <description>when LFXT available, otherwise REFOCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELS_1</name>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELS_2</name>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELS_3</name>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELS_4</name>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELS_5</name>
                                <description>when HFXT available, otherwise DCOCLK</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELS_6</name>
                                <description>when HFXT2 available, otherwise DCOCLK</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELS_7</name>
                                <description>for furture use. Defaults to DCOCLK. Do not use to ensure future compatibilities.</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SELA</name>
                        <description>Selects the ACLK source</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SELA_0</name>
                                <description>when LFXT available, otherwise REFOCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELA_1</name>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELA_2</name>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELA_3</name>
                                <description>for future use. Defaults to REFOCLK. Not recommended
for use to ensure future compatibilities.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELA_4</name>
                                <description>for future use. Defaults to REFOCLK. Not recommended
for use to ensure future compatibilities.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELA_5</name>
                                <description>for future use. Defaults to REFOCLK. Not recommended
for use to ensure future compatibilities.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELA_6</name>
                                <description>for future use. Defaults to REFOCLK. Not recommended
for use to ensure future compatibilities.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELA_7</name>
                                <description>for future use. Defaults to REFOCLK. Not recommended
for use to ensure future compatibilities.</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SELB</name>
                        <description>Selects the BCLK source</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SELB_0</name>
                                <description>LFXTCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SELB_1</name>
                                <description>REFOCLK</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DIVM</name>
                        <description>MCLK source divider</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DIVM_0</name>
                                <description>f(MCLK)/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVM_1</name>
                                <description>f(MCLK)/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVM_2</name>
                                <description>f(MCLK)/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVM_3</name>
                                <description>f(MCLK)/8</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVM_4</name>
                                <description>f(MCLK)/16</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVM_5</name>
                                <description>f(MCLK)/32</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVM_6</name>
                                <description>f(MCLK)/64</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVM_7</name>
                                <description>f(MCLK)/128</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DIVHS</name>
                        <description>HSMCLK source divider</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DIVHS_0</name>
                                <description>f(HSMCLK)/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVHS_1</name>
                                <description>f(HSMCLK)/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVHS_2</name>
                                <description>f(HSMCLK)/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVHS_3</name>
                                <description>f(HSMCLK)/8</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVHS_4</name>
                                <description>f(HSMCLK)/16</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVHS_5</name>
                                <description>f(HSMCLK)/32</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVHS_6</name>
                                <description>f(HSMCLK)/64</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVHS_7</name>
                                <description>f(HSMCLK)/128</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DIVA</name>
                        <description>ACLK source divider</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DIVA_0</name>
                                <description>f(ACLK)/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVA_1</name>
                                <description>f(ACLK)/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVA_2</name>
                                <description>f(ACLK)/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVA_3</name>
                                <description>f(ACLK)/8</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVA_4</name>
                                <description>f(ACLK)/16</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVA_5</name>
                                <description>f(ACLK)/32</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVA_6</name>
                                <description>f(ACLK)/64</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVA_7</name>
                                <description>f(ACLK)/128</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DIVS</name>
                        <description>SMCLK source divider</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DIVS_0</name>
                                <description>f(SMCLK)/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVS_1</name>
                                <description>f(SMCLK)/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVS_2</name>
                                <description>f(SMCLK)/4</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVS_3</name>
                                <description>f(SMCLK)/8</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVS_4</name>
                                <description>f(SMCLK)/16</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVS_5</name>
                                <description>f(SMCLK)/32</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVS_6</name>
                                <description>f(SMCLK)/64</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DIVS_7</name>
                                <description>f(SMCLK)/128</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSCTL2</name>
                  <displayName>CTL2</displayName>
                  <description>Control 2 Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00010003</resetValue>
                  <fields>
                    <field>
                        <name>LFXTDRIVE</name>
                        <description>LFXT oscillator current can be adjusted to its drive needs</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LFXTDRIVE_0</name>
                                <description>Lowest drive strength and current consumption LFXT oscillator.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTDRIVE_1</name>
                                <description>Increased drive strength LFXT oscillator.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTDRIVE_2</name>
                                <description>Increased drive strength LFXT oscillator.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTDRIVE_3</name>
                                <description>Maximum drive strength and maximum current consumption LFXT oscillator.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LFXTAGCOFF</name>
                        <description>Disables the automatic gain control of the LFXT crystal</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LFXTAGCOFF_0</name>
                                <description>AGC enabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTAGCOFF_1</name>
                                <description>AGC disabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LFXT_EN</name>
                        <description>Turns on the LFXT oscillator regardless if used as a clock resource</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LFXT_EN_0</name>
                                <description>LFXT is on if it is used as a source for ACLK, MCLK, HSMCLK , or SMCLK
and is selected via the port selection and not in bypass mode of operation.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXT_EN_1</name>
                                <description>LFXT is on if LFXT is selected via the port selection and LFXT is not in
bypass mode of operation.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LFXTBYPASS</name>
                        <description>LFXT bypass select</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LFXTBYPASS_0</name>
                                <description>LFXT sourced by external crystal.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTBYPASS_1</name>
                                <description>LFXT sourced by external square wave.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXTDRIVE</name>
                        <description>HFXT oscillator drive selection</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HFXTDRIVE_0</name>
                                <description>To be used for HFXTFREQ setting 000b</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTDRIVE_1</name>
                                <description>To be used for HFXTFREQ settings 001b to 110b</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXTFREQ</name>
                        <description>HFXT frequency selection</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HFXTFREQ_0</name>
                                <description>1 MHz to 4 MHz</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTFREQ_1</name>
                                <description>>4 MHz to 8 MHz</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTFREQ_2</name>
                                <description>>8 MHz to 16 MHz</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTFREQ_3</name>
                                <description>>16 MHz to 24 MHz</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTFREQ_4</name>
                                <description>>24 MHz to 32 MHz</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTFREQ_5</name>
                                <description>>32 MHz to 40 MHz</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTFREQ_6</name>
                                <description>>40 MHz to 48 MHz</description>
                                <value>6</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXT_EN</name>
                        <description>Turns on the HFXT oscillator regardless if used as a clock resource</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HFXT_EN_0</name>
                                <description>HFXT is on if it is used as a source for MCLK, HSMCLK , or SMCLK and is selected via the port selection and not in bypass mode of operation.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXT_EN_1</name>
                                <description>HFXT is on if HFXT is selected via the port selection and HFXT is not in bypass mode of operation.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXTBYPASS</name>
                        <description>HFXT bypass select</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HFXTBYPASS_0</name>
                                <description>HFXT sourced by external crystal.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTBYPASS_1</name>
                                <description>HFXT sourced by external square wave.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSCTL3</name>
                  <displayName>CTL3</displayName>
                  <description>Control 3 Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000bbb</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>FCNTLF</name>
                        <description>Start flag counter for LFXT</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTLF_0</name>
                                <description>4096 cycles</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTLF_1</name>
                                <description>8192 cycles</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTLF_2</name>
                                <description>16384 cycles</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTLF_3</name>
                                <description>32768 cycles</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RFCNTLF</name>
                        <description>Reset start fault counter for LFXT</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>RFCNTLF_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>RFCNTLF_0</name>
                                <description>Not applicable. Always reads as zero due to self clearing.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RFCNTLF_1</name>
                                <description>Restarts the counter immediately.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTLF_EN</name>
                        <description>Enable start fault counter for LFXT</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTLF_EN_0</name>
                                <description>Startup fault counter disabled. Counter is cleared.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTLF_EN_1</name>
                                <description>Startup fault counter enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHF</name>
                        <description>Start flag counter for HFXT</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTHF_0</name>
                                <description>2048 cycles</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF_1</name>
                                <description>4096 cycles</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF_2</name>
                                <description>8192 cycles</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF_3</name>
                                <description>16384 cycles</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RFCNTHF</name>
                        <description>Reset start fault counter for HFXT</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>RFCNTHF_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>RFCNTHF_0</name>
                                <description>Not applicable. Always reads as zero due to self clearing.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RFCNTHF_1</name>
                                <description>Restarts the counter immediately.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHF_EN</name>
                        <description>Enable start fault counter for HFXT</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTHF_EN_0</name>
                                <description>Startup fault counter disabled. Counter is cleared.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF_EN_1</name>
                                <description>Startup fault counter enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHF2</name>
                        <description>Start flag counter for HFXT2</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTHF2_0</name>
                                <description>2048 cycles</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF2_1</name>
                                <description>4096 cycles</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF2_2</name>
                                <description>8192 cycles</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF2_3</name>
                                <description>16384 cycles</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RFCNTHF2</name>
                        <description>Reset start fault counter for HFXT2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>RFCNTHF2_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>RFCNTHF2_0</name>
                                <description>Not applicable. Always reads as zero due to self clearing.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RFCNTHF2_1</name>
                                <description>Restarts the counter immediately.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHF2_EN</name>
                        <description>Enable start fault counter for HFXT2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTHF2_EN_0</name>
                                <description>Startup fault counter disabled. Counter is cleared.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF2_EN_1</name>
                                <description>Startup fault counter enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSCLKEN</name>
                  <displayName>CLKEN</displayName>
                  <description>Clock Enable Register</description>
                  <addressOffset>0x30</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x0000000f</resetValue>
                  <resetMask>0xffff847f</resetMask>
                  <fields>
                    <field>
                        <name>ACLK_EN</name>
                        <description>ACLK system clock conditional request enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ACLK_EN_0</name>
                                <description>ACLK disabled regardless of conditional clock requests</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ACLK_EN_1</name>
                                <description>ACLK enabled based on any conditional clock requests</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MCLK_EN</name>
                        <description>MCLK system clock conditional request enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MCLK_EN_0</name>
                                <description>MCLK disabled regardless of conditional clock requests</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MCLK_EN_1</name>
                                <description>MCLK enabled based on any conditional clock requests</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HSMCLK_EN</name>
                        <description>HSMCLK system clock conditional request enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HSMCLK_EN_0</name>
                                <description>HSMCLK disabled regardless of conditional clock requests</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HSMCLK_EN_1</name>
                                <description>HSMCLK enabled based on any conditional clock requests</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SMCLK_EN</name>
                        <description>SMCLK system clock conditional request enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SMCLK_EN_0</name>
                                <description>SMCLK disabled regardless of conditional clock requests.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SMCLK_EN_1</name>
                                <description>SMCLK enabled based on any conditional clock requests</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VLO_EN</name>
                        <description>Turns on the VLO oscillator</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>VLO_EN_0</name>
                                <description>VLO is on only if it is used as a source for ACLK, MCLK, HSMCLK or SMCLK.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VLO_EN_1</name>
                                <description>VLO is on</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFO_EN</name>
                        <description>Turns on the REFO oscillator</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFO_EN_0</name>
                                <description>REFO is on only if it is used as a source for ACLK, MCLK, HSMCLK or SMCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFO_EN_1</name>
                                <description>REFO is on</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MODOSC_EN</name>
                        <description>Turns on the MODOSC oscillator</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MODOSC_EN_0</name>
                                <description>MODOSC is on only if it is used as a source for ACLK, MCLK, HSMCLK or SMCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MODOSC_EN_1</name>
                                <description>MODOSC is on</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFOFSEL</name>
                        <description>Selects REFO nominal frequency</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>REFOFSEL_0</name>
                                <description>32 kHz</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFOFSEL_1</name>
                                <description>128 kHz</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSSTAT</name>
                  <displayName>STAT</displayName>
                  <description>Status Register</description>
                  <addressOffset>0x34</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0xffff01ff</resetMask>
                  <fields>
                    <field>
                        <name>DCO_ON</name>
                        <description>DCO status</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>DCO_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>DCO_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCO_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCOBIAS_ON</name>
                        <description>DCO bias status</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>DCOBIAS_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>DCOBIAS_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCOBIAS_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXT_ON</name>
                        <description>HFXT status</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>HFXT_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>HFXT_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXT_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXT2_ON</name>
                        <description>HFXT2 status</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>HFXT2_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>HFXT2_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXT2_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MODOSC_ON</name>
                        <description>MODOSC status</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>MODOSC_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>MODOSC_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MODOSC_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VLO_ON</name>
                        <description>VLO status</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>VLO_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>VLO_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VLO_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LFXT_ON</name>
                        <description>LFXT status</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>LFXT_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>LFXT_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXT_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFO_ON</name>
                        <description>REFO status</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>REFO_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>REFO_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFO_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ACLK_ON</name>
                        <description>ACLK system clock status</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ACLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ACLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ACLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MCLK_ON</name>
                        <description>MCLK system clock status</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>MCLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>MCLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MCLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HSMCLK_ON</name>
                        <description>HSMCLK system clock status</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>HSMCLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>HSMCLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HSMCLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SMCLK_ON</name>
                        <description>SMCLK system clock status</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>SMCLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SMCLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SMCLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MODCLK_ON</name>
                        <description>MODCLK system clock status</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>MODCLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>MODCLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MODCLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VLOCLK_ON</name>
                        <description>VLOCLK system clock status</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>VLOCLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>VLOCLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VLOCLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LFXTCLK_ON</name>
                        <description>LFXTCLK system clock status</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>LFXTCLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>LFXTCLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTCLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REFOCLK_ON</name>
                        <description>REFOCLK system clock status</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>REFOCLK_ON_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>REFOCLK_ON_0</name>
                                <description>Inactive</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>REFOCLK_ON_1</name>
                                <description>Active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ACLK_READY</name>
                        <description>ACLK Ready status</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ACLK_READY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ACLK_READY_0</name>
                                <description>Not ready</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ACLK_READY_1</name>
                                <description>Ready</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MCLK_READY</name>
                        <description>MCLK Ready status</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>MCLK_READY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>MCLK_READY_0</name>
                                <description>Not ready</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MCLK_READY_1</name>
                                <description>Ready</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HSMCLK_READY</name>
                        <description>HSMCLK Ready status</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>HSMCLK_READY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>HSMCLK_READY_0</name>
                                <description>Not ready</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HSMCLK_READY_1</name>
                                <description>Ready</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SMCLK_READY</name>
                        <description>SMCLK Ready status</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>SMCLK_READY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SMCLK_READY_0</name>
                                <description>Not ready</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SMCLK_READY_1</name>
                                <description>Ready</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BCLK_READY</name>
                        <description>BCLK Ready status</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>BCLK_READY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>BCLK_READY_0</name>
                                <description>Not ready</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BCLK_READY_1</name>
                                <description>Ready</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSIE</name>
                  <displayName>IE</displayName>
                  <description>Interrupt Enable Register</description>
                  <addressOffset>0x40</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LFXTIE</name>
                        <description>LFXT oscillator fault flag interrupt enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LFXTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXTIE</name>
                        <description>HFXT oscillator fault flag interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HFXTIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXT2IE</name>
                        <description>HFXT2 oscillator fault flag interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HFXT2IE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXT2IE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCOR_OPNIE</name>
                        <description>DCO external resistor open circuit fault flag interrupt enable.</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DCOR_OPNIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCOR_OPNIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTLFIE</name>
                        <description>Start fault counter interrupt enable LFXT</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTLFIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTLFIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHFIE</name>
                        <description>Start fault counter interrupt enable HFXT</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTHFIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHFIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHF2IE</name>
                        <description>Start fault counter interrupt enable HFXT2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>FCNTHF2IE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF2IE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PLLOOLIE</name>
                        <description>PLL out-of-lock interrupt enable</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PLLOOLIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PLLOOLIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PLLLOSIE</name>
                        <description>PLL loss-of-signal interrupt enable</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PLLLOSIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PLLLOSIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PLLOORIE</name>
                        <description>PLL out-of-range interrupt enable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PLLOORIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PLLOORIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CALIE</name>
                        <description>REFCNT period counter interrupt enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CALIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CALIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSIFG</name>
                  <displayName>IFG</displayName>
                  <description>Interrupt Flag Register</description>
                  <addressOffset>0x48</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000001</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LFXTIFG</name>
                        <description>LFXT oscillator fault flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>LFXTIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>LFXTIFG_0</name>
                                <description>No fault condition occurred after the last reset</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LFXTIFG_1</name>
                                <description>LFXT fault. A LFXT fault occurred after the last reset</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXTIFG</name>
                        <description>HFXT oscillator fault flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>HFXTIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>HFXTIFG_0</name>
                                <description>No fault condition occurred after the last reset</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXTIFG_1</name>
                                <description>HFXT fault. A HFXT fault occurred after the last reset</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFXT2IFG</name>
                        <description>HFXT2 oscillator fault flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>HFXT2IFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>HFXT2IFG_0</name>
                                <description>No fault condition occurred after the last reset</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HFXT2IFG_1</name>
                                <description>HFXT2 fault. A HFXT2 fault occurred after the last reset</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCOR_SHTIFG</name>
                        <description>DCO external resistor short circuit fault flag.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>DCOR_SHTIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>DCOR_SHTIFG_0</name>
                                <description>DCO external resistor present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCOR_SHTIFG_1</name>
                                <description>DCO external resistor short circuit fault</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCOR_OPNIFG</name>
                        <description>DCO external resistor open circuit fault flag.</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>DCOR_OPNIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>DCOR_OPNIFG_0</name>
                                <description>DCO external resistor present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCOR_OPNIFG_1</name>
                                <description>DCO external resistor open circuit fault</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTLFIFG</name>
                        <description>Start fault counter interrupt flag LFXT</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>FCNTLFIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>FCNTLFIFG_0</name>
                                <description>Start counter not expired</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTLFIFG_1</name>
                                <description>Start counter expired</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHFIFG</name>
                        <description>Start fault counter interrupt flag HFXT</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>FCNTHFIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>FCNTHFIFG_0</name>
                                <description>Start counter not expired</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHFIFG_1</name>
                                <description>Start counter expired</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FCNTHF2IFG</name>
                        <description>Start fault counter interrupt flag HFXT2</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>FCNTHF2IFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>FCNTHF2IFG_0</name>
                                <description>Start counter not expired</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>FCNTHF2IFG_1</name>
                                <description>Start counter expired</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PLLOOLIFG</name>
                        <description>PLL out-of-lock interrupt flag</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>PLLOOLIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>PLLOOLIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PLLOOLIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PLLLOSIFG</name>
                        <description>PLL loss-of-signal interrupt flag</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>PLLLOSIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>PLLLOSIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PLLLOSIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PLLOORIFG</name>
                        <description>PLL out-of-range interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>PLLOORIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>PLLOORIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PLLOORIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CALIFG</name>
                        <description>REFCNT period counter expired</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CALIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>CALIFG_0</name>
                                <description>REFCNT period counter not expired</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CALIFG_1</name>
                                <description>REFCNT period counter expired</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSCLRIFG</name>
                  <displayName>CLRIFG</displayName>
                  <description>Clear Interrupt Flag Register</description>
                  <addressOffset>0x50</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLR_LFXTIFG</name>
                        <description>Clear LFXT oscillator fault interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_LFXTIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_LFXTIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_LFXTIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_HFXTIFG</name>
                        <description>Clear HFXT oscillator fault interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_HFXTIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_HFXTIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_HFXTIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_HFXT2IFG</name>
                        <description>Clear HFXT2 oscillator fault interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_HFXT2IFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_HFXT2IFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_HFXT2IFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_DCOR_OPNIFG</name>
                        <description>Clear DCO external resistor open circuit fault interrupt flag.</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_DCOR_OPNIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_DCOR_OPNIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_DCOR_OPNIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_CALIFG</name>
                        <description>REFCNT period counter clear interrupt flag</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_CALIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_CALIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_CALIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_FCNTLFIFG</name>
                        <description>Start fault counter clear interrupt flag LFXT</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_FCNTLFIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_FCNTLFIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_FCNTLFIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_FCNTHFIFG</name>
                        <description>Start fault counter clear interrupt flag HFXT</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_FCNTHFIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_FCNTHFIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_FCNTHFIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_FCNTHF2IFG</name>
                        <description>Start fault counter clear interrupt flag HFXT2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_FCNTHF2IFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_FCNTHF2IFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_FCNTHF2IFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_PLLOOLIFG</name>
                        <description>PLL out-of-lock clear interrupt flag</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_PLLOOLIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_PLLOOLIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_PLLOOLIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_PLLLOSIFG</name>
                        <description>PLL loss-of-signal clear interrupt flag</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_PLLLOSIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_PLLLOSIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_PLLLOSIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLR_PLLOORIFG</name>
                        <description>PLL out-of-range clear interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLR_PLLOORIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLR_PLLOORIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLR_PLLOORIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSSETIFG</name>
                  <displayName>SETIFG</displayName>
                  <description>Set Interrupt Flag Register</description>
                  <addressOffset>0x58</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SET_LFXTIFG</name>
                        <description>Set LFXT oscillator fault interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_LFXTIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_LFXTIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_LFXTIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_HFXTIFG</name>
                        <description>Set HFXT oscillator fault interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_HFXTIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_HFXTIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_HFXTIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_HFXT2IFG</name>
                        <description>Set HFXT2 oscillator fault interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_HFXT2IFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_HFXT2IFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_HFXT2IFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_DCOR_OPNIFG</name>
                        <description>Set DCO external resistor open circuit fault interrupt flag.</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_DCOR_OPNIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_DCOR_OPNIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_DCOR_OPNIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_CALIFG</name>
                        <description>REFCNT period counter set interrupt flag</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_CALIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_CALIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_CALIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_FCNTHFIFG</name>
                        <description>Start fault counter set interrupt flag HFXT</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_FCNTHFIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_FCNTHFIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_FCNTHFIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_FCNTHF2IFG</name>
                        <description>Start fault counter set interrupt flag HFXT2</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_FCNTHF2IFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_FCNTHF2IFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_FCNTHF2IFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_FCNTLFIFG</name>
                        <description>Start fault counter set interrupt flag LFXT</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_FCNTLFIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_FCNTLFIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_FCNTLFIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_PLLOOLIFG</name>
                        <description>PLL out-of-lock set interrupt flag</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_PLLOOLIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_PLLOOLIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_PLLOOLIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_PLLLOSIFG</name>
                        <description>PLL loss-of-signal set interrupt flag</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_PLLLOSIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_PLLLOSIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_PLLLOSIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SET_PLLOORIFG</name>
                        <description>PLL out-of-range set interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>SET_PLLOORIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>SET_PLLOORIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SET_PLLOORIFG_1</name>
                                <description>Set pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSDCOERCAL0</name>
                  <displayName>DCOERCAL0</displayName>
                  <description>DCO External Resistor Cailbration 0 Register</description>
                  <addressOffset>0x60</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x01000000</resetValue>
                  <fields>
                    <field>
                        <name>DCO_TCCAL</name>
                        <description>DCO Temperature compensation calibration</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DCO_FCAL_RSEL04</name>
                        <description>DCO frequency calibration for DCO frequency range (DCORSEL) 0 to 4.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CSDCOERCAL1</name>
                  <displayName>DCOERCAL1</displayName>
                  <description>DCO External Resistor Calibration 1 Register</description>
                  <addressOffset>0x64</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000100</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DCO_FCAL_RSEL5</name>
                        <description>DCO frequency calibration for DCO frequency range (DCORSEL) 5.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0xA</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>PSS</name>
        <version>356.0</version>
        <description>PSS</description>
        <baseAddress>0x40010800</baseAddress>
        <interrupt>
            <name>PSS_IRQ</name>
            <description>PSS Interrupt</description>
            <value>0</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x40</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>PSSKEY</name>
                  <displayName>KEY</displayName>
                  <description>Key Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x0000a596</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>PSSKEY</name>
                        <description>PSS control key</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PSSCTL0</name>
                  <displayName>CTL0</displayName>
                  <description>Control 0 Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00002000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SVSMHOFF</name>
                        <description>SVSM high-side off</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SVSMHOFF_0</name>
                                <description>The SVSMH is on</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SVSMHOFF_1</name>
                                <description>The SVSMH is off</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SVSMHLP</name>
                        <description>SVSM high-side low power normal performance mode</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SVSMHLP_0</name>
                                <description>Full performance mode. See the device-specific data sheet for response times.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SVSMHLP_1</name>
                                <description>Low power normal performance mode in LPM3, LPM4, and LPMx.5, full performance in all other modes. See the device-specific data sheet for response times.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SVSMHS</name>
                        <description>Supply supervisor or monitor selection for the high-side</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SVSMHS_0</name>
                                <description>Configure as SVSH</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SVSMHS_1</name>
                                <description>Configure as SVMH</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SVSMHTH</name>
                        <description>SVSM high-side reset voltage level</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SVMHOE</name>
                        <description>SVSM high-side output enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SVMHOE_0</name>
                                <description>SVSMHIFG bit is not output</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SVMHOE_1</name>
                                <description>SVSMHIFG bit is output to the device SVMHOUT pin. The device-specific port logic must be configured accordingly</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SVMHOUTPOLAL</name>
                        <description>SVMHOUT pin polarity active low</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SVMHOUTPOLAL_0</name>
                                <description>SVMHOUT is active high. An error condition is signaled by a 1 at the SVMHOUT pin</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SVMHOUTPOLAL_1</name>
                                <description>SVMHOUT is active low. An error condition is signaled by a 0 at the SVMHOUT pin</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DCDC_FORCE</name>
                        <description>Force DC-DC regulator operation</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DCDC_FORCE_0</name>
                                <description>DC-DC regulator operation not forced. Automatic fail-safe mechanism switches the core voltage regulator from DC-DC to LDO when the supply voltage falls below the minimum supply voltage necessary for DC-DC operation.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DCDC_FORCE_1</name>
                                <description>DC-DC regulator operation forced. Automatic fail-safe mechanism is disabled and device continues to operate out of DC-DC regulator.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VCORETRAN</name>
                        <description>Controls core voltage level transition time</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>VCORETRAN_0</name>
                                <description>32 s / 100 mV</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VCORETRAN_1</name>
                                <description>64 s / 100 mV</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VCORETRAN_2</name>
                                <description>128 s / 100 mV (default)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VCORETRAN_3</name>
                                <description>256 s / 100 mV</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PSSIE</name>
                  <displayName>IE</displayName>
                  <description>Interrupt Enable Register</description>
                  <addressOffset>0x34</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SVSMHIE</name>
                        <description>High-side SVSM interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>SVSMHIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SVSMHIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PSSIFG</name>
                  <displayName>IFG</displayName>
                  <description>Interrupt Flag Register</description>
                  <addressOffset>0x38</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SVSMHIFG</name>
                        <description>High-side SVSM interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>SVSMHIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SVSMHIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SVSMHIFG_1</name>
                                <description>Interrupt due to SVSMH</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PSSCLRIFG</name>
                  <displayName>CLRIFG</displayName>
                  <description>Clear Interrupt Flag Register</description>
                  <addressOffset>0x3C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLRSVSMHIFG</name>
                        <description>SVSMH clear interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRSVSMHIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRSVSMHIFG_0</name>
                                <description>No effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRSVSMHIFG_1</name>
                                <description>Clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>FLCTL</name>
        <version>356.0</version>
        <description>FLCTL</description>
        <baseAddress>0x40011000</baseAddress>
        <interrupt>
            <name>FLCTL_IRQ</name>
            <description>Flash Controller Interrupt</description>
            <value>5</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x124</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>FLCTL_POWER_STAT</name>
                  <displayName>POWER_STAT</displayName>
                  <description>Power Status Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000080</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>PSTAT</name>
                        <description>Flash power status</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PSTAT_0</name>
                                <description>Flash IP in power-down mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSTAT_1</name>
                                <description>Flash IP Vdd domain power-up in progress</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSTAT_2</name>
                                <description>PSS LDO_GOOD, IREF_OK and VREF_OK check in progress</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSTAT_3</name>
                                <description>Flash IP SAFE_LV check in progress</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSTAT_4</name>
                                <description>Flash IP Active</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSTAT_5</name>
                                <description>Flash IP Active in Low-Frequency Active and Low-Frequency LPM0 modes.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSTAT_6</name>
                                <description>Flash IP in Standby mode</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSTAT_7</name>
                                <description>Flash IP in Current mirror boost state</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LDOSTAT</name>
                        <description>PSS FLDO GOOD status</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LDOSTAT_0</name>
                                <description>FLDO not GOOD</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LDOSTAT_1</name>
                                <description>FLDO GOOD</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VREFSTAT</name>
                        <description>PSS VREF stable status</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>VREFSTAT_0</name>
                                <description>Flash LDO not stable</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VREFSTAT_1</name>
                                <description>Flash LDO stable</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>IREFSTAT</name>
                        <description>PSS IREF stable status</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>IREFSTAT_0</name>
                                <description>IREF not stable</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>IREFSTAT_1</name>
                                <description>IREF stable</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TRIMSTAT</name>
                        <description>PSS trim done status</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TRIMSTAT_0</name>
                                <description>PSS trim not complete</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TRIMSTAT_1</name>
                                <description>PSS trim complete</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RD_2T</name>
                        <description>Indicates if Flash is being accessed in 2T mode</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RD_2T_0</name>
                                <description>Flash reads are in 1T mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_2T_1</name>
                                <description>Flash reads are in 2T mode</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BANK0_RDCTL</name>
                  <displayName>BANK0_RDCTL</displayName>
                  <description>Bank0 Read Control Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RD_MODE</name>
                        <description>Flash read mode control setting for Bank 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RD_MODE_0</name>
                                <description>Normal read mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_1</name>
                                <description>Read Margin 0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_2</name>
                                <description>Read Margin 1</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_3</name>
                                <description>Program Verify</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_4</name>
                                <description>Erase Verify</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_5</name>
                                <description>Leakage Verify</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_9</name>
                                <description>Read Margin 0B</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_10</name>
                                <description>Read Margin 1B</description>
                                <value>10</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BUFI</name>
                        <description>Enables read buffering feature for instruction fetches to this Bank</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BUFD</name>
                        <description>Enables read buffering feature for data reads to this Bank</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>WAIT</name>
                        <description>Number of wait states for read</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>WAIT_0</name>
                                <description>0 wait states</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_1</name>
                                <description>1 wait states</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_2</name>
                                <description>2 wait states</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_3</name>
                                <description>3 wait states</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_4</name>
                                <description>4 wait states</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_5</name>
                                <description>5 wait states</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_6</name>
                                <description>6 wait states</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_7</name>
                                <description>7 wait states</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_8</name>
                                <description>8 wait states</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_9</name>
                                <description>9 wait states</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_10</name>
                                <description>10 wait states</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_11</name>
                                <description>11 wait states</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_12</name>
                                <description>12 wait states</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_13</name>
                                <description>13 wait states</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_14</name>
                                <description>14 wait states</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_15</name>
                                <description>15 wait states</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>RD_MODE_STATUS</name>
                        <description>Read mode</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_0</name>
                                <description>Normal read mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_1</name>
                                <description>Read Margin 0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_2</name>
                                <description>Read Margin 1</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_3</name>
                                <description>Program Verify</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_4</name>
                                <description>Erase Verify</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_5</name>
                                <description>Leakage Verify</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_9</name>
                                <description>Read Margin 0B</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_10</name>
                                <description>Read Margin 1B</description>
                                <value>10</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BANK1_RDCTL</name>
                  <displayName>BANK1_RDCTL</displayName>
                  <description>Bank1 Read Control Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RD_MODE</name>
                        <description>Flash read mode control setting for Bank 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RD_MODE_0</name>
                                <description>Normal read mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_1</name>
                                <description>Read Margin 0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_2</name>
                                <description>Read Margin 1</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_3</name>
                                <description>Program Verify</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_4</name>
                                <description>Erase Verify</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_5</name>
                                <description>Leakage Verify</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_9</name>
                                <description>Read Margin 0B</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_10</name>
                                <description>Read Margin 1B</description>
                                <value>10</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BUFI</name>
                        <description>Enables read buffering feature for instruction fetches to this Bank</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BUFD</name>
                        <description>Enables read buffering feature for data reads to this Bank</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>RD_MODE_STATUS</name>
                        <description>Read mode</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_0</name>
                                <description>Normal read mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_1</name>
                                <description>Read Margin 0</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_2</name>
                                <description>Read Margin 1</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_3</name>
                                <description>Program Verify</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_4</name>
                                <description>Erase Verify</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_5</name>
                                <description>Leakage Verify</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_9</name>
                                <description>Read Margin 0B</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>RD_MODE_STATUS_10</name>
                                <description>Read Margin 1B</description>
                                <value>10</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WAIT</name>
                        <description>Number of wait states for read</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>WAIT_0</name>
                                <description>0 wait states</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_1</name>
                                <description>1 wait states</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_2</name>
                                <description>2 wait states</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_3</name>
                                <description>3 wait states</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_4</name>
                                <description>4 wait states</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_5</name>
                                <description>5 wait states</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_6</name>
                                <description>6 wait states</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_7</name>
                                <description>7 wait states</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_8</name>
                                <description>8 wait states</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_9</name>
                                <description>9 wait states</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_10</name>
                                <description>10 wait states</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_11</name>
                                <description>11 wait states</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_12</name>
                                <description>12 wait states</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_13</name>
                                <description>13 wait states</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_14</name>
                                <description>14 wait states</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>WAIT_15</name>
                                <description>15 wait states</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_RDBRST_CTLSTAT</name>
                  <displayName>RDBRST_CTLSTAT</displayName>
                  <description>Read Burst/Compare Control and Status Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>START</name>
                        <description>Start of burst/compare operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>MEM_TYPE</name>
                        <description>Type of memory that burst is carried out on</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MEM_TYPE_0</name>
                                <description>Main Memory</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MEM_TYPE_1</name>
                                <description>Information Memory</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MEM_TYPE_3</name>
                                <description>Engineering Memory</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>STOP_FAIL</name>
                        <description>Terminate burst/compare operation</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATA_CMP</name>
                        <description>Data pattern used for comparison against memory read data</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>DATA_CMP_0</name>
                                <description>0000_0000_0000_0000_0000_0000_0000_0000</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>DATA_CMP_1</name>
                                <description>FFFF_FFFF_FFFF_FFFF_FFFF_FFFF_FFFF_FFFF</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TEST_EN</name>
                        <description>Enable comparison against test data compare registers</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BRST_STAT</name>
                        <description>Status of Burst/Compare operation</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BRST_STAT_0</name>
                                <description>Idle</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BRST_STAT_1</name>
                                <description>Burst/Compare START bit written, but operation pending</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BRST_STAT_2</name>
                                <description>Burst/Compare in progress</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BRST_STAT_3</name>
                                <description>Burst complete (status of completed burst remains in this state unless explicitly cleared by SW)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CMP_ERR</name>
                        <description>Burst/Compare Operation encountered atleast one data</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ADDR_ERR</name>
                        <description>Burst/Compare Operation was terminated due to access to</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CLR_STAT</name>
                        <description>Clear status bits 19-16 of this register</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_RDBRST_STARTADDR</name>
                  <displayName>RDBRST_STARTADDR</displayName>
                  <description>Read Burst/Compare Start Address Register</description>
                  <addressOffset>0x24</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>START_ADDRESS</name>
                        <description>Start Address of Burst Operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x15</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_RDBRST_LEN</name>
                  <displayName>RDBRST_LEN</displayName>
                  <description>Read Burst/Compare Length Register</description>
                  <addressOffset>0x28</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>BURST_LENGTH</name>
                        <description>Length of Burst Operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x15</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_RDBRST_FAILADDR</name>
                  <displayName>RDBRST_FAILADDR</displayName>
                  <description>Read Burst/Compare Fail Address Register</description>
                  <addressOffset>0x3C</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>FAIL_ADDRESS</name>
                        <description>Reflects address of last failed compare</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x15</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_RDBRST_FAILCNT</name>
                  <displayName>RDBRST_FAILCNT</displayName>
                  <description>Read Burst/Compare Fail Count Register</description>
                  <addressOffset>0x40</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>FAIL_COUNT</name>
                        <description>Number of failures encountered in burst operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x11</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRG_CTLSTAT</name>
                  <displayName>PRG_CTLSTAT</displayName>
                  <description>Program Control and Status Register</description>
                  <addressOffset>0x50</addressOffset>
                  <size>32</size>
                  <resetValue>0x0000000c</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Master control for all word program operations</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ENABLE_0</name>
                                <description>Word program operation disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ENABLE_1</name>
                                <description>Word program operation enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MODE</name>
                        <description>Write mode</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MODE_0</name>
                                <description>Write immediate mode. Starts program operation immediately on each write to the Flash</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MODE_1</name>
                                <description>Full word write mode. Flash controller collates data over multiple writes to compose the full 128bit word before initiating the program operation</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VER_PRE</name>
                        <description>Controls automatic pre program verify operations</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>VER_PRE_0</name>
                                <description>No pre program verification</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VER_PRE_1</name>
                                <description>Pre verify feature automatically invoked for each write operation (irrespective of the mode)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VER_PST</name>
                        <description>Controls automatic post program verify operations</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>VER_PST_0</name>
                                <description>No post program verification</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VER_PST_1</name>
                                <description>Post verify feature automatically invoked for each write operation (irrespective of the mode)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>STATUS</name>
                        <description>Status of program operations in the Flash memory</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>STATUS_0</name>
                                <description>Idle (no program operation currently active)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATUS_1</name>
                                <description>Single word program operation triggered, but pending</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATUS_2</name>
                                <description>Single word program in progress</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK_ACT</name>
                        <description>Bank active</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK_ACT_0</name>
                                <description>Word in Bank0 being programmed</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK_ACT_1</name>
                                <description>Word in Bank1 being programmed</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_CTLSTAT</name>
                  <displayName>PRGBRST_CTLSTAT</displayName>
                  <description>Program Burst Control and Status Register</description>
                  <addressOffset>0x54</addressOffset>
                  <size>32</size>
                  <resetValue>0x000000c0</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>START</name>
                        <description>Trigger start of burst program operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>TYPE</name>
                        <description>Type of memory that burst program is carried out on</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TYPE_0</name>
                                <description>Main Memory</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TYPE_1</name>
                                <description>Information Memory</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TYPE_3</name>
                                <description>Engineering Memory</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LEN</name>
                        <description>Length of burst</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>LEN_0</name>
                                <description>No burst operation</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LEN_1</name>
                                <description>1 word burst of 128 bits, starting with address in the FLCTL_PRGBRST_STARTADDR Register</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LEN_2</name>
                                <description>2*128 bits burst write, starting with address in the FLCTL_PRGBRST_STARTADDR Register</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LEN_3</name>
                                <description>3*128 bits burst write, starting with address in the FLCTL_PRGBRST_STARTADDR Register</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>LEN_4</name>
                                <description>4*128 bits burst write, starting with address in the FLCTL_PRGBRST_STARTADDR Register</description>
                                <value>4</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AUTO_PRE</name>
                        <description>Auto-Verify operation before the Burst Program</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AUTO_PRE_0</name>
                                <description>No program verify operations carried out</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AUTO_PRE_1</name>
                                <description>Causes an automatic Burst Program Verify after the Burst Program Operation</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AUTO_PST</name>
                        <description>Auto-Verify operation after the Burst Program</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>AUTO_PST_0</name>
                                <description>No program verify operations carried out</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>AUTO_PST_1</name>
                                <description>Causes an automatic Burst Program Verify before the Burst Program Operation</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BURST_STATUS</name>
                        <description>Status of a Burst Operation</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BURST_STATUS_0</name>
                                <description>Idle (Burst not active)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BURST_STATUS_1</name>
                                <description>Burst program started but pending</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BURST_STATUS_2</name>
                                <description>Burst active, with 1st 128 bit word being written into Flash</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BURST_STATUS_3</name>
                                <description>Burst active, with 2nd 128 bit word being written into Flash</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BURST_STATUS_4</name>
                                <description>Burst active, with 3rd 128 bit word being written into Flash</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BURST_STATUS_5</name>
                                <description>Burst active, with 4th 128 bit word being written into Flash</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BURST_STATUS_7</name>
                                <description>Burst Complete (status of completed burst remains in this state unless explicitly cleared by SW)</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PRE_ERR</name>
                        <description>Burst Operation encountered preprogram auto-verify errors</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>PST_ERR</name>
                        <description>Burst Operation encountered postprogram auto-verify errors</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ADDR_ERR</name>
                        <description>Burst Operation was terminated due to attempted program of reserved memory</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CLR_STAT</name>
                        <description>Clear status bits 21-16 of this register</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_STARTADDR</name>
                  <displayName>PRGBRST_STARTADDR</displayName>
                  <description>Program Burst Start Address Register</description>
                  <addressOffset>0x58</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>START_ADDRESS</name>
                        <description>Start Address of Program Burst Operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x16</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA0_0</name>
                  <displayName>PRGBRST_DATA0_0</displayName>
                  <description>Program Burst Data0 Register0</description>
                  <addressOffset>0x60</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA0_1</name>
                  <displayName>PRGBRST_DATA0_1</displayName>
                  <description>Program Burst Data0 Register1</description>
                  <addressOffset>0x64</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA0_2</name>
                  <displayName>PRGBRST_DATA0_2</displayName>
                  <description>Program Burst Data0 Register2</description>
                  <addressOffset>0x68</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA0_3</name>
                  <displayName>PRGBRST_DATA0_3</displayName>
                  <description>Program Burst Data0 Register3</description>
                  <addressOffset>0x6C</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA1_0</name>
                  <displayName>PRGBRST_DATA1_0</displayName>
                  <description>Program Burst Data1 Register0</description>
                  <addressOffset>0x70</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA1_1</name>
                  <displayName>PRGBRST_DATA1_1</displayName>
                  <description>Program Burst Data1 Register1</description>
                  <addressOffset>0x74</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA1_2</name>
                  <displayName>PRGBRST_DATA1_2</displayName>
                  <description>Program Burst Data1 Register2</description>
                  <addressOffset>0x78</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA1_3</name>
                  <displayName>PRGBRST_DATA1_3</displayName>
                  <description>Program Burst Data1 Register3</description>
                  <addressOffset>0x7C</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA2_0</name>
                  <displayName>PRGBRST_DATA2_0</displayName>
                  <description>Program Burst Data2 Register0</description>
                  <addressOffset>0x80</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 2</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA2_1</name>
                  <displayName>PRGBRST_DATA2_1</displayName>
                  <description>Program Burst Data2 Register1</description>
                  <addressOffset>0x84</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 2</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA2_2</name>
                  <displayName>PRGBRST_DATA2_2</displayName>
                  <description>Program Burst Data2 Register2</description>
                  <addressOffset>0x88</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 2</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA2_3</name>
                  <displayName>PRGBRST_DATA2_3</displayName>
                  <description>Program Burst Data2 Register3</description>
                  <addressOffset>0x8C</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 2</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA3_0</name>
                  <displayName>PRGBRST_DATA3_0</displayName>
                  <description>Program Burst Data3 Register0</description>
                  <addressOffset>0x90</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 3</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA3_1</name>
                  <displayName>PRGBRST_DATA3_1</displayName>
                  <description>Program Burst Data3 Register1</description>
                  <addressOffset>0x94</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 3</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA3_2</name>
                  <displayName>PRGBRST_DATA3_2</displayName>
                  <description>Program Burst Data3 Register2</description>
                  <addressOffset>0x98</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 3</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGBRST_DATA3_3</name>
                  <displayName>PRGBRST_DATA3_3</displayName>
                  <description>Program Burst Data3 Register3</description>
                  <addressOffset>0x9C</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DATAIN</name>
                        <description>Program Burst 128 bit Data Word 3</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_ERASE_CTLSTAT</name>
                  <displayName>ERASE_CTLSTAT</displayName>
                  <description>Erase Control and Status Register</description>
                  <addressOffset>0xA0</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>START</name>
                        <description>Start of Erase operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>MODE</name>
                        <description>Erase mode selected by application</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>MODE_0</name>
                                <description>Sector Erase (controlled by FLTCTL_ERASE_SECTADDR)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>MODE_1</name>
                                <description>Mass Erase (includes all Main and Information memory sectors that don't have corresponding WE bits set)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TYPE</name>
                        <description>Type of memory that erase operation is carried out on</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TYPE_0</name>
                                <description>Main Memory</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TYPE_1</name>
                                <description>Information Memory</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TYPE_3</name>
                                <description>Engineering Memory</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>STATUS</name>
                        <description>Status of erase operations in the Flash memory</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>STATUS_0</name>
                                <description>Idle (no program operation currently active)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATUS_1</name>
                                <description>Erase operation triggered to START but pending</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATUS_2</name>
                                <description>Erase operation in progress</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>STATUS_3</name>
                                <description>Erase operation completed (status of completed erase remains in this state unless explicitly cleared by SW)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADDR_ERR</name>
                        <description>Erase Operation was terminated due to attempted erase of reserved memory address</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CLR_STAT</name>
                        <description>Clear status bits 18-16 of this register</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_ERASE_SECTADDR</name>
                  <displayName>ERASE_SECTADDR</displayName>
                  <description>Erase Sector Address Register</description>
                  <addressOffset>0xA4</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SECT_ADDRESS</name>
                        <description>Address of Sector being Erased</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x16</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BANK0_INFO_WEPROT</name>
                  <displayName>BANK0_INFO_WEPROT</displayName>
                  <description>Information Memory Bank0 Write/Erase Protection Register</description>
                  <addressOffset>0xB0</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>PROT0</name>
                        <description>Protects Sector 0 from program or erase</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT1</name>
                        <description>Protects Sector 1 from program or erase</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BANK0_MAIN_WEPROT</name>
                  <displayName>BANK0_MAIN_WEPROT</displayName>
                  <description>Main Memory Bank0 Write/Erase Protection Register</description>
                  <addressOffset>0xB4</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>PROT0</name>
                        <description>Protects Sector 0 from program or erase</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT1</name>
                        <description>Protects Sector 1 from program or erase</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT2</name>
                        <description>Protects Sector 2 from program or erase</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT3</name>
                        <description>Protects Sector 3 from program or erase</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT4</name>
                        <description>Protects Sector 4 from program or erase</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT5</name>
                        <description>Protects Sector 5 from program or erase</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT6</name>
                        <description>Protects Sector 6 from program or erase</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT7</name>
                        <description>Protects Sector 7 from program or erase</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT8</name>
                        <description>Protects Sector 8 from program or erase</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT9</name>
                        <description>Protects Sector 9 from program or erase</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT10</name>
                        <description>Protects Sector 10 from program or erase</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT11</name>
                        <description>Protects Sector 11 from program or erase</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT12</name>
                        <description>Protects Sector 12 from program or erase</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT13</name>
                        <description>Protects Sector 13 from program or erase</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT14</name>
                        <description>Protects Sector 14 from program or erase</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT15</name>
                        <description>Protects Sector 15 from program or erase</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT16</name>
                        <description>Protects Sector 16 from program or erase</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT17</name>
                        <description>Protects Sector 17 from program or erase</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT18</name>
                        <description>Protects Sector 18 from program or erase</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT19</name>
                        <description>Protects Sector 19 from program or erase</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT20</name>
                        <description>Protects Sector 20 from program or erase</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT21</name>
                        <description>Protects Sector 21 from program or erase</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT22</name>
                        <description>Protects Sector 22 from program or erase</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT23</name>
                        <description>Protects Sector 23 from program or erase</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT24</name>
                        <description>Protects Sector 24 from program or erase</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT25</name>
                        <description>Protects Sector 25 from program or erase</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT26</name>
                        <description>Protects Sector 26 from program or erase</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT27</name>
                        <description>Protects Sector 27 from program or erase</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT28</name>
                        <description>Protects Sector 28 from program or erase</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT29</name>
                        <description>Protects Sector 29 from program or erase</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT30</name>
                        <description>Protects Sector 30 from program or erase</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT31</name>
                        <description>Protects Sector 31 from program or erase</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BANK1_INFO_WEPROT</name>
                  <displayName>BANK1_INFO_WEPROT</displayName>
                  <description>Information Memory Bank1 Write/Erase Protection Register</description>
                  <addressOffset>0xC0</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>PROT0</name>
                        <description>Protects Sector 0 from program or erase operations</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT1</name>
                        <description>Protects Sector 1 from program or erase operations</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BANK1_MAIN_WEPROT</name>
                  <displayName>BANK1_MAIN_WEPROT</displayName>
                  <description>Main Memory Bank1 Write/Erase Protection Register</description>
                  <addressOffset>0xC4</addressOffset>
                  <size>32</size>
                  <resetValue>0xffffffff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>PROT0</name>
                        <description>Protects Sector 0 from program or erase operations</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT1</name>
                        <description>Protects Sector 1 from program or erase operations</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT2</name>
                        <description>Protects Sector 2 from program or erase operations</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT3</name>
                        <description>Protects Sector 3 from program or erase operations</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT4</name>
                        <description>Protects Sector 4 from program or erase operations</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT5</name>
                        <description>Protects Sector 5 from program or erase operations</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT6</name>
                        <description>Protects Sector 6 from program or erase operations</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT7</name>
                        <description>Protects Sector 7 from program or erase operations</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT8</name>
                        <description>Protects Sector 8 from program or erase operations</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT9</name>
                        <description>Protects Sector 9 from program or erase operations</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT10</name>
                        <description>Protects Sector 10 from program or erase operations</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT11</name>
                        <description>Protects Sector 11 from program or erase operations</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT12</name>
                        <description>Protects Sector 12 from program or erase operations</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT13</name>
                        <description>Protects Sector 13 from program or erase operations</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT14</name>
                        <description>Protects Sector 14 from program or erase operations</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT15</name>
                        <description>Protects Sector 15 from program or erase operations</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT16</name>
                        <description>Protects Sector 16 from program or erase operations</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT17</name>
                        <description>Protects Sector 17 from program or erase operations</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT18</name>
                        <description>Protects Sector 18 from program or erase operations</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT19</name>
                        <description>Protects Sector 19 from program or erase operations</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT20</name>
                        <description>Protects Sector 20 from program or erase operations</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT21</name>
                        <description>Protects Sector 21 from program or erase operations</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT22</name>
                        <description>Protects Sector 22 from program or erase operations</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT23</name>
                        <description>Protects Sector 23 from program or erase operations</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT24</name>
                        <description>Protects Sector 24 from program or erase operations</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT25</name>
                        <description>Protects Sector 25 from program or erase operations</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT26</name>
                        <description>Protects Sector 26 from program or erase operations</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT27</name>
                        <description>Protects Sector 27 from program or erase operations</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT28</name>
                        <description>Protects Sector 28 from program or erase operations</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT29</name>
                        <description>Protects Sector 29 from program or erase operations</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT30</name>
                        <description>Protects Sector 30 from program or erase operations</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PROT31</name>
                        <description>Protects Sector 31 from program or erase operations</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BMRK_CTLSTAT</name>
                  <displayName>BMRK_CTLSTAT</displayName>
                  <description>Benchmark Control and Status Register</description>
                  <addressOffset>0xD0</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>I_BMRK</name>
                        <description>When 1, increments the Instruction Benchmark count register on each instruction fetch to the Flash</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>D_BMRK</name>
                        <description>When 1, increments the Data Benchmark count register on each data read access to the Flash</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CMP_EN</name>
                        <description>When 1, enables comparison of the Instruction or Data Benchmark Registers against the threshold value</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CMP_SEL</name>
                        <description>Selects which benchmark register should be compared against the threshold</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_1_0x0</name>
                                <description>Compares the Instruction Benchmark Register against the threshold value</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_2_0x1</name>
                                <description>Compares the Data Benchmark Register against the threshold value</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BMRK_IFETCH</name>
                  <displayName>BMRK_IFETCH</displayName>
                  <description>Benchmark Instruction Fetch Count Register</description>
                  <addressOffset>0xD4</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>COUNT</name>
                        <description>Reflects the number of Instruction Fetches to the Flash (increments by one on each fetch)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BMRK_DREAD</name>
                  <displayName>BMRK_DREAD</displayName>
                  <description>Benchmark Data Read Count Register</description>
                  <addressOffset>0xD8</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>COUNT</name>
                        <description>Reflects the number of Data Read operations to the Flash (increments by one on each read)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BMRK_CMP</name>
                  <displayName>BMRK_CMP</displayName>
                  <description>Benchmark Count Compare Register</description>
                  <addressOffset>0xDC</addressOffset>
                  <size>32</size>
                  <resetValue>0x00010000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>COUNT</name>
                        <description>Reflects the threshold value that is compared against either the IFETCH or DREAD Benchmark Counters</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_IFG</name>
                  <displayName>IFG</displayName>
                  <description>Interrupt Flag Register</description>
                  <addressOffset>0xF0</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RDBRST</name>
                        <description>If set to 1, indicates that the Read Burst/Compare operation is complete</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>AVPRE</name>
                        <description>If set to 1, indicates that the pre-program verify operation has detected an error</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>AVPST</name>
                        <description>If set to 1, indicates that the post-program verify operation has failed comparison</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>PRG</name>
                        <description>If set to 1, indicates that a word Program operation is complete</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>PRGB</name>
                        <description>If set to 1, indicates that the configured Burst Program operation is complete</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ERASE</name>
                        <description>If set to 1, indicates that the Erase operation is complete</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>BMRK</name>
                        <description>If set to 1, indicates that a Benchmark Compare match occurred</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>PRG_ERR</name>
                        <description>If set to 1, indicates a word composition error in full word write mode (possible data loss due to writes crossing over to a new 128bit boundary before full word has been composed)</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_IE</name>
                  <displayName>IE</displayName>
                  <description>Interrupt Enable Register</description>
                  <addressOffset>0xF4</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RDBRST</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>AVPRE</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>AVPST</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRG</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRGB</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>ERASE</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BMRK</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRG_ERR</name>
                        <description>If set to 1, enables the Controller to generate an interrupt based on the corresponding bit in the FLCTL_IFG</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_CLRIFG</name>
                  <displayName>CLRIFG</displayName>
                  <description>Clear Interrupt Flag Register</description>
                  <addressOffset>0xF8</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RDBRST</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AVPRE</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AVPST</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>PRG</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>PRGB</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>ERASE</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>BMRK</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>PRG_ERR</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_SETIFG</name>
                  <displayName>SETIFG</displayName>
                  <description>Set Interrupt Flag Register</description>
                  <addressOffset>0xFC</addressOffset>
                  <size>32</size>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RDBRST</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AVPRE</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>AVPST</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>PRG</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>PRGB</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>ERASE</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>BMRK</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>PRG_ERR</name>
                        <description>Write 1 clears the corresponding interrupt flag bit in the FLCTL_IFG</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_READ_TIMCTL</name>
                  <displayName>READ_TIMCTL</displayName>
                  <description>Read Timing Control Register</description>
                  <addressOffset>0x100</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SETUP</name>
                        <description>Configures the length of the Setup phase for this operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>IREF_BOOST1</name>
                        <description>Length of the IREF_BOOST1 signal of the IP</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SETUP_LONG</name>
                        <description>Length of the Setup time into read mode when the device is recovering from one of the following conditions: Moving from Power-down or Standby back to Active and device is not trimmed. Moving from standby to active state in low-frequency active mode. Recovering from the LDO Boost operation after a Mass Erase.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_READMARGIN_TIMCTL</name>
                  <displayName>READMARGIN_TIMCTL</displayName>
                  <description>Read Margin Timing Control Register</description>
                  <addressOffset>0x104</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SETUP</name>
                        <description>Length of the Setup phase for this operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PRGVER_TIMCTL</name>
                  <displayName>PRGVER_TIMCTL</displayName>
                  <description>Program Verify Timing Control Register</description>
                  <addressOffset>0x108</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SETUP</name>
                        <description>Length of the Setup phase for this operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ACTIVE</name>
                        <description>Length of the Active phase for this operation</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>HOLD</name>
                        <description>Length of the Hold phase for this operation</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_ERSVER_TIMCTL</name>
                  <displayName>ERSVER_TIMCTL</displayName>
                  <description>Erase Verify Timing Control Register</description>
                  <addressOffset>0x10C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SETUP</name>
                        <description>Length of the Setup phase for this operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_LKGVER_TIMCTL</name>
                  <displayName>LKGVER_TIMCTL</displayName>
                  <description>Leakage Verify Timing Control Register</description>
                  <addressOffset>0x110</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SETUP</name>
                        <description>Length of the Setup phase for this operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_PROGRAM_TIMCTL</name>
                  <displayName>PROGRAM_TIMCTL</displayName>
                  <description>Program Timing Control Register</description>
                  <addressOffset>0x114</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SETUP</name>
                        <description>Length of the Setup phase for this operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ACTIVE</name>
                        <description>Length of the Active phase for this operation</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x14</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>HOLD</name>
                        <description>Length of the Hold phase for this operation</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_ERASE_TIMCTL</name>
                  <displayName>ERASE_TIMCTL</displayName>
                  <description>Erase Timing Control Register</description>
                  <addressOffset>0x118</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SETUP</name>
                        <description>Length of the Setup phase for this operation</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ACTIVE</name>
                        <description>Length of the Active phase for this operation</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x14</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>HOLD</name>
                        <description>Length of the Hold phase for this operation</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_MASSERASE_TIMCTL</name>
                  <displayName>MASSERASE_TIMCTL</displayName>
                  <description>Mass Erase Timing Control Register</description>
                  <addressOffset>0x11C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>BOOST_ACTIVE</name>
                        <description>Length of the time for which LDO Boost Signal is kept active</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>BOOST_HOLD</name>
                        <description>Length for which Flash deactivates the LDO Boost signal before processing any new commands</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FLCTL_BURSTPRG_TIMCTL</name>
                  <displayName>BURSTPRG_TIMCTL</displayName>
                  <description>Burst Program Timing Control Register</description>
                  <addressOffset>0x120</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>ACTIVE</name>
                        <description>Length of the Active phase for this operation</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x14</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>ADC14</name>
        <version>356.0</version>
        <description>ADC14</description>
        <baseAddress>0x40012000</baseAddress>
        <interrupt>
            <name>ADC14_IRQ</name>
            <description>ADC14 Interrupt</description>
            <value>24</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x158</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>ADC14CTL0</name>
                  <displayName>CTL0</displayName>
                  <description>Control 0 Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14SC</name>
                        <description>ADC14 start conversion</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14SC_0</name>
                                <description>No sample-and-conversion-start</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SC_1</name>
                                <description>Start sample-and-conversion</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14ENC</name>
                        <description>ADC14 enable conversion</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14ENC_0</name>
                                <description>ADC14 disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14ENC_1</name>
                                <description>ADC14 enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14ON</name>
                        <description>ADC14 on</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14ON_0</name>
                                <description>ADC14 off</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14ON_1</name>
                                <description>ADC14 on. ADC core is ready to power up when a valid conversion is triggered.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14MSC</name>
                        <description>ADC14 multiple sample and conversion</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14MSC_0</name>
                                <description>The sampling timer requires a rising edge of the SHI signal to trigger each sample-and-convert</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14MSC_1</name>
                                <description>The first rising edge of the SHI signal triggers the sampling timer, but further sample-and-conversions are performed automatically as soon as the prior conversion is completed</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14SHT0</name>
                        <description>ADC14 sample-and-hold time</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14SHT0_0</name>
                                <description>4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT0_1</name>
                                <description>8</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT0_2</name>
                                <description>16</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT0_3</name>
                                <description>32</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT0_4</name>
                                <description>64</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT0_5</name>
                                <description>96</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT0_6</name>
                                <description>128</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT0_7</name>
                                <description>192</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14SHT1</name>
                        <description>ADC14 sample-and-hold time</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14SHT1_0</name>
                                <description>4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT1_1</name>
                                <description>8</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT1_2</name>
                                <description>16</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT1_3</name>
                                <description>32</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT1_4</name>
                                <description>64</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT1_5</name>
                                <description>96</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT1_6</name>
                                <description>128</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHT1_7</name>
                                <description>192</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14BUSY</name>
                        <description>ADC14 busy</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14BUSY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14BUSY_0</name>
                                <description>No operation is active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14BUSY_1</name>
                                <description>A sequence, sample, or conversion is active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14CONSEQ</name>
                        <description>ADC14 conversion sequence mode select</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14CONSEQ_0</name>
                                <description>Single-channel, single-conversion</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14CONSEQ_1</name>
                                <description>Sequence-of-channels</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14CONSEQ_2</name>
                                <description>Repeat-single-channel</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14CONSEQ_3</name>
                                <description>Repeat-sequence-of-channels</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14SSEL</name>
                        <description>ADC14 clock source select</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14SSEL_0</name>
                                <description>MODCLK</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SSEL_1</name>
                                <description>SYSCLK</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SSEL_2</name>
                                <description>ACLK</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SSEL_3</name>
                                <description>MCLK</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SSEL_4</name>
                                <description>SMCLK</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SSEL_5</name>
                                <description>HSMCLK</description>
                                <value>5</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14DIV</name>
                        <description>ADC14 clock divider</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14DIV_0</name>
                                <description>/1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIV_1</name>
                                <description>/2</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIV_2</name>
                                <description>/3</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIV_3</name>
                                <description>/4</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIV_4</name>
                                <description>/5</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIV_5</name>
                                <description>/6</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIV_6</name>
                                <description>/7</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIV_7</name>
                                <description>/8</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14ISSH</name>
                        <description>ADC14 invert signal sample-and-hold</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14ISSH_0</name>
                                <description>The sample-input signal is not inverted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14ISSH_1</name>
                                <description>The sample-input signal is inverted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14SHP</name>
                        <description>ADC14 sample-and-hold pulse-mode select</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14SHP_0</name>
                                <description>SAMPCON signal is sourced from the sample-input signal</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHP_1</name>
                                <description>SAMPCON signal is sourced from the sampling timer</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14SHS</name>
                        <description>ADC14 sample-and-hold source select</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14SHS_0</name>
                                <description>ADC14SC bit</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHS_1</name>
                                <description>See device-specific data sheet for source</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHS_2</name>
                                <description>See device-specific data sheet for source</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHS_3</name>
                                <description>See device-specific data sheet for source</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHS_4</name>
                                <description>See device-specific data sheet for source</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHS_5</name>
                                <description>See device-specific data sheet for source</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHS_6</name>
                                <description>See device-specific data sheet for source</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14SHS_7</name>
                                <description>See device-specific data sheet for source</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14PDIV</name>
                        <description>ADC14 predivider</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14PDIV_0</name>
                                <description>Predivide by 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14PDIV_1</name>
                                <description>Predivide by 4</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14PDIV_2</name>
                                <description>Predivide by 32</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14PDIV_3</name>
                                <description>Predivide by 64</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14CTL1</name>
                  <displayName>CTL1</displayName>
                  <description>Control 1 Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000030</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14PWRMD</name>
                        <description>ADC14 power modes</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14PWRMD_0</name>
                                <description>Regular power mode for use with any resolution setting. Sample rate can be up to 1 Msps.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14PWRMD_2</name>
                                <description>Low-power mode for 12-bit, 10-bit, and 8-bit resolution settings. Sample rate must not exceed 200 ksps.</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14REFBURST</name>
                        <description>ADC14 reference buffer burst</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14REFBURST_0</name>
                                <description>ADC reference buffer on continuously</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14REFBURST_1</name>
                                <description>ADC reference buffer on only during sample-and-conversion</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14DF</name>
                        <description>ADC14 data read-back format</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14DF_0</name>
                                <description>Binary unsigned. Theoretically, for ADC14DIF = 0 and 14-bit mode, the analog input voltage - V(REF) results in 0000h, and the analog input voltage + V(REF) results in 3FFFh</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DF_1</name>
                                <description>Signed binary (2s complement), left aligned. Theoretically, for ADC14DIF = 0 and 14-bit mode, the analog input voltage - V(REF) results in 8000h, and the analog input voltage + V(REF) results in 7FFCh</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14RES</name>
                        <description>ADC14 resolution</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14RES_0</name>
                                <description>8 bit (9 clock cycle conversion time)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14RES_1</name>
                                <description>10 bit (11 clock cycle conversion time)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14RES_2</name>
                                <description>12 bit (14 clock cycle conversion time)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14RES_3</name>
                                <description>14 bit (16 clock cycle conversion time)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14CSTARTADD</name>
                        <description>ADC14 conversion start address</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>ADC14BATMAP</name>
                        <description>Controls 1/2 AVCC ADC input channel selection</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14BATMAP_0</name>
                                <description>ADC internal 1/2 x AVCC channel is not selected for ADC</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14BATMAP_1</name>
                                <description>ADC internal 1/2 x AVCC channel is selected for ADC input channel MAX</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14TCMAP</name>
                        <description>Controls temperature sensor ADC input channel selection</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14TCMAP_0</name>
                                <description>ADC internal temperature sensor channel is not selected for ADC</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14TCMAP_1</name>
                                <description>ADC internal temperature sensor channel is selected for ADC input channel MAX-1</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14CH0MAP</name>
                        <description>Controls internal channel 0 selection to ADC input channel MAX-2</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14CH0MAP_0</name>
                                <description>ADC input channel internal 0 is not selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14CH0MAP_1</name>
                                <description>ADC input channel internal 0 is selected for ADC input channel MAX-2</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14CH1MAP</name>
                        <description>Controls internal channel 1 selection to ADC input channel MAX-3</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14CH1MAP_0</name>
                                <description>ADC input channel internal 1 is not selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14CH1MAP_1</name>
                                <description>ADC input channel internal 1 is selected for ADC input channel MAX-3</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14CH2MAP</name>
                        <description>Controls internal channel 2 selection to ADC input channel MAX-4</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14CH2MAP_0</name>
                                <description>ADC input channel internal 2 is not selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14CH2MAP_1</name>
                                <description>ADC input channel internal 2 is selected for ADC input channel MAX-4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14CH3MAP</name>
                        <description>Controls internal channel 3 selection to ADC input channel MAX-5</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14CH3MAP_0</name>
                                <description>ADC input channel internal 3 is not selected</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14CH3MAP_1</name>
                                <description>ADC input channel internal 3 is selected for ADC input channel MAX-5</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14LO0</name>
                  <displayName>LO0</displayName>
                  <description>Window Comparator Low Threshold 0 Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14LO0</name>
                        <description>Low threshold 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14HI0</name>
                  <displayName>HI0</displayName>
                  <description>Window Comparator High Threshold 0 Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00003fff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14HI0</name>
                        <description>High threshold 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14LO1</name>
                  <displayName>LO1</displayName>
                  <description>Window Comparator Low Threshold 1 Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14LO1</name>
                        <description>Low threshold 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14HI1</name>
                  <displayName>HI1</displayName>
                  <description>Window Comparator High Threshold 1 Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00003fff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14HI1</name>
                        <description>High threshold 1</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>32</dim>
                  <dimIncrement>4</dimIncrement>
                  <dimIndex>0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31</dimIndex>
                  <name>ADC14MCTL[%s]</name>
                  <displayName>MCTL[%s]</displayName>
                  <description>Conversion Memory Control Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14INCH</name>
                        <description>Input channel select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14INCH_0</name>
                                <description>If ADC14DIF = 0: A0; If ADC14DIF = 1: Ain+ = A0, Ain- = A1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_1</name>
                                <description>If ADC14DIF = 0: A1; If ADC14DIF = 1: Ain+ = A0, Ain- = A1</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_2</name>
                                <description>If ADC14DIF = 0: A2; If ADC14DIF = 1: Ain+ = A2, Ain- = A3</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_3</name>
                                <description>If ADC14DIF = 0: A3; If ADC14DIF = 1: Ain+ = A2, Ain- = A3</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_4</name>
                                <description>If ADC14DIF = 0: A4; If ADC14DIF = 1: Ain+ = A4, Ain- = A5</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_5</name>
                                <description>If ADC14DIF = 0: A5; If ADC14DIF = 1: Ain+ = A4, Ain- = A5</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_6</name>
                                <description>If ADC14DIF = 0: A6; If ADC14DIF = 1: Ain+ = A6, Ain- = A7</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_7</name>
                                <description>If ADC14DIF = 0: A7; If ADC14DIF = 1: Ain+ = A6, Ain- = A7</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_8</name>
                                <description>If ADC14DIF = 0: A8; If ADC14DIF = 1: Ain+ = A8, Ain- = A9</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_9</name>
                                <description>If ADC14DIF = 0: A9; If ADC14DIF = 1: Ain+ = A8, Ain- = A9</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_10</name>
                                <description>If ADC14DIF = 0: A10; If ADC14DIF = 1: Ain+ = A10, Ain- = A11</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_11</name>
                                <description>If ADC14DIF = 0: A11; If ADC14DIF = 1: Ain+ = A10, Ain- = A11</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_12</name>
                                <description>If ADC14DIF = 0: A12; If ADC14DIF = 1: Ain+ = A12, Ain- = A13</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_13</name>
                                <description>If ADC14DIF = 0: A13; If ADC14DIF = 1: Ain+ = A12, Ain- = A13</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_14</name>
                                <description>If ADC14DIF = 0: A14; If ADC14DIF = 1: Ain+ = A14, Ain- = A15</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_15</name>
                                <description>If ADC14DIF = 0: A15; If ADC14DIF = 1: Ain+ = A14, Ain- = A15</description>
                                <value>15</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_16</name>
                                <description>If ADC14DIF = 0: A16; If ADC14DIF = 1: Ain+ = A16, Ain- = A17</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_17</name>
                                <description>If ADC14DIF = 0: A17; If ADC14DIF = 1: Ain+ = A16, Ain- = A17</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_18</name>
                                <description>If ADC14DIF = 0: A18; If ADC14DIF = 1: Ain+ = A18, Ain- = A19</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_19</name>
                                <description>If ADC14DIF = 0: A19; If ADC14DIF = 1: Ain+ = A18, Ain- = A19</description>
                                <value>19</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_20</name>
                                <description>If ADC14DIF = 0: A20; If ADC14DIF = 1: Ain+ = A20, Ain- = A21</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_21</name>
                                <description>If ADC14DIF = 0: A21; If ADC14DIF = 1: Ain+ = A20, Ain- = A21</description>
                                <value>21</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_22</name>
                                <description>If ADC14DIF = 0: A22; If ADC14DIF = 1: Ain+ = A22, Ain- = A23</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_23</name>
                                <description>If ADC14DIF = 0: A23; If ADC14DIF = 1: Ain+ = A22, Ain- = A23</description>
                                <value>23</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_24</name>
                                <description>If ADC14DIF = 0: A24; If ADC14DIF = 1: Ain+ = A24, Ain- = A25</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_25</name>
                                <description>If ADC14DIF = 0: A25; If ADC14DIF = 1: Ain+ = A24, Ain- = A25</description>
                                <value>25</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_26</name>
                                <description>If ADC14DIF = 0: A26; If ADC14DIF = 1: Ain+ = A26, Ain- = A27</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_27</name>
                                <description>If ADC14DIF = 0: A27; If ADC14DIF = 1: Ain+ = A26, Ain- = A27</description>
                                <value>27</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_28</name>
                                <description>If ADC14DIF = 0: A28; If ADC14DIF = 1: Ain+ = A28, Ain- = A29</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_29</name>
                                <description>If ADC14DIF = 0: A29; If ADC14DIF = 1: Ain+ = A28, Ain- = A29</description>
                                <value>29</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_30</name>
                                <description>If ADC14DIF = 0: A30; If ADC14DIF = 1: Ain+ = A30, Ain- = A31</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INCH_31</name>
                                <description>If ADC14DIF = 0: A31; If ADC14DIF = 1: Ain+ = A30, Ain- = A31</description>
                                <value>31</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14EOS</name>
                        <description>End of sequence</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14EOS_0</name>
                                <description>Not end of sequence</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14EOS_1</name>
                                <description>End of sequence</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14VRSEL</name>
                        <description>Selects combinations of V(R+) and V(R-) sources</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14VRSEL_0</name>
                                <description>V(R+) = AVCC, V(R-) = AVSS</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14VRSEL_1</name>
                                <description>V(R+) = VREF buffered, V(R-) = AVSS</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14VRSEL_14</name>
                                <description>V(R+) = VeREF+, V(R-) = VeREF-</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14VRSEL_15</name>
                                <description>V(R+) = VeREF+ buffered, V(R-) = VeREF</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14DIF</name>
                        <description>Differential mode</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14DIF_0</name>
                                <description>Single-ended mode enabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14DIF_1</name>
                                <description>Differential mode enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14WINC</name>
                        <description>Comparator window enable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14WINC_0</name>
                                <description>Comparator window disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14WINC_1</name>
                                <description>Comparator window enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14WINCTH</name>
                        <description>Window comparator threshold register selection</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14WINCTH_0</name>
                                <description>Use window comparator thresholds 0, ADC14LO0 and ADC14HI0</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14WINCTH_1</name>
                                <description>Use window comparator thresholds 1, ADC14LO1 and ADC14HI1</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>32</dim>
                  <dimIncrement>4</dimIncrement>
                  <dimIndex>0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31</dimIndex>
                  <name>ADC14MEM[%s]</name>
                  <displayName>MEM[%s]</displayName>
                  <description>Conversion Memory Register</description>
                  <addressOffset>0x98</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000000</resetMask>
                  <fields>
                    <field>
                        <name>Conversion_Results</name>
                        <description>Conversion Result</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14IER0</name>
                  <displayName>IER0</displayName>
                  <description>Interrupt Enable 0 Register</description>
                  <addressOffset>0x13C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14IE0</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE0_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE0_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE1</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE1_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE1_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE2</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE2_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE2_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE3</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE3_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE3_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE4</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE4_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE4_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE5</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE5_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE5_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE6</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE6_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE6_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE7</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE7_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE7_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE8</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE8_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE8_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE9</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE9_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE9_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE10</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE10_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE10_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE11</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE11_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE11_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE12</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE12_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE12_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE13</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE13_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE13_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE14</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE14_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE14_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE15</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE15_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE15_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE16</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE16_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE16_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE17</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE17_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE17_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE19</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE19_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE19_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE18</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE18_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE18_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE20</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE20_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE20_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE21</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE21_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE21_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE22</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE22_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE22_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE23</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE23_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE23_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE24</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE24_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE24_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE25</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE25_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE25_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE26</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE26_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE26_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE27</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE27_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE27_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE28</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE28_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE28_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE29</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE29_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE29_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE30</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE30_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE30_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IE31</name>
                        <description>Interrupt enable</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IE31_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IE31_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14IER1</name>
                  <displayName>IER1</displayName>
                  <description>Interrupt Enable 1 Register</description>
                  <addressOffset>0x140</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14INIE</name>
                        <description>Interrupt enable for ADC14MEMx within comparator window</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14INIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14LOIE</name>
                        <description>Interrupt enable for ADC14MEMx below comparator window</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14LOIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14LOIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14HIIE</name>
                        <description>Interrupt enable for ADC14MEMx above comparator window</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14HIIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14HIIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14OVIE</name>
                        <description>ADC14MEMx overflow-interrupt enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14OVIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14OVIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14TOVIE</name>
                        <description>ADC14 conversion-time-overflow interrupt enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14TOVIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14TOVIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14RDYIE</name>
                        <description>ADC14 local buffered reference ready interrupt enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14RDYIE_0</name>
                                <description>Interrupt disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14RDYIE_1</name>
                                <description>Interrupt enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14IFGR0</name>
                  <displayName>IFGR0</displayName>
                  <description>Interrupt Flag 0 Register</description>
                  <addressOffset>0x144</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14IFG0</name>
                        <description>ADC14MEM0 interrupt flag</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG0_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG0_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG0_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG1</name>
                        <description>ADC14MEM1 interrupt flag</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG1_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG1_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG1_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG2</name>
                        <description>ADC14MEM2 interrupt flag</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG2_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG2_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG2_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG3</name>
                        <description>ADC14MEM3 interrupt flag</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG3_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG3_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG3_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG4</name>
                        <description>ADC14MEM4 interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG4_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG4_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG4_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG5</name>
                        <description>ADC14MEM5 interrupt flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG5_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG5_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG5_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG6</name>
                        <description>ADC14MEM6 interrupt flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG6_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG6_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG6_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG7</name>
                        <description>ADC14MEM7 interrupt flag</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG7_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG7_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG7_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG8</name>
                        <description>ADC14MEM8 interrupt flag</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG8_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG8_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG8_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG9</name>
                        <description>ADC14MEM9 interrupt flag</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG9_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG9_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG9_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG10</name>
                        <description>ADC14MEM10 interrupt flag</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG10_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG10_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG10_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG11</name>
                        <description>ADC14MEM11 interrupt flag</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG11_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG11_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG11_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG12</name>
                        <description>ADC14MEM12 interrupt flag</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG12_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG12_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG12_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG13</name>
                        <description>ADC14MEM13 interrupt flag</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG13_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG13_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG13_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG14</name>
                        <description>ADC14MEM14 interrupt flag</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG14_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG14_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG14_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG15</name>
                        <description>ADC14MEM15 interrupt flag</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG15_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG15_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG15_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG16</name>
                        <description>ADC14MEM16 interrupt flag</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG16_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG16_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG16_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG17</name>
                        <description>ADC14MEM17 interrupt flag</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG17_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG17_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG17_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG18</name>
                        <description>ADC14MEM18 interrupt flag</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG18_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG18_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG18_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG19</name>
                        <description>ADC14MEM19 interrupt flag</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG19_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG19_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG19_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG20</name>
                        <description>ADC14MEM20 interrupt flag</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG20_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG20_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG20_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG21</name>
                        <description>ADC14MEM21 interrupt flag</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG21_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG21_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG21_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG22</name>
                        <description>ADC14MEM22 interrupt flag</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG22_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG22_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG22_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG23</name>
                        <description>ADC14MEM23 interrupt flag</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG23_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG23_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG23_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG24</name>
                        <description>ADC14MEM24 interrupt flag</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG24_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG24_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG24_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG25</name>
                        <description>ADC14MEM25 interrupt flag</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG25_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG25_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG25_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG26</name>
                        <description>ADC14MEM26 interrupt flag</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG26_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG26_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG26_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG27</name>
                        <description>ADC14MEM27 interrupt flag</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG27_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG27_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG27_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG28</name>
                        <description>ADC14MEM28 interrupt flag</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG28_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG28_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG28_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG29</name>
                        <description>ADC14MEM29 interrupt flag</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG29_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG29_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG29_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG30</name>
                        <description>ADC14MEM30 interrupt flag</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG30_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG30_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG30_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14IFG31</name>
                        <description>ADC14MEM31 interrupt flag</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14IFG31_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14IFG31_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IFG31_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14IFGR1</name>
                  <displayName>IFGR1</displayName>
                  <description>Interrupt Flag 1 Register</description>
                  <addressOffset>0x148</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14INIFG</name>
                        <description>Interrupt flag for ADC14MEMx within comparator window</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14INIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14INIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14INIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14LOIFG</name>
                        <description>Interrupt flag for ADC14MEMx below comparator window</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14LOIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14LOIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14LOIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14HIIFG</name>
                        <description>Interrupt flag for ADC14MEMx above comparator window</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14HIIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14HIIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14HIIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14OVIFG</name>
                        <description>ADC14MEMx overflow interrupt flag</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14OVIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14OVIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14OVIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14TOVIFG</name>
                        <description>ADC14 conversion time overflow interrupt flag</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14TOVIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14TOVIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14TOVIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADC14RDYIFG</name>
                        <description>ADC14 local buffered reference ready interrupt flag</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>ADC14RDYIFG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>ADC14RDYIFG_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14RDYIFG_1</name>
                                <description>Interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14CLRIFGR0</name>
                  <displayName>CLRIFGR0</displayName>
                  <description>Clear Interrupt Flag 0 Register</description>
                  <addressOffset>0x14C</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLRADC14IFG0</name>
                        <description>clear ADC14IFG0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG0_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG0_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG0_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG1</name>
                        <description>clear ADC14IFG1</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG1_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG1_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG1_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG2</name>
                        <description>clear ADC14IFG2</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG2_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG2_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG2_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG3</name>
                        <description>clear ADC14IFG3</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG3_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG3_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG3_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG4</name>
                        <description>clear ADC14IFG4</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG4_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG4_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG4_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG5</name>
                        <description>clear ADC14IFG5</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG5_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG5_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG5_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG6</name>
                        <description>clear ADC14IFG6</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG6_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG6_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG6_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG7</name>
                        <description>clear ADC14IFG7</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG7_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG7_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG7_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG8</name>
                        <description>clear ADC14IFG8</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG8_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG8_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG8_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG9</name>
                        <description>clear ADC14IFG9</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG9_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG9_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG9_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG10</name>
                        <description>clear ADC14IFG10</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG10_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG10_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG10_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG11</name>
                        <description>clear ADC14IFG11</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG11_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG11_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG11_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG12</name>
                        <description>clear ADC14IFG12</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG12_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG12_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG12_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG13</name>
                        <description>clear ADC14IFG13</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG13_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG13_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG13_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG14</name>
                        <description>clear ADC14IFG14</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG14_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG14_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG14_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG15</name>
                        <description>clear ADC14IFG15</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG15_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG15_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG15_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG16</name>
                        <description>clear ADC14IFG16</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG16_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG16_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG16_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG17</name>
                        <description>clear ADC14IFG17</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG17_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG17_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG17_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG18</name>
                        <description>clear ADC14IFG18</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG18_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG18_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG18_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG19</name>
                        <description>clear ADC14IFG19</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG19_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG19_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG19_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG20</name>
                        <description>clear ADC14IFG20</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG20_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG20_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG20_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG21</name>
                        <description>clear ADC14IFG21</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG21_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG21_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG21_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG22</name>
                        <description>clear ADC14IFG22</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG22_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG22_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG22_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG23</name>
                        <description>clear ADC14IFG23</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG23_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG23_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG23_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG24</name>
                        <description>clear ADC14IFG24</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG24_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG24_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG24_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG25</name>
                        <description>clear ADC14IFG25</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG25_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG25_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG25_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG26</name>
                        <description>clear ADC14IFG26</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG26_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG26_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG26_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG27</name>
                        <description>clear ADC14IFG27</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG27_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG27_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG27_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG28</name>
                        <description>clear ADC14IFG28</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG28_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG28_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG28_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG29</name>
                        <description>clear ADC14IFG29</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG29_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG29_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG29_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG30</name>
                        <description>clear ADC14IFG30</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG30_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG30_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG30_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14IFG31</name>
                        <description>clear ADC14IFG31</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14IFG31_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14IFG31_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14IFG31_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14CLRIFGR1</name>
                  <displayName>CLRIFGR1</displayName>
                  <description>Clear Interrupt Flag 1 Register</description>
                  <addressOffset>0x150</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLRADC14INIFG</name>
                        <description>clear ADC14INIFG</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14INIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14INIFG_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14INIFG_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14LOIFG</name>
                        <description>clear ADC14LOIFG</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14LOIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14LOIFG_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14LOIFG_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14HIIFG</name>
                        <description>clear ADC14HIIFG</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14HIIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14HIIFG_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14HIIFG_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14OVIFG</name>
                        <description>clear ADC14OVIFG</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14OVIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14OVIFG_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14OVIFG_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14TOVIFG</name>
                        <description>clear ADC14TOVIFG</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14TOVIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14TOVIFG_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14TOVIFG_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLRADC14RDYIFG</name>
                        <description>clear ADC14RDYIFG</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <name>CLRADC14RDYIFG_enum_write</name>
                            <usage>write</usage>
                            <enumeratedValue>
                                <name>CLRADC14RDYIFG_0</name>
                                <description>no effect</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CLRADC14RDYIFG_1</name>
                                <description>clear pending interrupt flag</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ADC14IV</name>
                  <displayName>IV</displayName>
                  <description>Interrupt Vector Register</description>
                  <addressOffset>0x154</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ADC14IV</name>
                        <description>ADC14 interrupt vector value</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>ADC14IV_0</name>
                                <description>No interrupt pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_2</name>
                                <description>Interrupt Source: ADC14MEMx overflow; Interrupt Flag: ADC14OVIFG; Interrupt Priority: Highest</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_4</name>
                                <description>Interrupt Source: Conversion time overflow; Interrupt Flag: ADC14TOVIFG</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_6</name>
                                <description>Interrupt Source: ADC14 window high interrupt flag; Interrupt Flag: ADC14HIIFG</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_8</name>
                                <description>Interrupt Source: ADC14 window low interrupt flag; Interrupt Flag: ADC14LOIFG</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_10</name>
                                <description>Interrupt Source: ADC14 in-window interrupt flag; Interrupt Flag: ADC14INIFG</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_12</name>
                                <description>Interrupt Source: ADC14MEM0 interrupt flag; Interrupt Flag: ADC14IFG0</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_14</name>
                                <description>Interrupt Source: ADC14MEM1 interrupt flag; Interrupt Flag: ADC14IFG1</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_16</name>
                                <description>Interrupt Source: ADC14MEM2 interrupt flag; Interrupt Flag: ADC14IFG2</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_18</name>
                                <description>Interrupt Source: ADC14MEM3 interrupt flag; Interrupt Flag: ADC14IFG3</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_20</name>
                                <description>Interrupt Source: ADC14MEM4 interrupt flag; Interrupt Flag: ADC14IFG4</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_22</name>
                                <description>Interrupt Source: ADC14MEM5 interrupt flag; Interrupt Flag: ADC14IFG5</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_24</name>
                                <description>Interrupt Source: ADC14MEM6 interrupt flag; Interrupt Flag: ADC14IFG6</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_26</name>
                                <description>Interrupt Source: ADC14MEM7 interrupt flag; Interrupt Flag: ADC14IFG7</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_28</name>
                                <description>Interrupt Source: ADC14MEM8 interrupt flag; Interrupt Flag: ADC14IFG8</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_30</name>
                                <description>Interrupt Source: ADC14MEM9 interrupt flag; Interrupt Flag: ADC14IFG9</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_32</name>
                                <description>Interrupt Source: ADC14MEM10 interrupt flag; Interrupt Flag: ADC14IFG10</description>
                                <value>32</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_34</name>
                                <description>Interrupt Source: ADC14MEM11 interrupt flag; Interrupt Flag: ADC14IFG11</description>
                                <value>34</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_36</name>
                                <description>Interrupt Source: ADC14MEM12 interrupt flag; Interrupt Flag: ADC14IFG12</description>
                                <value>36</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_38</name>
                                <description>Interrupt Source: ADC14MEM13 interrupt flag; Interrupt Flag: ADC14IFG13</description>
                                <value>38</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_40</name>
                                <description>Interrupt Source: ADC14MEM14 interrupt flag; Interrupt Flag: ADC14IFG14</description>
                                <value>40</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_42</name>
                                <description>Interrupt Source: ADC14MEM15 interrupt flag; Interrupt Flag: ADC14IFG15</description>
                                <value>42</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_44</name>
                                <description>Interrupt Source: ADC14MEM16 interrupt flag; Interrupt Flag: ADC14IFG16</description>
                                <value>44</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_46</name>
                                <description>Interrupt Source: ADC14MEM17 interrupt flag; Interrupt Flag: ADC14IFG17</description>
                                <value>46</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_48</name>
                                <description>Interrupt Source: ADC14MEM18 interrupt flag; Interrupt Flag: ADC14IFG18</description>
                                <value>48</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_50</name>
                                <description>Interrupt Source: ADC14MEM19 interrupt flag; Interrupt Flag: ADC14IFG19</description>
                                <value>50</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_52</name>
                                <description>Interrupt Source: ADC14MEM20 interrupt flag; Interrupt Flag: ADC14IFG20</description>
                                <value>52</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_54</name>
                                <description>Interrupt Source: ADC14MEM22 interrupt flag; Interrupt Flag: ADC14IFG22</description>
                                <value>54</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_56</name>
                                <description>Interrupt Source: ADC14MEM22 interrupt flag; Interrupt Flag: ADC14IFG22</description>
                                <value>56</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_58</name>
                                <description>Interrupt Source: ADC14MEM23 interrupt flag; Interrupt Flag: ADC14IFG23</description>
                                <value>58</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_60</name>
                                <description>Interrupt Source: ADC14MEM24 interrupt flag; Interrupt Flag: ADC14IFG24</description>
                                <value>60</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_62</name>
                                <description>Interrupt Source: ADC14MEM25 interrupt flag; Interrupt Flag: ADC14IFG25</description>
                                <value>62</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_64</name>
                                <description>Interrupt Source: ADC14MEM26 interrupt flag; Interrupt Flag: ADC14IFG26</description>
                                <value>64</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_66</name>
                                <description>Interrupt Source: ADC14MEM27 interrupt flag; Interrupt Flag: ADC14IFG27</description>
                                <value>66</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_68</name>
                                <description>Interrupt Source: ADC14MEM28 interrupt flag; Interrupt Flag: ADC14IFG28</description>
                                <value>68</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_70</name>
                                <description>Interrupt Source: ADC14MEM29 interrupt flag; Interrupt Flag: ADC14IFG29</description>
                                <value>70</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_72</name>
                                <description>Interrupt Source: ADC14MEM30 interrupt flag; Interrupt Flag: ADC14IFG30</description>
                                <value>72</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_74</name>
                                <description>Interrupt Source: ADC14MEM31 interrupt flag; Interrupt Flag: ADC14IFG31</description>
                                <value>74</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>ADC14IV_76</name>
                                <description>Interrupt Source: ADC14RDYIFG interrupt flag; Interrupt Flag: ADC14RDYIFG; Interrupt Priority: Lowest</description>
                                <value>76</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>ITM</name>
        <version>356.0</version>
        <description>ITM</description>
        <baseAddress>0xE0000000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>ITM_STIM0</name>
                  <displayName>STIM0</displayName>
                  <description>ITM Stimulus Port 0</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM1</name>
                  <displayName>STIM1</displayName>
                  <description>ITM Stimulus Port 1</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM2</name>
                  <displayName>STIM2</displayName>
                  <description>ITM Stimulus Port 2</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM3</name>
                  <displayName>STIM3</displayName>
                  <description>ITM Stimulus Port 3</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM4</name>
                  <displayName>STIM4</displayName>
                  <description>ITM Stimulus Port 4</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM5</name>
                  <displayName>STIM5</displayName>
                  <description>ITM Stimulus Port 5</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM6</name>
                  <displayName>STIM6</displayName>
                  <description>ITM Stimulus Port 6</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM7</name>
                  <displayName>STIM7</displayName>
                  <description>ITM Stimulus Port 7</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM8</name>
                  <displayName>STIM8</displayName>
                  <description>ITM Stimulus Port 8</description>
                  <addressOffset>0x20</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM9</name>
                  <displayName>STIM9</displayName>
                  <description>ITM Stimulus Port 9</description>
                  <addressOffset>0x24</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM10</name>
                  <displayName>STIM10</displayName>
                  <description>ITM Stimulus Port 10</description>
                  <addressOffset>0x28</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM11</name>
                  <displayName>STIM11</displayName>
                  <description>ITM Stimulus Port 11</description>
                  <addressOffset>0x2C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM12</name>
                  <displayName>STIM12</displayName>
                  <description>ITM Stimulus Port 12</description>
                  <addressOffset>0x30</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM13</name>
                  <displayName>STIM13</displayName>
                  <description>ITM Stimulus Port 13</description>
                  <addressOffset>0x34</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM14</name>
                  <displayName>STIM14</displayName>
                  <description>ITM Stimulus Port 14</description>
                  <addressOffset>0x38</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM15</name>
                  <displayName>STIM15</displayName>
                  <description>ITM Stimulus Port 15</description>
                  <addressOffset>0x3C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM16</name>
                  <displayName>STIM16</displayName>
                  <description>ITM Stimulus Port 16</description>
                  <addressOffset>0x40</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM17</name>
                  <displayName>STIM17</displayName>
                  <description>ITM Stimulus Port 17</description>
                  <addressOffset>0x44</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM18</name>
                  <displayName>STIM18</displayName>
                  <description>ITM Stimulus Port 18</description>
                  <addressOffset>0x48</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM19</name>
                  <displayName>STIM19</displayName>
                  <description>ITM Stimulus Port 19</description>
                  <addressOffset>0x4C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM20</name>
                  <displayName>STIM20</displayName>
                  <description>ITM Stimulus Port 20</description>
                  <addressOffset>0x50</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM21</name>
                  <displayName>STIM21</displayName>
                  <description>ITM Stimulus Port 21</description>
                  <addressOffset>0x54</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM22</name>
                  <displayName>STIM22</displayName>
                  <description>ITM Stimulus Port 22</description>
                  <addressOffset>0x58</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM23</name>
                  <displayName>STIM23</displayName>
                  <description>ITM Stimulus Port 23</description>
                  <addressOffset>0x5C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM24</name>
                  <displayName>STIM24</displayName>
                  <description>ITM Stimulus Port 24</description>
                  <addressOffset>0x60</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM25</name>
                  <displayName>STIM25</displayName>
                  <description>ITM Stimulus Port 25</description>
                  <addressOffset>0x64</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM26</name>
                  <displayName>STIM26</displayName>
                  <description>ITM Stimulus Port 26</description>
                  <addressOffset>0x68</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM27</name>
                  <displayName>STIM27</displayName>
                  <description>ITM Stimulus Port 27</description>
                  <addressOffset>0x6C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM28</name>
                  <displayName>STIM28</displayName>
                  <description>ITM Stimulus Port 28</description>
                  <addressOffset>0x70</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM29</name>
                  <displayName>STIM29</displayName>
                  <description>ITM Stimulus Port 29</description>
                  <addressOffset>0x74</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM30</name>
                  <displayName>STIM30</displayName>
                  <description>ITM Stimulus Port 30</description>
                  <addressOffset>0x78</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_STIM31</name>
                  <displayName>STIM31</displayName>
                  <description>ITM Stimulus Port 31</description>
                  <addressOffset>0x7C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>ITM_TER</name>
                  <displayName>TER</displayName>
                  <description>ITM Trace Enable Register</description>
                  <addressOffset>0xE00</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>STIMENA</name>
                        <description>Bit mask to enable tracing on ITM stimulus ports. One bit per stimulus port.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ITM_TPR</name>
                  <displayName>TPR</displayName>
                  <description>ITM Trace Privilege Register</description>
                  <addressOffset>0xE40</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRIVMASK</name>
                        <description>Bit mask to enable tracing on ITM stimulus ports: bit [0] = stimulus ports [7:0], bit [1] = stimulus ports [15:8], bit [2] = stimulus ports [23:16], bit [3] = stimulus ports [31:24].</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ITM_TCR</name>
                  <displayName>TCR</displayName>
                  <description>ITM Trace Control Register</description>
                  <addressOffset>0xE80</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>ITMENA</name>
                        <description>Enable ITM. This is the master enable, and must be set before ITM Stimulus and Trace Enable registers can be written.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>TSENA</name>
                        <description>Enables differential timestamps. Differential timestamps are emitted when a packet is written to the FIFO with a non-zero timestamp counter, and when the timestamp counter overflows. Timestamps are emitted during idle times after a fixed number of two million cycles. This provides a time reference for packets and inter-packet gaps. If SWOENA (bit [4]) is set, timestamps are triggered by activity on the internal trace bus only. In this case there is no regular timestamp output when the ITM is idle.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SYNCENA</name>
                        <description>Enables sync packets for TPIU.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DWTENA</name>
                        <description>Enables the DWT stimulus.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SWOENA</name>
                        <description>Enables asynchronous clocking of the timestamp counter.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>TSPRESCALE</name>
                        <description>TSPrescale Timestamp prescaler.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>no prescaling</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>divide by 4</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>divide by 16</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>divide by 64</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ATBID</name>
                        <description>ATB ID for CoreSight system.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x7</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BUSY</name>
                        <description>Set when ITM events present and being drained.</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ITM_IWR</name>
                  <displayName>IWR</displayName>
                  <description>ITM Integration Write Register</description>
                  <addressOffset>0xEF8</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>ATVALIDM</name>
                        <description>When the integration mode is set: 0 = ATVALIDM clear. 1 = ATVALIDM set.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>ATVALIDM clear</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>ATVALIDM set</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ITM_IMCR</name>
                  <displayName>IMCR</displayName>
                  <description>ITM Integration Mode Control Register</description>
                  <addressOffset>0xF00</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>INTEGRATION</name>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>ATVALIDM normal</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>ATVALIDM driven from Integration Write Register</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ITM_LAR</name>
                  <displayName>LAR</displayName>
                  <description>ITM Lock Access Register</description>
                  <addressOffset>0xFB0</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>LOCK_ACCESS</name>
                        <description>A privileged write of 0xC5ACCE55 enables more write access to Control Register 0xE00::0xFFC. An invalid write removes write access.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ITM_LSR</name>
                  <displayName>LSR</displayName>
                  <description>ITM Lock Status Register</description>
                  <addressOffset>0xFB4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000003</resetValue>
                  <fields>
                    <field>
                        <name>PRESENT</name>
                        <description>Indicates that a lock mechanism exists for this component.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ACCESS</name>
                        <description>Write access to component is blocked. All writes are ignored, reads are permitted.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>BYTEACC</name>
                        <description>You cannot implement 8-bit lock accesses.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>DWT</name>
        <version>356.0</version>
        <description>DWT</description>
        <baseAddress>0xE0001000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>DWT_CTRL</name>
                  <displayName>CTRL</displayName>
                  <description>DWT Control Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x40000000</resetValue>
                  <fields>
                    <field>
                        <name>CYCCNTENA</name>
                        <description>Enable the CYCCNT counter. If not enabled, the counter does not count and no event is generated for PS sampling or CYCCNTENA. In normal use, the debugger must initialize the CYCCNT counter to 0.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>POSTPRESET</name>
                        <description>Reload value for POSTCNT, bits [8:5], post-scalar counter. If this value is 0, events are triggered on each tap change (a power of 2). If this field has a non-0 value, this forms a count-down value, to be reloaded into POSTCNT each time it reaches 0. For example, a value 1 in this register means an event is formed every other tap change.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>POSTCNT</name>
                        <description>Post-scalar counter for CYCTAP. When the selected tapped bit changes from 0 to 1 or 1 to 0, the post scalar counter is down-counted when not 0. If 0, it triggers an event for PCSAMPLENA or CYCEVTENA use. It also reloads with the value from POSTPRESET (bits [4:1]).</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CYCTAP</name>
                        <description>Selects a tap on the DWT_CYCCNT register. These are spaced at bits [6] and [10]. When the selected bit in the CYCCNT register changes from 0 to 1 or 1 to 0, it emits into the POSTCNT, bits [8:5], post-scalar counter. That counter then counts down. On a bit change when post-scalar is 0, it triggers an event for PC sampling or CYCEVTCNT.</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>selects bit [6] to tap</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>selects bit [10] to tap.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SYNCTAP</name>
                        <description>Feeds a synchronization pulse to the ITM SYNCENA control. The value selected here picks the rate (approximately 1/second or less) by selecting a tap on the DWT_CYCCNT register. To use synchronization (heartbeat and hot-connect synchronization), CYCCNTENA must be set to 1, SYNCTAP must be set to one of its values, and SYNCENA must be set to 1.</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>Disabled. No synch counting.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>Tap at CYCCNT bit 24.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>Tap at CYCCNT bit 26.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>Tap at CYCCNT bit 28.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PCSAMPLEENA</name>
                        <description>Enables PC Sampling event. A PC sample event is emitted when the POSTCNT counter triggers it. See CYCTAP, bit [9], and POSTPRESET, bits [4:1], for details. Enabling this bit overrides CYCEVTENA (bit [20]). Reset clears the PCSAMPLENA bit.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>PC Sampling event disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Sampling event enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>EXCTRCENA</name>
                        <description>Enables Interrupt event tracing. Reset clears the EXCEVTENA bit.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>interrupt event trace disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>interrupt event trace enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CPIEVTENA</name>
                        <description>Enables CPI count event. Emits an event when DWT_CPICNT overflows (every 256 cycles of multi-cycle instructions). Reset clears the CPIEVTENA bit.</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>CPI counter events disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>CPI counter events enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>EXCEVTENA</name>
                        <description>Enables Interrupt overhead event. Emits an event when DWT_EXCCNT overflows (every 256 cycles of interrupt overhead). Reset clears the EXCEVTENA bit.</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Interrupt overhead event disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Interrupt overhead event enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SLEEPEVTENA</name>
                        <description>Enables Sleep count event. Emits an event when DWT_SLEEPCNT overflows (every 256 cycles that the processor is sleeping). Reset clears the SLEEPEVTENA bit.</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Sleep count events disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Sleep count events enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>LSUEVTENA</name>
                        <description>Enables LSU count event. Emits an event when DWT_LSUCNT overflows (every 256 cycles of LSU operation). LSU counts include all LSU costs after the initial cycle for the instruction. Reset clears the LSUEVTENA bit.</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>LSU count events disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>LSU count events enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>FOLDEVTENA</name>
                        <description>Enables Folded instruction count event. Emits an event when DWT_FOLDCNT overflows (every 256 cycles of folded instructions). A folded instruction is one that does not incur even one cycle to execute. For example, an IT instruction is folded away and so does not use up one cycle. Reset clears the FOLDEVTENA bit.</description>
                        <bitOffset>0x15</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Folded instruction count events disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Folded instruction count events enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CYCEVTENA</name>
                        <description>Enables Cycle count event. Emits an event when the POSTCNT counter triggers it. See CYCTAP (bit [9]) and POSTPRESET, bits [4:1], for details. This event is only emitted if PCSAMPLENA, bit [12], is disabled. PCSAMPLENA overrides the setting of this bit. Reset clears the CYCEVTENA bit.</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Cycle count events disabled.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Cycle count events enabled.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>NOPRFCNT</name>
                        <description>When set, DWT_FOLDCNT, DWT_LSUCNT, DWT_SLEEPCNT, DWT_EXCCNT, and DWT_CPICNT are not supported.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>NOCYCCNT</name>
                        <description>When set, DWT_CYCCNT is not supported.</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_CYCCNT</name>
                  <displayName>CYCCNT</displayName>
                  <description>DWT Current PC Sampler Cycle Count Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>CYCCNT</name>
                        <description>Current PC Sampler Cycle Counter count value. When enabled, this counter counts the number of core cycles, except when the core is halted. CYCCNT is a free running counter, counting upwards. It wraps around to 0 on overflow. The debugger must initialize this to 0 when first enabling.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_CPICNT</name>
                  <displayName>CPICNT</displayName>
                  <description>DWT CPI Count Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>CPICNT</name>
                        <description>Current CPI counter value. Increments on the additional cycles (the first cycle is not counted) required to execute all instructions except those recorded by DWT_LSUCNT. This counter also increments on all instruction fetch stalls. If CPIEVTENA is set, an event is emitted when the counter overflows. Clears to 0 on enabling.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_EXCCNT</name>
                  <displayName>EXCCNT</displayName>
                  <description>DWT Exception Overhead Count Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>EXCCNT</name>
                        <description>Current interrupt overhead counter value. Counts the total cycles spent in interrupt processing (for example entry stacking, return unstacking, pre-emption). An event is emitted on counter overflow (every 256 cycles). This counter initializes to 0 when enabled. Clears to 0 on enabling.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_SLEEPCNT</name>
                  <displayName>SLEEPCNT</displayName>
                  <description>DWT Sleep Count Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>SLEEPCNT</name>
                        <description>Sleep counter. Counts the number of cycles during which the processor is sleeping. An event is emitted on counter overflow (every 256 cycles). This counter initializes to 0 when enabled. Note that SLEEPCNT is clocked using FCLK. It is possible that the frequency of FCLK might be reduced while the processor is sleeping to minimize power consumption. This means that sleep duration must be calculated with the frequency of FCLK during sleep.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_LSUCNT</name>
                  <displayName>LSUCNT</displayName>
                  <description>DWT LSU Count Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>LSUCNT</name>
                        <description>LSU counter. This counts the total number of cycles that the processor is processing an LSU operation. The initial execution cost of the instruction is not counted. For example, an LDR that takes two cycles to complete increments this counter one cycle. Equivalently, an LDR that stalls for two cycles (and so takes four cycles), increments this counter three times. An event is emitted on counter overflow (every 256 cycles). Clears to 0 on enabling.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_FOLDCNT</name>
                  <displayName>FOLDCNT</displayName>
                  <description>DWT Fold Count Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>FOLDCNT</name>
                        <description>This counts the total number folded instructions. This counter initializes to 0 when enabled.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_PCSR</name>
                  <displayName>PCSR</displayName>
                  <description>DWT Program Counter Sample Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>EIASAMPLE</name>
                        <description>Execution instruction address sample, or 0xFFFFFFFF if the core is halted.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_COMP0</name>
                  <displayName>COMP0</displayName>
                  <description>DWT Comparator Register 0</description>
                  <addressOffset>0x20</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>COMP</name>
                        <description>Data value to compare against PC and the data address as given by DWT_FUNCTION0. DWT_COMP0 can also compare against the value of the PC Sampler Counter (DWT_CYCCNT).</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_MASK0</name>
                  <displayName>MASK0</displayName>
                  <description>DWT Mask Register 0</description>
                  <addressOffset>0x24</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>MASK</name>
                        <description>Mask on data address when matching against COMP. This is the size of the ignore mask. hat is, DWT matching is performed as:(ADDR ANDed with (~0 left bit-shifted by MASK)) == COMP. However, the actual comparison is slightly more complex to enable matching an address wherever it appears on a bus. So, if COMP is 3, this matches a word access of 0, because 3 would be within the word.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_FUNCTION0</name>
                  <displayName>FUNCTION0</displayName>
                  <description>DWT Function Register 0</description>
                  <addressOffset>0x28</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>FUNCTION</name>
                        <description>Function settings. Note 1: If the ETM is not fitted, then ETM trigger is not possible. Note 2: Data value is only sampled for accesses that do not fault (MPU or bus fault). The PC is sampled irrespective of any faults. The PC is only sampled for the first address of a burst. Note 3: PC match is not recommended for watchpoints because it stops after the instruction. It mainly guards and triggers the ETM.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>EMITRANGE = 0, sample and emit PC through ITM. EMITRANGE = 1, emit address offset through ITM</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>EMITRANGE = 0, emit data through ITM on read and write. EMITRANGE = 1, emit data and address offset through ITM on read or write.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>EMITRANGE = 0, sample PC and data value through ITM on read or write. EMITRANGE = 1, emit address offset and data value through ITM on read or write.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0100</name>
                                <description>Watchpoint on PC match.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0101</name>
                                <description>Watchpoint on read.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0110</name>
                                <description>Watchpoint on write.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0111</name>
                                <description>Watchpoint on read or write.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1000</name>
                                <description>ETM trigger on PC match</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1001</name>
                                <description>ETM trigger on read</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1010</name>
                                <description>ETM trigger on write</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1011</name>
                                <description>ETM trigger on read or write</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1100</name>
                                <description>EMITRANGE = 0, sample data for read transfers. EMITRANGE = 1, sample Daddr [15:0] for read transfers</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1101</name>
                                <description>EMITRANGE = 0, sample data for write transfers. EMITRANGE = 1, sample Daddr [15:0] for write transfers</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1110</name>
                                <description>EMITRANGE = 0, sample PC + data for read transfers. EMITRANGE = 1, sample Daddr [15:0] + data for read transfers</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1111</name>
                                <description>EMITRANGE = 0, sample PC + data for write transfers. EMITRANGE = 1, sample Daddr [15:0] + data for write transfers</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>EMITRANGE</name>
                        <description>Emit range field. Reserved to permit emitting offset when range match occurs. Reset clears the EMITRANGE bit. PC sampling is not supported when EMITRANGE is enabled. EMITRANGE only applies for: FUNCTION = b0001, b0010, b0011, b1100, b1101, b1110, and b1111.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVMATCH</name>
                        <description>This bit is only available in comparator 1. When DATAVMATCH is set, this comparator performs data value compares. The comparators given by DATAVADDR0 and DATAVADDR1provide the address for the data comparison. If DATAVMATCH is set in DWT_FUNCTION1, the FUNCTION setting for the comparators given by DATAVADDR0 and DATAVADDR1 are overridden and those comparators only provide the address match for the data comparison.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>LNK1ENA</name>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>DATAVADDR1 not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>DATAVADDR1 supported (enabled).</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVSIZE</name>
                        <description>Defines the size of the data in the COMP register that is to be matched:</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>byte</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>halfword</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>word</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>Unpredictable.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVADDR0</name>
                        <description>Identity of a linked address comparator for data value matching when DATAVMATCH == 1.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVADDR1</name>
                        <description>Identity of a second linked address comparator for data value matching when DATAVMATCH == 1 and LNK1ENA == 1.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MATCHED</name>
                        <description>This bit is set when the comparator matches, and indicates that the operation defined by FUNCTION has occurred since this bit was last read. This bit is cleared on read.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_COMP1</name>
                  <displayName>COMP1</displayName>
                  <description>DWT Comparator Register 1</description>
                  <addressOffset>0x30</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>COMP</name>
                        <description>Data value to compare against PC and the data address as given by DWT_FUNCTION1.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_MASK1</name>
                  <displayName>MASK1</displayName>
                  <description>DWT Mask Register 1</description>
                  <addressOffset>0x34</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>MASK</name>
                        <description>Mask on data address when matching against COMP. This is the size of the ignore mask. hat is, DWT matching is performed as:(ADDR ANDed with (~0 left bit-shifted by MASK)) == COMP. However, the actual comparison is slightly more complex to enable matching an address wherever it appears on a bus. So, if COMP is 3, this matches a word access of 0, because 3 would be within the word.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_FUNCTION1</name>
                  <displayName>FUNCTION1</displayName>
                  <description>DWT Function Register 1</description>
                  <addressOffset>0x38</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>FUNCTION</name>
                        <description>Function settings. Note 1: If the ETM is not fitted, then ETM trigger is not possible. Note 2: Data value is only sampled for accesses that do not fault (MPU or bus fault). The PC is sampled irrespective of any faults. The PC is only sampled for the first address of a burst. Note 3: FUNCTION is overridden for comparators given by DATAVADDR0 and DATAVADDR1 in DWT_FUNCTION1if DATAVMATCH is also set in DWT_FUNCTION1. The comparators given by DATAVADDR0 and DATAVADDR1 can then only perform address comparator matches for comparator 1 data matches. Note 4: If the data matching functionality is not included during implementation it is not possible to set DATAVADDR0, DATAVADDR1, or DATAVMATCH in DWT_FUNCTION1. This means that the data matching functionality is not available in the implementation. Test the availability of data matching by writing and reading the DATAVMATCH bit in DWT_FUNCTION1. If it is not settable then data matching is unavailable. Note 5: PC match is not recommended for watchpoints because it stops after the instruction. It mainly guards and triggers the ETM.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>EMITRANGE = 0, sample and emit PC through ITM. EMITRANGE = 1, emit address offset through ITM</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>EMITRANGE = 0, emit data through ITM on read and write. EMITRANGE = 1, emit data and address offset through ITM on read or write.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>EMITRANGE = 0, sample PC and data value through ITM on read or write. EMITRANGE = 1, emit address offset and data value through ITM on read or write.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0100</name>
                                <description>Watchpoint on PC match.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0101</name>
                                <description>Watchpoint on read.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0110</name>
                                <description>Watchpoint on write.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0111</name>
                                <description>Watchpoint on read or write.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1000</name>
                                <description>ETM trigger on PC match</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1001</name>
                                <description>ETM trigger on read</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1010</name>
                                <description>ETM trigger on write</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1011</name>
                                <description>ETM trigger on read or write</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1100</name>
                                <description>EMITRANGE = 0, sample data for read transfers. EMITRANGE = 1, sample Daddr [15:0] for read transfers</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1101</name>
                                <description>EMITRANGE = 0, sample data for write transfers. EMITRANGE = 1, sample Daddr [15:0] for write transfers</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1110</name>
                                <description>EMITRANGE = 0, sample PC + data for read transfers. EMITRANGE = 1, sample Daddr [15:0] + data for read transfers</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1111</name>
                                <description>EMITRANGE = 0, sample PC + data for write transfers. EMITRANGE = 1, sample Daddr [15:0] + data for write transfers</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>EMITRANGE</name>
                        <description>Emit range field. Reserved to permit emitting offset when range match occurs. Reset clears the EMITRANGE bit. PC sampling is not supported when EMITRANGE is enabled. EMITRANGE only applies for: FUNCTION = b0001, b0010, b0011, b1100, b1101, b1110, and b1111.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CYCMATCH</name>
                        <description>Only available in comparator 0. When set, this comparator compares against the clock cycle counter.</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVMATCH</name>
                        <description>This bit is only available in comparator 1. When DATAVMATCH is set, this comparator performs data value compares. The comparators given by DATAVADDR0 and DATAVADDR1provide the address for the data comparison. If DATAVMATCH is set in DWT_FUNCTION1, the FUNCTION setting for the comparators given by DATAVADDR0 and DATAVADDR1 are overridden and those comparators only provide the address match for the data comparison.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>LNK1ENA</name>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>DATAVADDR1 not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>DATAVADDR1 supported (enabled).</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVSIZE</name>
                        <description>Defines the size of the data in the COMP register that is to be matched:</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>byte</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>halfword</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>word</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>Unpredictable.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVADDR0</name>
                        <description>Identity of a linked address comparator for data value matching when DATAVMATCH == 1.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVADDR1</name>
                        <description>Identity of a second linked address comparator for data value matching when DATAVMATCH == 1 and LNK1ENA == 1.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MATCHED</name>
                        <description>This bit is set when the comparator matches, and indicates that the operation defined by FUNCTION has occurred since this bit was last read. This bit is cleared on read.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_COMP2</name>
                  <displayName>COMP2</displayName>
                  <description>DWT Comparator Register 2</description>
                  <addressOffset>0x40</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>COMP</name>
                        <description>Data value to compare against PC and the data address as given by DWT_FUNCTION2.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_MASK2</name>
                  <displayName>MASK2</displayName>
                  <description>DWT Mask Register 2</description>
                  <addressOffset>0x44</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>MASK</name>
                        <description>Mask on data address when matching against COMP. This is the size of the ignore mask. hat is, DWT matching is performed as:(ADDR ANDed with (~0 left bit-shifted by MASK)) == COMP. However, the actual comparison is slightly more complex to enable matching an address wherever it appears on a bus. So, if COMP is 3, this matches a word access of 0, because 3 would be within the word.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_FUNCTION2</name>
                  <displayName>FUNCTION2</displayName>
                  <description>DWT Function Register 2</description>
                  <addressOffset>0x48</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>FUNCTION</name>
                        <description>Function settings. Note 1: If the ETM is not fitted, then ETM trigger is not possible. Note 2: Data value is only sampled for accesses that do not fault (MPU or bus fault). The PC is sampled irrespective of any faults. The PC is only sampled for the first address of a burst. Note 3: PC match is not recommended for watchpoints because it stops after the instruction. It mainly guards and triggers the ETM.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>EMITRANGE = 0, sample and emit PC through ITM. EMITRANGE = 1, emit address offset through ITM</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>EMITRANGE = 0, emit data through ITM on read and write. EMITRANGE = 1, emit data and address offset through ITM on read or write.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>EMITRANGE = 0, sample PC and data value through ITM on read or write. EMITRANGE = 1, emit address offset and data value through ITM on read or write.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0100</name>
                                <description>Watchpoint on PC match.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0101</name>
                                <description>Watchpoint on read.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0110</name>
                                <description>Watchpoint on write.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0111</name>
                                <description>Watchpoint on read or write.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1000</name>
                                <description>ETM trigger on PC match</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1001</name>
                                <description>ETM trigger on read</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1010</name>
                                <description>ETM trigger on write</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1011</name>
                                <description>ETM trigger on read or write</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1100</name>
                                <description>EMITRANGE = 0, sample data for read transfers. EMITRANGE = 1, sample Daddr [15:0] for read transfers</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1101</name>
                                <description>EMITRANGE = 0, sample data for write transfers. EMITRANGE = 1, sample Daddr [15:0] for write transfers</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1110</name>
                                <description>EMITRANGE = 0, sample PC + data for read transfers. EMITRANGE = 1, sample Daddr [15:0] + data for read transfers</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1111</name>
                                <description>EMITRANGE = 0, sample PC + data for write transfers. EMITRANGE = 1, sample Daddr [15:0] + data for write transfers</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>EMITRANGE</name>
                        <description>Emit range field. Reserved to permit emitting offset when range match occurs. Reset clears the EMITRANGE bit. PC sampling is not supported when EMITRANGE is enabled. EMITRANGE only applies for: FUNCTION = b0001, b0010, b0011, b1100, b1101, b1110, and b1111.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVMATCH</name>
                        <description>This bit is only available in comparator 1. When DATAVMATCH is set, this comparator performs data value compares. The comparators given by DATAVADDR0 and DATAVADDR1provide the address for the data comparison. If DATAVMATCH is set in DWT_FUNCTION1, the FUNCTION setting for the comparators given by DATAVADDR0 and DATAVADDR1 are overridden and those comparators only provide the address match for the data comparison.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>LNK1ENA</name>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>DATAVADDR1 not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>DATAVADDR1 supported (enabled).</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVSIZE</name>
                        <description>Defines the size of the data in the COMP register that is to be matched:</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>byte</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>halfword</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>word</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>Unpredictable.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVADDR0</name>
                        <description>Identity of a linked address comparator for data value matching when DATAVMATCH == 1.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVADDR1</name>
                        <description>Identity of a second linked address comparator for data value matching when DATAVMATCH == 1 and LNK1ENA == 1.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MATCHED</name>
                        <description>This bit is set when the comparator matches, and indicates that the operation defined by FUNCTION has occurred since this bit was last read. This bit is cleared on read.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_COMP3</name>
                  <displayName>COMP3</displayName>
                  <description>DWT Comparator Register 3</description>
                  <addressOffset>0x50</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>COMP</name>
                        <description>Data value to compare against PC and the data address as given by DWT_FUNCTION3.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_MASK3</name>
                  <displayName>MASK3</displayName>
                  <description>DWT Mask Register 3</description>
                  <addressOffset>0x54</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>MASK</name>
                        <description>Mask on data address when matching against COMP. This is the size of the ignore mask. hat is, DWT matching is performed as:(ADDR ANDed with (~0 left bit-shifted by MASK)) == COMP. However, the actual comparison is slightly more complex to enable matching an address wherever it appears on a bus. So, if COMP is 3, this matches a word access of 0, because 3 would be within the word.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DWT_FUNCTION3</name>
                  <displayName>FUNCTION3</displayName>
                  <description>DWT Function Register 3</description>
                  <addressOffset>0x58</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>FUNCTION</name>
                        <description>Function settings. Note 1: If the ETM is not fitted, then ETM trigger is not possible. Note 2: Data value is only sampled for accesses that do not fault (MPU or bus fault). The PC is sampled irrespective of any faults. The PC is only sampled for the first address of a burst. Note 3: PC match is not recommended for watchpoints because it stops after the instruction. It mainly guards and triggers the ETM.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>Disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>EMITRANGE = 0, sample and emit PC through ITM. EMITRANGE = 1, emit address offset through ITM</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>EMITRANGE = 0, emit data through ITM on read and write. EMITRANGE = 1, emit data and address offset through ITM on read or write.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>EMITRANGE = 0, sample PC and data value through ITM on read or write. EMITRANGE = 1, emit address offset and data value through ITM on read or write.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0100</name>
                                <description>Watchpoint on PC match.</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0101</name>
                                <description>Watchpoint on read.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0110</name>
                                <description>Watchpoint on write.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0111</name>
                                <description>Watchpoint on read or write.</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1000</name>
                                <description>ETM trigger on PC match</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1001</name>
                                <description>ETM trigger on read</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1010</name>
                                <description>ETM trigger on write</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1011</name>
                                <description>ETM trigger on read or write</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1100</name>
                                <description>EMITRANGE = 0, sample data for read transfers. EMITRANGE = 1, sample Daddr [15:0] for read transfers</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1101</name>
                                <description>EMITRANGE = 0, sample data for write transfers. EMITRANGE = 1, sample Daddr [15:0] for write transfers</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1110</name>
                                <description>EMITRANGE = 0, sample PC + data for read transfers. EMITRANGE = 1, sample Daddr [15:0] + data for read transfers</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1111</name>
                                <description>EMITRANGE = 0, sample PC + data for write transfers. EMITRANGE = 1, sample Daddr [15:0] + data for write transfers</description>
                                <value>15</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>EMITRANGE</name>
                        <description>Emit range field. Reserved to permit emitting offset when range match occurs. Reset clears the EMITRANGE bit. PC sampling is not supported when EMITRANGE is enabled. EMITRANGE only applies for: FUNCTION = b0001, b0010, b0011, b1100, b1101, b1110, and b1111.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVMATCH</name>
                        <description>This bit is only available in comparator 1. When DATAVMATCH is set, this comparator performs data value compares. The comparators given by DATAVADDR0 and DATAVADDR1provide the address for the data comparison. If DATAVMATCH is set in DWT_FUNCTION1, the FUNCTION setting for the comparators given by DATAVADDR0 and DATAVADDR1 are overridden and those comparators only provide the address match for the data comparison.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>LNK1ENA</name>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>DATAVADDR1 not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>DATAVADDR1 supported (enabled).</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVSIZE</name>
                        <description>Defines the size of the data in the COMP register that is to be matched:</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>byte</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>halfword</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>word</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>Unpredictable.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DATAVADDR0</name>
                        <description>Identity of a linked address comparator for data value matching when DATAVMATCH == 1.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DATAVADDR1</name>
                        <description>Identity of a second linked address comparator for data value matching when DATAVMATCH == 1 and LNK1ENA == 1.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MATCHED</name>
                        <description>This bit is set when the comparator matches, and indicates that the operation defined by FUNCTION has occurred since this bit was last read. This bit is cleared on read.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>FPB</name>
        <version>356.0</version>
        <description>FPB</description>
        <baseAddress>0xE0002000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>FP_CTRL</name>
                  <displayName>FP_CTRL</displayName>
                  <description>Flash Patch Control Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000130</resetValue>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Flash patch unit enable bit</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>flash patch unit disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>flash patch unit enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>KEY</name>
                        <description>Key field. To write to the Flash Patch Control Register, you must write a 1 to this write-only bit.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>NUM_CODE1</name>
                        <description>Number of code slots field.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no code slots</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>two code slots</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0110</name>
                                <description>six code slots</description>
                                <value>6</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>NUM_LIT</name>
                        <description>Number of literal slots field.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no literal slots</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>two literal slots</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>NUM_CODE2</name>
                        <description>Number of full banks of code comparators, sixteen comparators per bank. Where less than sixteen code comparators are provided, the bank count is zero, and the number present indicated by NUM_CODE. This read only field contains 3'b000 to indicate 0 banks for Cortex-M4 processor.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_REMAP</name>
                  <displayName>FP_REMAP</displayName>
                  <description>Flash Patch Remap Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>REMAP</name>
                        <description>Remap base address field.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x18</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP0</name>
                  <displayName>FP_COMP0</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 0. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 0 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 0 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP1</name>
                  <displayName>FP_COMP1</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 1. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 1 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 1 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP2</name>
                  <displayName>FP_COMP2</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 2. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 2 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 2 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP3</name>
                  <displayName>FP_COMP3</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 3. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 3 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 3 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP4</name>
                  <displayName>FP_COMP4</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 4. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 4 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 4 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP5</name>
                  <displayName>FP_COMP5</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 5. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 5 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 5 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP6</name>
                  <displayName>FP_COMP6</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0x20</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 6. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 6 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 6 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FP_COMP7</name>
                  <displayName>FP_COMP7</displayName>
                  <description>Flash Patch Comparator Registers</description>
                  <addressOffset>0x24</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000001</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Compare and remap enable for Flash Patch Comparator Register 7. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Flash Patch Comparator Register 7 compare and remap disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>Flash Patch Comparator Register 7 compare and remap enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COMP</name>
                        <description>Comparison address.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>REPLACE</name>
                        <description>This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00</name>
                                <description>remap to remap address. See FP_REMAP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01</name>
                                <description>set BKPT on lower halfword, upper is unaffected</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10</name>
                                <description>set BKPT on upper halfword, lower is unaffected</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11</name>
                                <description>set BKPT on both lower and upper halfwords.</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>SystemControlSpace</name>
        <version>356.0</version>
        <description>System Control Space for ARM core: SCnSCB, SCB, SysTick, NVIC, CoreDebug, MPU, FPU</description>
        <baseAddress>0xE000E000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>ICTR</name>
                  <displayName>ICTR</displayName>
                  <description>Interrupt Control Type Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>INTLINESNUM</name>
                        <description>Total number of interrupt lines in groups of 32.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ACTLR</name>
                  <displayName>ACTLR</displayName>
                  <description>Auxiliary Control Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>DISMCYCINT</name>
                        <description>Disables interruption of multi-cycle instructions. This increases the interrupt latency of the processor becuase LDM/STM completes before interrupt stacking occurs.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DISDEFWBUF</name>
                        <description>Disables write buffer us during default memorty map accesses. This causes all bus faults to be precise bus faults but decreases the performance of the processor because the stores to memory have to complete before the next instruction can be executed.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DISFOLD</name>
                        <description>Disables IT folding.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DISFPCA</name>
                        <description>Disable automatic update of CONTROL.FPCA</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DISOOFP</name>
                        <description>Disables floating point instructions completing out of order with respect to integer
instructions.</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>ISER0</name>
                  <displayName>ISER0</displayName>
                  <description>Irq 0 to 31 Set Enable Register</description>
                  <addressOffset>0x100</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>SETENA</name>
                        <description>Writing 0 to a SETENA bit has no effect, writing 1 to a bit enables the corresponding interrupt. Reading the bit returns its current enable state. Reset clears the SETENA fields.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ISER1</name>
                  <displayName>ISER1</displayName>
                  <description>Irq 32 to 63 Set Enable Register</description>
                  <addressOffset>0x104</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>SETENA</name>
                        <description>Writing 0 to a SETENA bit has no effect, writing 1 to a bit enables the corresponding interrupt. Reading the bit returns its current enable state. Reset clears the SETENA fields.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ICER0</name>
                  <displayName>ICER0</displayName>
                  <description>Irq 0 to 31 Clear Enable Register</description>
                  <addressOffset>0x180</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>CLRENA</name>
                        <description>Writing 0 to a CLRENA bit has no effect, writing 1 to a bit disables the corresponding interrupt. Reading the bit returns its current enable state. Reset clears the CLRENA field.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ICER1</name>
                  <displayName>ICER1</displayName>
                  <description>Irq 32 to 63 Clear Enable Register</description>
                  <addressOffset>0x184</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>CLRENA</name>
                        <description>Writing 0 to a CLRENA bit has no effect, writing 1 to a bit disables the corresponding interrupt. Reading the bit returns its current enable state. Reset clears the CLRENA field.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ISPR0</name>
                  <displayName>ISPR0</displayName>
                  <description>Irq 0 to 31 Set Pending Register</description>
                  <addressOffset>0x200</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>SETPEND</name>
                        <description>Writing 0 to a SETPEND bit has no effect, writing 1 to a bit pends the corresponding interrupt. Reading the bit returns its current state.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ISPR1</name>
                  <displayName>ISPR1</displayName>
                  <description>Irq 32 to 63 Set Pending Register</description>
                  <addressOffset>0x204</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>SETPEND</name>
                        <description>Writing 0 to a SETPEND bit has no effect, writing 1 to a bit pends the corresponding interrupt. Reading the bit returns its current state.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ICPR0</name>
                  <displayName>ICPR0</displayName>
                  <description>Irq 0 to 31 Clear Pending Register</description>
                  <addressOffset>0x280</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>CLRPEND</name>
                        <description>Writing 0 to a CLRPEND bit has no effect, writing 1 to a bit clears the corresponding pending interrupt. Reading the bit returns its current state.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ICPR1</name>
                  <displayName>ICPR1</displayName>
                  <description>Irq 32 to 63 Clear Pending Register</description>
                  <addressOffset>0x284</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>CLRPEND</name>
                        <description>Writing 0 to a CLRPEND bit has no effect, writing 1 to a bit clears the corresponding pending interrupt. Reading the bit returns its current state.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IABR0</name>
                  <displayName>IABR0</displayName>
                  <description>Irq 0 to 31 Active Bit Register</description>
                  <addressOffset>0x300</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>ACTIVE</name>
                        <description>Interrupt active flags. Reading 0 implies the interrupt is not active or stacked.  Reading 1 implies the interrupt is active or pre-empted and stacked.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IABR1</name>
                  <displayName>IABR1</displayName>
                  <description>Irq 32 to 63 Active Bit Register</description>
                  <addressOffset>0x304</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>ACTIVE</name>
                        <description>Interrupt active flags. Reading 0 implies the interrupt is not active or stacked.  Reading 1 implies the interrupt is active or pre-empted and stacked.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR0</name>
                  <displayName>IPR0</displayName>
                  <description>Irq 0 to 3 Priority Register</description>
                  <addressOffset>0x400</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_0</name>
                        <description>Priority of interrupt 0</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_1</name>
                        <description>Priority of interrupt 1</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_2</name>
                        <description>Priority of interrupt 2</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_3</name>
                        <description>Priority of interrupt 3</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR1</name>
                  <displayName>IPR1</displayName>
                  <description>Irq 4 to 7 Priority Register</description>
                  <addressOffset>0x404</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_4</name>
                        <description>Priority of interrupt 4</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_5</name>
                        <description>Priority of interrupt 5</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_6</name>
                        <description>Priority of interrupt 6</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_7</name>
                        <description>Priority of interrupt 7</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR2</name>
                  <displayName>IPR2</displayName>
                  <description>Irq 8 to 11 Priority Register</description>
                  <addressOffset>0x408</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_8</name>
                        <description>Priority of interrupt 8</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_9</name>
                        <description>Priority of interrupt 9</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_10</name>
                        <description>Priority of interrupt 10</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_11</name>
                        <description>Priority of interrupt 11</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR3</name>
                  <displayName>IPR3</displayName>
                  <description>Irq 12 to 15 Priority Register</description>
                  <addressOffset>0x40C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_12</name>
                        <description>Priority of interrupt 12</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_13</name>
                        <description>Priority of interrupt 13</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_14</name>
                        <description>Priority of interrupt 14</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_15</name>
                        <description>Priority of interrupt 15</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR4</name>
                  <displayName>IPR4</displayName>
                  <description>Irq 16 to 19 Priority Register</description>
                  <addressOffset>0x410</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_16</name>
                        <description>Priority of interrupt 16</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_17</name>
                        <description>Priority of interrupt 17</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_18</name>
                        <description>Priority of interrupt 18</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_19</name>
                        <description>Priority of interrupt 19</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR5</name>
                  <displayName>IPR5</displayName>
                  <description>Irq 20 to 23 Priority Register</description>
                  <addressOffset>0x414</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_20</name>
                        <description>Priority of interrupt 20</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_21</name>
                        <description>Priority of interrupt 21</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_22</name>
                        <description>Priority of interrupt 22</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_23</name>
                        <description>Priority of interrupt 23</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR6</name>
                  <displayName>IPR6</displayName>
                  <description>Irq 24 to 27 Priority Register</description>
                  <addressOffset>0x418</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_24</name>
                        <description>Priority of interrupt 24</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_25</name>
                        <description>Priority of interrupt 25</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_26</name>
                        <description>Priority of interrupt 26</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_27</name>
                        <description>Priority of interrupt 27</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR7</name>
                  <displayName>IPR7</displayName>
                  <description>Irq 28 to 31 Priority Register</description>
                  <addressOffset>0x41C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_28</name>
                        <description>Priority of interrupt 28</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_29</name>
                        <description>Priority of interrupt 29</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_30</name>
                        <description>Priority of interrupt 30</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_31</name>
                        <description>Priority of interrupt 31</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR8</name>
                  <displayName>IPR8</displayName>
                  <description>Irq 32 to 35 Priority Register</description>
                  <addressOffset>0x420</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_32</name>
                        <description>Priority of interrupt 32</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_33</name>
                        <description>Priority of interrupt 33</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_34</name>
                        <description>Priority of interrupt 34</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_35</name>
                        <description>Priority of interrupt 35</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR9</name>
                  <displayName>IPR9</displayName>
                  <description>Irq 36 to 39 Priority Register</description>
                  <addressOffset>0x424</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_36</name>
                        <description>Priority of interrupt 36</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_37</name>
                        <description>Priority of interrupt 37</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_38</name>
                        <description>Priority of interrupt 38</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_39</name>
                        <description>Priority of interrupt 39</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR10</name>
                  <displayName>IPR10</displayName>
                  <description>Irq 40 to 43 Priority Register</description>
                  <addressOffset>0x428</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_40</name>
                        <description>Priority of interrupt 40</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_41</name>
                        <description>Priority of interrupt 41</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_42</name>
                        <description>Priority of interrupt 42</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_43</name>
                        <description>Priority of interrupt 43</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR11</name>
                  <displayName>IPR11</displayName>
                  <description>Irq 44 to 47 Priority Register</description>
                  <addressOffset>0x42C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_44</name>
                        <description>Priority of interrupt 44</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_45</name>
                        <description>Priority of interrupt 45</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_46</name>
                        <description>Priority of interrupt 46</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_47</name>
                        <description>Priority of interrupt 47</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR12</name>
                  <displayName>IPR12</displayName>
                  <description>Irq 48 to 51 Priority Register</description>
                  <addressOffset>0x430</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_48</name>
                        <description>Priority of interrupt 48</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_49</name>
                        <description>Priority of interrupt 49</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_50</name>
                        <description>Priority of interrupt 50</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_51</name>
                        <description>Priority of interrupt 51</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR13</name>
                  <displayName>IPR13</displayName>
                  <description>Irq 52 to 55 Priority Register</description>
                  <addressOffset>0x434</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_52</name>
                        <description>Priority of interrupt 52</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_53</name>
                        <description>Priority of interrupt 53</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_54</name>
                        <description>Priority of interrupt 54</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_55</name>
                        <description>Priority of interrupt 55</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR14</name>
                  <displayName>IPR14</displayName>
                  <description>Irq 56 to 59 Priority Register</description>
                  <addressOffset>0x438</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_56</name>
                        <description>Priority of interrupt 56</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_57</name>
                        <description>Priority of interrupt 57</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_58</name>
                        <description>Priority of interrupt 58</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_59</name>
                        <description>Priority of interrupt 59</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>IPR15</name>
                  <displayName>IPR15</displayName>
                  <description>Irq 60 to 63 Priority Register</description>
                  <addressOffset>0x43C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_60</name>
                        <description>Priority of interrupt 60</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_61</name>
                        <description>Priority of interrupt 61</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_62</name>
                        <description>Priority of interrupt 62</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_63</name>
                        <description>Priority of interrupt 63</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>STIR</name>
                  <displayName>STIR</displayName>
                  <description>Software Trigger Interrupt Register</description>
                  <addressOffset>0xF00</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>INTID</name>
                        <description>Interrupt ID field. Writing a value to the INTID field is the same as manually pending an interrupt by setting the corresponding interrupt bit in an Interrupt Set Pending Register.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x9</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>STCSR</name>
                  <displayName>STCSR</displayName>
                  <description>SysTick Control and Status Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000004</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Enable SysTick counter</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>First</name>
                                <description>Counter disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TICKINT</name>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>VAL_0</name>
                                <description>Counting down to zero does not pend the SysTick handler. Software can use COUNTFLAG to determine if the SysTick handler has ever counted to zero.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VAL_1</name>
                                <description>Counting down to zero pends the SysTick handler.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CLKSOURCE</name>
                        <description>Clock source.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CLKSOURCE_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>VAL_0</name>
                                <description>Not applicable</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VAL_1</name>
                                <description>Core clock</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COUNTFLAG</name>
                        <description>Returns 1 if timer counted to 0 since last time this was read. Clears on read by application of any part of the SysTick Control and Status Register. If read by the debugger using the DAP, this bit is cleared on read-only if the MasterType bit in the AHB-AP Control Register is set to 0. Otherwise, the COUNTFLAG bit is not changed by the debugger read.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>STRVR</name>
                  <displayName>STRVR</displayName>
                  <description>SysTick Reload Value Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>RELOAD</name>
                        <description>Value to load into the SysTick Current Value Register when the counter reaches 0.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x18</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>STCVR</name>
                  <displayName>STCVR</displayName>
                  <description>SysTick Current Value Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>CURRENT</name>
                        <description>Current value at the time the register is accessed. No read-modify-write protection is provided, so change with care. Writing to it with any value clears the register to 0. Clearing this register also clears the COUNTFLAG bit of the SysTick Control and Status Register.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x18</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>STCR</name>
                  <displayName>STCR</displayName>
                  <description>SysTick Calibration Value Register</description>
                  <addressOffset>0x1C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>TENMS</name>
                        <description>Reads as zero. Indicates calibration value is not known.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x18</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SKEW</name>
                        <description>Reads as one. The calibration value is not exactly 10ms because of clock frequency. This could affect its suitability as a software real time clock.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>NOREF</name>
                        <description>Reads as one. Indicates that no separate reference clock is provided.</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>CPUID</name>
                  <displayName>CPUID</displayName>
                  <description>CPUID Base Register</description>
                  <addressOffset>0xD00</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x410fc241</resetValue>
                  <fields>
                    <field>
                        <name>REVISION</name>
                        <description>Implementation defined revision number.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>PARTNO</name>
                        <description>Number of processor within family.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0xC</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>CONSTANT</name>
                        <description>Reads as 0xC</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>VARIANT</name>
                        <description>Implementation defined variant number.</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>IMPLEMENTER</name>
                        <description>Implementor code.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ICSR</name>
                  <displayName>ICSR</displayName>
                  <description>Interrupt Control State Register</description>
                  <addressOffset>0xD04</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>VECTACTIVE</name>
                        <description>Active ISR number field. Reset clears the VECTACTIVE field.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x9</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>RETTOBASE</name>
                        <description>This bit is 1 when the set of all active exceptions minus the IPSR_current_exception yields the empty set.</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>VECTPENDING</name>
                        <description>Pending ISR number field. VECTPENDING contains the interrupt number of the highest priority pending ISR.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x6</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>ISRPENDING</name>
                        <description>Interrupt pending flag. Excludes NMI and faults.</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>interrupt not pending</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>interrupt pending</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ISRPREEMPT</name>
                        <description>You must only use this at debug time. It indicates that a pending interrupt is to be taken in the next running cycle. If C_MASKINTS is clear in the Debug Halting Control and Status Register, the interrupt is serviced.</description>
                        <bitOffset>0x17</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>a pending exception is not serviced.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>a pending exception is serviced on exit from the debug halt state</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PENDSTCLR</name>
                        <description>Clear pending SysTick bit</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>do not clear pending SysTick</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>clear pending SysTick</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PENDSTSET</name>
                        <description>Set a pending SysTick bit.</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>do not set pending SysTick</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>set pending SysTick</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PENDSVCLR</name>
                        <description>Clear pending pendSV bit</description>
                        <bitOffset>0x1B</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>do not clear pending pendSV</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>clear pending pendSV</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PENDSVSET</name>
                        <description>Set pending pendSV bit.</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>do not set pending pendSV</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>set pending PendSV</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>NMIPENDSET</name>
                        <description>Set pending NMI bit. NMIPENDSET pends and activates an NMI. Because NMI is the highest-priority interrupt, it takes effect as soon as it registers.</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>do not set pending NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>set pending NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>VTOR</name>
                  <displayName>VTOR</displayName>
                  <description>Vector Table Offset Register</description>
                  <addressOffset>0xD08</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>TBLOFF</name>
                        <description>Vector table base offset field. Contains the offset of the table base from the bottom of the SRAM or CODE space.</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x16</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>TBLBASE</name>
                        <description>Table base is in Code (0) or RAM (1).</description>
                        <bitOffset>0x1D</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AIRCR</name>
                  <displayName>AIRCR</displayName>
                  <description>Application Interrupt/Reset Control Register</description>
                  <addressOffset>0xD0C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0xfa050000</resetValue>
                  <resetMask>0xffff7fff</resetMask>
                  <fields>
                    <field>
                        <name>VECTRESET</name>
                        <description>System Reset bit. Resets the system, with the exception of debug components. The VECTRESET bit self-clears. Reset clears the VECTRESET bit. For debugging, only write this bit when the core is halted.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>VECTCLRACTIVE</name>
                        <description>Clears all active state information for active NMI, fault, and interrupts.  It is the responsibility of the application to reinitialize the stack. The VECTCLRACTIVE bit is for returning to a known state during debug. The VECTCLRACTIVE bit self-clears. IPSR is not cleared by this operation. So, if used by an application, it must only be used at the base level of activation, or within a system handler whose active bit can be set.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SYSRESETREQ</name>
                        <description>Causes a signal to be asserted to the outer system that indicates a reset is requested. Intended to force a large system reset of all major components except for debug. Setting this bit does not prevent Halting Debug from running.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>PRIGROUP</name>
                        <description>Interrupt priority grouping field. The PRIGROUP field is a binary point position indicator for creating subpriorities for exceptions that share the same pre-emption level. It divides the PRI_n field in the Interrupt Priority Register into a pre-emption level and a subpriority level. The binary point is a left-of value. This means that the PRIGROUP value represents a point starting at the left of the Least Significant Bit (LSB). This is bit [0] of 7:0. The lowest value might not be 0 depending on the number of bits allocated for priorities, and implementation choices</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>ENDIANESS</name>
                        <description>Data endianness bit. ENDIANNESS is sampled from the BIGEND input port during reset. You cannot change ENDIANNESS outside of reset.</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>little endian</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>big endian</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VECTKEY</name>
                        <description>Register key. Writing to this register requires 0x5FA in the VECTKEY field. Otherwise the write value is ignored.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SCR</name>
                  <displayName>SCR</displayName>
                  <description>System Control Register</description>
                  <addressOffset>0xD10</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>SLEEPONEXIT</name>
                        <description>Sleep on exit when returning from Handler mode to Thread mode. Enables interrupt driven applications to avoid returning to empty main application.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>do not sleep when returning to thread mode</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>sleep on ISR exit</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SLEEPDEEP</name>
                        <description>Sleep deep bit.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not OK to turn off system clock</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>indicates to the system that Cortex-M4 clock can be stopped. Setting this bit causes the SLEEPDEEP port to be asserted when the processor can be stopped.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SEVONPEND</name>
                        <description>When enabled, this causes WFE to wake up when an interrupt moves from inactive to pended. Otherwise, WFE only wakes up from an event signal, external and SEV instruction generated. The event input, RXEV, is registered even when not waiting for an event, and so effects the next WFE.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CCR</name>
                  <displayName>CCR</displayName>
                  <description>Configuration Control Register</description>
                  <addressOffset>0xD14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000200</resetValue>
                  <fields>
                    <field>
                        <name>NONBASETHREDENA</name>
                        <description>When 0, default, It is only possible to enter Thread mode when returning from the last exception. When set to 1, Thread mode can be entered from any level in Handler mode by controlled return value.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>USERSETMPEND</name>
                        <description>If written as 1, enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception, which is one associated with the Main stack pointer.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UNALIGN_TRP</name>
                        <description>Trap for unaligned access. This enables faulting/halting on any unaligned half or full word access. Unaligned load-store multiples always fault. The relevant Usage Fault Status Register bit is UNALIGNED.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DIV_0_TRP</name>
                        <description>Trap on Divide by 0. This enables faulting/halting when an attempt is made to divide by 0. The relevant Usage Fault Status Register bit is DIVBYZERO.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BFHFNMIGN</name>
                        <description>When enabled, this causes handlers running at priority -1 and -2 (Hard Fault, NMI, and FAULTMASK escalated handlers) to ignore Data Bus faults caused by load and store instructions. When disabled, these bus faults cause a lock-up. You must only use this enable with extreme caution. All data bus faults are ignored therefore you must only use it when the handler and its data are in absolutely safe memory. Its normal use is to probe system devices and bridges to detect control path problems and fix them.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>STKALIGN</name>
                        <description>Stack alignment bit.</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>Only 4-byte alignment is guaranteed for the SP used prior to the exception on exception entry.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned and the context to restore it is saved. The SP is restored on the associated exception return.</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SHPR1</name>
                  <displayName>SHPR1</displayName>
                  <description>System Handlers 4-7 Priority Register</description>
                  <addressOffset>0xD18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_4</name>
                        <description>Priority of system handler 4.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_5</name>
                        <description>Priority of system handler 5.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_6</name>
                        <description>Priority of system handler 6.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_7</name>
                        <description>Priority of system handler 7.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SHPR2</name>
                  <displayName>SHPR2</displayName>
                  <description>System Handlers 8-11 Priority Register</description>
                  <addressOffset>0xD1C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_8</name>
                        <description>Priority of system handler 8.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_9</name>
                        <description>Priority of system handler 9.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_10</name>
                        <description>Priority of system handler 10.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_11</name>
                        <description>Priority of system handler 11.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SHPR3</name>
                  <displayName>SHPR3</displayName>
                  <description>System Handlers 12-15 Priority Register</description>
                  <addressOffset>0xD20</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>PRI_12</name>
                        <description>Priority of system handler 12.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_13</name>
                        <description>Priority of system handler 13.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_14</name>
                        <description>Priority of system handler 14.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRI_15</name>
                        <description>Priority of system handler 15.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SHCSR</name>
                  <displayName>SHCSR</displayName>
                  <description>System Handler Control and State Register</description>
                  <addressOffset>0xD24</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>MEMFAULTACT</name>
                        <description>MemManage active flag.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BUSFAULTACT</name>
                        <description>BusFault active flag.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>USGFAULTACT</name>
                        <description>UsageFault active flag.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SVCALLACT</name>
                        <description>SVCall active flag.</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MONITORACT</name>
                        <description>the Monitor active flag.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PENDSVACT</name>
                        <description>PendSV active flag.</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SYSTICKACT</name>
                        <description>SysTick active flag.</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not active</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>active</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>USGFAULTPENDED</name>
                        <description>usage fault pended flag.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not pended</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>pended</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MEMFAULTPENDED</name>
                        <description>MemManage pended flag.</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not pended</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>pended</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BUSFAULTPENDED</name>
                        <description>BusFault pended flag.</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not pended</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>pended</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SVCALLPENDED</name>
                        <description>SVCall pended flag.</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not pended</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>pended</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MEMFAULTENA</name>
                        <description>MemManage fault system handler enable</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BUSFAULTENA</name>
                        <description>Bus fault system handler enable</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>USGFAULTENA</name>
                        <description>Usage fault system handler enable</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>disabled</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>enabled</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CFSR</name>
                  <displayName>CFSR</displayName>
                  <description>Configurable Fault Status Registers</description>
                  <addressOffset>0xD28</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>IACCVIOL</name>
                        <description>Instruction access violation flag. Attempting to fetch an instruction from a location that does not permit execution sets the IACCVIOL flag. This occurs on any access to an XN region, even when the MPU is disabled or not present. The return PC points to the faulting instruction. The MMAR is not written.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DACCVIOL</name>
                        <description>Data access violation flag. Attempting to load or store at a location that does not permit the operation sets the DACCVIOL flag. The return PC points to the faulting instruction. This error loads MMAR with the address of the attempted access.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MUNSTKERR</name>
                        <description>Unstack from exception return has caused one or more access violations. This is chained to the handler, so that the original return stack is still present. SP is not adjusted from failing return and new save is not performed. The MMAR is not written.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MSTKERR</name>
                        <description>Stacking from exception has caused one or more access violations. The SP is still adjusted and the values in the context area on the stack might be incorrect. The MMAR is not written.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MMARVALID</name>
                        <description>Memory Manage Address Register (MMAR) address valid flag. A later-arriving fault, such as a bus fault, can clear a memory manage fault.. If a MemManage fault occurs that is escalated to a Hard Fault because of priority, the Hard Fault handler must clear this bit. This prevents problems on return to a stacked active MemManage handler whose MMAR value has been overwritten.</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>IBUSERR</name>
                        <description>Instruction bus error flag. The IBUSERR flag is set by a prefetch error. The fault stops on the instruction, so if the error occurs under a branch shadow, no fault occurs. The BFAR is not written.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRECISERR</name>
                        <description>Precise data bus error return.</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>IMPRECISERR</name>
                        <description>Imprecise data bus error. It is a BusFault, but the Return PC is not related to the causing instruction. This is not a synchronous fault. So, if detected when the priority of the current activation is higher than the Bus Fault, it only pends. Bus fault activates when returning to a lower priority activation. If a precise fault occurs before returning to a lower priority exception, the handler detects both IMPRECISERR set and one of the precise fault status bits set at the same time. The BFAR is not written.</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UNSTKERR</name>
                        <description>Unstack from exception return has caused one or more bus faults. This is chained to the handler, so that the original return stack is still present. SP is not adjusted from failing return and new save is not performed. The BFAR is not written.</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>STKERR</name>
                        <description>Stacking from exception has caused one or more bus faults. The SP is still adjusted and the values in the context area on the stack might be incorrect. The BFAR is not written.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BFARVALID</name>
                        <description>This bit is set if the Bus Fault Address Register (BFAR) contains a valid address. This is true after a bus fault where the address is known. Other faults can clear this bit, such as a Mem Manage fault occurring later. If a Bus fault occurs that is escalated to a Hard Fault because of priority, the Hard Fault handler must clear this bit. This prevents problems if returning to a stacked active Bus fault handler whose BFAR value has been overwritten.</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UNDEFINSTR</name>
                        <description>The UNDEFINSTR flag is set when the processor attempts to execute an undefined instruction. This is an instruction that the processor cannot decode. The return PC points to the undefined instruction.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>INVSTATE</name>
                        <description>Invalid combination of EPSR and instruction, for reasons other than UNDEFINED instruction. Return PC points to faulting instruction, with the invalid state.</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>INVPC</name>
                        <description>Attempt to load EXC_RETURN into PC illegally. Invalid instruction, invalid context, invalid value. The return PC points to the instruction that tried to set the PC.</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>NOCP</name>
                        <description>Attempt to use a coprocessor instruction. The processor does not support coprocessor instructions.</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>UNALIGNED</name>
                        <description>When UNALIGN_TRP is enabled (see Configuration Control Register on page 8-26), and there is an attempt to make an unaligned memory access, then this fault occurs. Unaligned LDM/STM/LDRD/STRD instructions always fault irrespective of the setting of UNALIGN_TRP.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DIVBYZERO</name>
                        <description>When DIV_0_TRP (see Configuration Control Register on page 8-26) is enabled and an SDIV or UDIV instruction is used with a divisor of 0, this fault occurs The instruction is executed and the return PC points to it. If DIV_0_TRP is not set, then the divide returns a quotient of 0.</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MLSPERR</name>
                        <description>Indicates if MemManage fault occurred during FP lazy state preservation.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>LSPERR</name>
                        <description>Indicates if bus fault occurred during FP lazy state preservation.</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>HFSR</name>
                  <displayName>HFSR</displayName>
                  <description>Hard Fault Status Register</description>
                  <addressOffset>0xD2C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>VECTTBL</name>
                        <description>This bit is set if there is a fault because of vector table read on exception processing (Bus Fault). This case is always a Hard Fault. The return PC points to the pre-empted instruction.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>FORCED</name>
                        <description>Hard Fault activated because a Configurable Fault was received and cannot activate because of priority or because the Configurable Fault is disabled. The Hard Fault handler then has to read the other fault status registers to determine cause.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DEBUGEVT</name>
                        <description>This bit is set if there is a fault related to debug. This is only possible when halting debug is not enabled. For monitor enabled debug, it only happens for BKPT when the current priority is higher than the monitor. When both halting and monitor debug are disabled, it only happens for debug events that are not ignored (minimally, BKPT). The Debug Fault Status Register is updated.</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DFSR</name>
                  <displayName>DFSR</displayName>
                  <description>Debug Fault Status Register</description>
                  <addressOffset>0xD30</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>HALTED</name>
                        <description>Halt request flag. The processor is halted on the next instruction.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>no halt request</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>halt requested by NVIC, including step</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BKPT</name>
                        <description>BKPT flag. The BKPT flag is set by a BKPT instruction in flash patch code, and also by normal code. Return PC points to breakpoint containing instruction.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>no BKPT instruction execution</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>BKPT instruction execution</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DWTTRAP</name>
                        <description>Data Watchpoint and Trace (DWT) flag. The processor stops at the current instruction or at the next instruction.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>no DWT match</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>DWT match</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VCATCH</name>
                        <description>Vector catch flag. When the VCATCH flag is set, a flag in one of the local fault status registers is also set to indicate the type of fault.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>no vector catch occurred</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>vector catch occurred</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>EXTERNAL</name>
                        <description>External debug request flag. The processor stops on next instruction boundary.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>EDBGRQ signal not asserted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>EDBGRQ signal asserted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MMFAR</name>
                  <displayName>MMFAR</displayName>
                  <description>Mem Manage Fault Address Register</description>
                  <addressOffset>0xD34</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>ADDRESS</name>
                        <description>Mem Manage fault address field. ADDRESS is the data address of a faulted load or store attempt. When an unaligned access faults, the address is the actual address that faulted. Because an access can be split into multiple parts, each aligned, this address can be any offset in the range of the requested size. Flags in the Memory Manage Fault Status Register indicate the cause of the fault</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>BFAR</name>
                  <displayName>BFAR</displayName>
                  <description>Bus Fault Address Register</description>
                  <addressOffset>0xD38</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>ADDRESS</name>
                        <description>Bus fault address field. ADDRESS is the data address of a faulted load or store attempt. When an unaligned access faults, the address is the address requested by the instruction, even if that is not the address that faulted. Flags in the Bus Fault Status Register indicate the cause of the fault</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AFSR</name>
                  <displayName>AFSR</displayName>
                  <description>Auxiliary Fault Status Register</description>
                  <addressOffset>0xD3C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>IMPDEF</name>
                        <description>Implementation defined. The bits map directly onto the signal assignment to the AUXFAULT inputs.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PFR0</name>
                  <displayName>PFR0</displayName>
                  <description>Processor Feature register0</description>
                  <addressOffset>0xD40</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000030</resetValue>
                  <fields>
                    <field>
                        <name>STATE0</name>
                        <description>State0 (T-bit == 0)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no ARM encoding</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>N/A</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>STATE1</name>
                        <description>State1 (T-bit == 1)</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>N/A</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>N/A</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>Thumb-2 encoding with the 16-bit basic instructions plus 32-bit Buncond/BL but no other 32-bit basic instructions (Note non-basic 32-bit instructions can be added using the appropriate instruction attribute, but other 32-bit basic instructions cannot.)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>Thumb-2 encoding with all Thumb-2 basic instructions</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>PFR1</name>
                  <displayName>PFR1</displayName>
                  <description>Processor Feature register1</description>
                  <addressOffset>0xD44</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000200</resetValue>
                  <fields>
                    <field>
                        <name>MICROCONTROLLER_PROGRAMMERS_MODEL</name>
                        <description>Microcontroller programmer's model</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>two-stack support</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DFR0</name>
                  <displayName>DFR0</displayName>
                  <description>Debug Feature register0</description>
                  <addressOffset>0xD48</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00100000</resetValue>
                  <fields>
                    <field>
                        <name>MICROCONTROLLER_DEBUG_MODEL</name>
                        <description>Microcontroller Debug Model - memory mapped</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>Microcontroller debug v1 (ITMv1, DWTv1, optional ETM)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>AFR0</name>
                  <displayName>AFR0</displayName>
                  <description>Auxiliary Feature register0</description>
                  <addressOffset>0xD4C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
            </register>
            <register>
                  <name>MMFR0</name>
                  <displayName>MMFR0</displayName>
                  <description>Memory Model Feature register0</description>
                  <addressOffset>0xD50</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00100030</resetValue>
                  <fields>
                    <field>
                        <name>PMSA_SUPPORT</name>
                        <description>PMSA support</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>IMPLEMENTATION DEFINED (N/A)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>PMSA base (features as defined for ARMv6) (N/A)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>PMSAv7 (base plus subregion support)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CACHE_COHERENCE_SUPPORT</name>
                        <description>Cache coherence support</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no shared support</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>partial-inner-shared coherency (coherency amongst some - but not all - of the entities within an inner-coherent domain)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>full-inner-shared coherency (coherency amongst all of the entities within an inner-coherent domain)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>full coherency (coherency amongst all of the entities)</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>OUTER_NON_SHARABLE_SUPPORT</name>
                        <description>Outer non-sharable support</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>Outer non-sharable not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>Outer sharable supported</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>AUXILIARY_REGISTER_SUPPORT</name>
                        <description>Auxiliary register support</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>Auxiliary control register</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MMFR1</name>
                  <displayName>MMFR1</displayName>
                  <description>Memory Model Feature register1</description>
                  <addressOffset>0xD54</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
            </register>
            <register>
                  <name>MMFR2</name>
                  <displayName>MMFR2</displayName>
                  <description>Memory Model Feature register2</description>
                  <addressOffset>0xD58</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>WAIT_FOR_INTERRUPT_STALLING</name>
                        <description>wait for interrupt stalling</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>not supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>wait for interrupt supported</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MMFR3</name>
                  <displayName>MMFR3</displayName>
                  <description>Memory Model Feature register3</description>
                  <addressOffset>0xD5C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
            </register>
            <register>
                  <name>ISAR0</name>
                  <displayName>ISAR0</displayName>
                  <description>ISA Feature register0</description>
                  <addressOffset>0xD60</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x01141110</resetValue>
                  <fields>
                    <field>
                        <name>BITCOUNT_INSTRS</name>
                        <description>BitCount instructions</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no bit-counting instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds CLZ</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BITFIELD_INSTRS</name>
                        <description>BitField instructions</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no bitfield instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds BFC, BFI, SBFX, UBFX</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CMPBRANCH_INSTRS</name>
                        <description>CmpBranch instructions</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no combined compare-and-branch instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds CB{N}Z</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>COPROC_INSTRS</name>
                        <description>Coprocessor instructions</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no coprocessor support, other than for separately attributed architectures such as CP15 or VFP</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds generic CDP, LDC, MCR, MRC, STC</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds generic CDP2, LDC2, MCR2, MRC2, STC2</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>adds generic MCRR, MRRC</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0100</name>
                                <description>adds generic MCRR2, MRRC2</description>
                                <value>4</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DEBUG_INSTRS</name>
                        <description>Debug instructions</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no debug instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds BKPT</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>DIVIDE_INSTRS</name>
                        <description>Divide instructions</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no divide instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds SDIV, UDIV (v1 quotient only result)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ISAR1</name>
                  <displayName>ISAR1</displayName>
                  <description>ISA Feature register1</description>
                  <addressOffset>0xD64</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x02112000</resetValue>
                  <fields>
                    <field>
                        <name>EXTEND_INSRS</name>
                        <description>Extend instructions. Note that the shift options on these instructions are also controlled by the WithShifts_instrs attribute.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no scalar (i.e. non-SIMD) sign/zero-extend instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds SXTB, SXTH, UXTB, UXTH</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>N/A</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>IFTHEN_INSTRS</name>
                        <description>IfThen instructions</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>IT instructions not present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds IT instructions (and IT bits in PSRs)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>IMMEDIATE_INSTRS</name>
                        <description>Immediate instructions</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no special immediate-generating instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds ADDW, MOVW, MOVT, SUBW</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>INTERWORK_INSTRS</name>
                        <description>Interwork instructions</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no interworking instructions supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds BX (and T bit in PSRs)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds BLX, and PC loads have BX-like behavior</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>N/A</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ISAR2</name>
                  <displayName>ISAR2</displayName>
                  <description>ISA Feature register2</description>
                  <addressOffset>0xD68</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x21232231</resetValue>
                  <fields>
                    <field>
                        <name>LOADSTORE_INSTRS</name>
                        <description>LoadStore instructions</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no additional normal load/store instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds LDRD/STRD</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MEMHINT_INSTRS</name>
                        <description>MemoryHint instructions</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no memory hint instructions presen</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds PLD</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds PLD (ie a repeat on value 1)</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>adds PLI</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MULTIACCESSINT_INSTRS</name>
                        <description>Multi-Access interruptible instructions</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>the (LDM/STM) instructions are non-interruptible</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>the (LDM/STM) instructions are restartable</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>the (LDM/STM) instructions are continuable</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MULT_INSTRS</name>
                        <description>Multiply instructions</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>only MUL present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds MLA</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds MLS</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MULTS_INSTRS</name>
                        <description>Multiply instructions (advanced, signed)</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no signed multiply instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds SMULL, SMLAL</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>N/A</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>N/A</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>MULTU_INSTRS</name>
                        <description>Multiply instructions (advanced, unsigned)</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no unsigned multiply instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds UMULL, UMLAL</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>N/A</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REVERSAL_INSTRS</name>
                        <description>Reversal instructions</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no reversal instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds REV, REV16, REVSH</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds RBIT</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ISAR3</name>
                  <displayName>ISAR3</displayName>
                  <description>ISA Feature register3</description>
                  <addressOffset>0xD6C</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x01111131</resetValue>
                  <fields>
                    <field>
                        <name>SATRUATE_INSTRS</name>
                        <description>Saturate instructions</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no non-SIMD saturate instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>N/A</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SIMD_INSTRS</name>
                        <description>SIMD instructions</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no SIMD instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds SSAT, USAT (and the Q flag in the PSRs)</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>N/A</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SVC_INSTRS</name>
                        <description>SVC instructions</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no SVC (SWI) instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds SVC (SWI)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SYNCPRIM_INSTRS</name>
                        <description>SyncPrim instructions. Note there are no LDREXD or STREXD in ARMv7-M. This attribute is used in conjunction with the SyncPrim_instrs_frac attribute in ID_ISAR4[23:20].</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no synchronization primitives present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds LDREX, STREX</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds LDREXB, LDREXH, LDREXD, STREXB, STREXH, STREXD, CLREX(N/A)</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TABBRANCH_INSTRS</name>
                        <description>TableBranch instructions</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no table-branch instructions present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds TBB, TBH</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>THUMBCOPY_INSTRS</name>
                        <description>ThumbCopy instructions</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>Thumb MOV(register) instruction does not allow low reg -> low reg</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds Thumb MOV(register) low reg -> low reg and the CPY alias</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TRUENOP_INSTRS</name>
                        <description>TrueNOP instructions</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>true NOP instructions not present - that is, NOP instructions with no register dependencies</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds "true NOP", and the capability of additional "NOP compatible hints"</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>ISAR4</name>
                  <displayName>ISAR4</displayName>
                  <description>ISA Feature register4</description>
                  <addressOffset>0xD70</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x01310102</resetValue>
                  <fields>
                    <field>
                        <name>UNPRIV_INSTRS</name>
                        <description>Unprivileged instructions</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no "T variant" instructions exist</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds LDRBT, LDRT, STRBT, STRT</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds LDRHT, LDRSBT, LDRSHT, STRHT</description>
                                <value>2</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WITHSHIFTS_INSTRS</name>
                        <description>WithShift instructions. Note that all additions only apply in cases where the encoding supports them - e.g. there is no difference between levels 3 and 4 in the Thumb-2 instruction set. Also note that MOV instructions with shift options should instead be treated as ASR, LSL, LSR, ROR or RRX instructions.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>non-zero shifts only support MOV and shift instructions (see notes)</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>shifts of loads/stores over the range LSL 0-3</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0010</name>
                                <description>adds other constant shift options.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0100</name>
                                <description>adds register-controlled shift options.</description>
                                <value>4</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>WRITEBACK_INSTRS</name>
                        <description>Writeback instructions</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>only non-writeback addressing modes present, except that LDMIA/STMDB/PUSH/POP instructions support writeback addressing.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds all currently-defined writeback addressing modes (ARMv7, Thumb-2)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BARRIER_INSTRS</name>
                        <description>Barrier instructions</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no barrier instructions supported</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds DMB, DSB, ISB barrier instructions</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SYNCPRIM_INSTRS_FRAC</name>
                        <description>SyncPrim_instrs_frac</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>no additional support</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0011</name>
                                <description>adds CLREX, LDREXB, STREXB, LDREXH, STREXH</description>
                                <value>3</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PSR_M_INSTRS</name>
                        <description>PSR_M_instrs</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0000</name>
                                <description>instructions not present</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b0001</name>
                                <description>adds CPS, MRS, and MSR instructions (M-profile forms)</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>CPACR</name>
                  <displayName>CPACR</displayName>
                  <description>Coprocessor Access Control Register</description>
                  <addressOffset>0xD88</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>CP11</name>
                        <description>Access privileges for coprocessor 11. The possible values of each field are: 0b00 = Access denied. Any attempted access generates a NOCP UsageFault. 0b01 = Privileged access only. An unprivileged access generates a NOCP UsageFault. 0b10 = Reserved. 0b11 = Full access. Used in conjunction with the control for CP10, this controls access to the Floating Point Coprocessor.</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>CP10</name>
                        <description>Access privileges for coprocessor 10. The possible values of each field are: 0b00 = Access denied. Any attempted access generates a NOCP UsageFault. 0b01 = Privileged access only. An unprivileged access generates a NOCP UsageFault. 0b10 = Reserved. 0b11 = Full access. Used in conjunction with the control for CP11, this controls access to the Floating Point Coprocessor.</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>FPCCR</name>
                  <displayName>FPCCR</displayName>
                  <description>Floating Point Context Control Register</description>
                  <addressOffset>0xF34</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0xc0000000</resetValue>
                  <fields>
                    <field>
                        <name>ASPEN</name>
                        <description>Automatic State Preservation ENable. When this bit is set is will cause bit [2] of the Special CONTROL register to be set (FPCA) on execution of a floating point instruction which results in the floating point state automatically being preserved on exception entry.</description>
                        <bitOffset>0x1F</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>LSPEN</name>
                        <description>Lazy State Preservation ENable. When the processor performs a context save, space on the stack is reserved for the floating point state but it is not stacked until the new context performs a floating point operation.</description>
                        <bitOffset>0x1E</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MONRDY</name>
                        <description>Indicates whether the the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>BFRDY</name>
                        <description>Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending.</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MMRDY</name>
                        <description>Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>HFRDY</name>
                        <description>Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>THREAD</name>
                        <description>Indicates the processor mode was Thread when it allocated the FP stack frame.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>USER</name>
                        <description>Indicates the privilege level of the software executing was User (Unpriviledged) when the processor allocated the FP stack frame.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>LSPACT</name>
                        <description>Indicates whether Lazy preservation of the FP state is active.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FPCAR</name>
                  <displayName>FPCAR</displayName>
                  <description>Floating-Point Context Address Register</description>
                  <addressOffset>0xF38</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>ADDRESS</name>
                        <description>Holds the (double-word-aligned) location of the unpopulated floating-point register space allocated on an exception stack frame.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1D</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>FPDSCR</name>
                  <displayName>FPDSCR</displayName>
                  <description>Floating Point Default Status Control Register</description>
                  <addressOffset>0xF3C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>AHP</name>
                        <description>Default value for Alternative Half Precision bit. (If this bit is set to 1 then Alternative half-precision format is selected).</description>
                        <bitOffset>0x1A</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>DN</name>
                        <description>Default value for Default NaN mode bit. (If this bit is set to 1 then any operation involving one or more NaNs returns the Default NaN).</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>FZ</name>
                        <description>Default value for Flush-to-Zero mode bit. (If this bit is set to 1 then Flush-to-zero mode is enabled).</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>RMODE</name>
                        <description>Default value for Rounding Mode control field. (The encoding for this field is: 0b00 Round to Nearest (RN) mode, 0b01 Round towards Plus Infinity (RP) mode, 0b10 Round towards Minus Infinity (RM) mode, 0b11 Round towards Zero (RZ) mode. The specified rounding mode is used by almost all floating-point instructions).</description>
                        <bitOffset>0x16</bitOffset>
                        <bitWidth>0x2</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MVFR0</name>
                  <displayName>MVFR0</displayName>
                  <description>Media and FP Feature Register 0 (MVFR0)</description>
                  <addressOffset>0xF40</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x10110021</resetValue>
                  <fields>
                    <field>
                        <name>FP_ROUNDING_MODES</name>
                        <description>Indicates the rounding modes supported by the FP floating-point hardware. The value of this field is: 0b0001 - all rounding modes supported.</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SHORT_VECTORS</name>
                        <description>Indicates the hardware support for FP short vectors. The value of this field is: 0b0000 - not supported in ARMv7-M.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SQUARE_ROOT</name>
                        <description>Indicates the hardware support for FP square root operations. The value of this field is: 0b0001 - supported.</description>
                        <bitOffset>0x14</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>DIVIDE</name>
                        <description>Indicates the hardware support for FP divide operations. The value of this field is: 0b0001 - supported.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>FP_EXCEPTION_TRAPPING</name>
                        <description>Indicates whether the FP hardware implementation supports exception trapping. The value of this field is: 0b0000 - not supported in ARMv7-M.</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>DOUBLE_PRECISION</name>
                        <description>Indicates the hardware support for FP double-precision operations. The value of this field is: 0b0000 - not supported in ARMv7-M.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SINGLE_PRECISION</name>
                        <description>Indicates the hardware support for FP single-precision operations. The value of this field is: 0b0010 - supported.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>A_SIMD_REGISTERS</name>
                        <description>Indicates the size of the FP register bank. The value of this field is: 0b0001 - supported, 16 x 64-bit registers.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MVFR1</name>
                  <displayName>MVFR1</displayName>
                  <description>Media and FP Feature Register 1 (MVFR1)</description>
                  <addressOffset>0xF44</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x11000011</resetValue>
                  <fields>
                    <field>
                        <name>FP_FUSED_MAC</name>
                        <description>Indicates whether the FP supports fused multiply accumulate operations. The value of this field is: 0b0001 - supported.</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>FP_HPFP</name>
                        <description>Indicates whether the FP supports half-precision floating-point conversion operations. The value of this field is: 0b0001 - supported.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>D_NAN_MODE</name>
                        <description>Indicates whether the FP hardware implementation supports only the Default NaN mode. The value of this field is: 0b0001 - hardware supports propagation of NaN values.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>FTZ_MODE</name>
                        <description>Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation. The value of this field is: 0b0001 - hardware supports full denormalized number arithmetic.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>MPU_TYPE</name>
                  <displayName>TYPE</displayName>
                  <description>MPU Type Register</description>
                  <addressOffset>0xD90</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000800</resetValue>
                  <fields>
                    <field>
                        <name>SEPARATE</name>
                        <description>Because the processor core uses only a unified MPU, SEPARATE is always 0.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>DREGION</name>
                        <description>Number of supported MPU regions field. DREGION contains 0x08 if the implementation contains an MPU indicating eight MPU regions, otherwise it contains 0x00.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>IREGION</name>
                        <description>Because the processor core uses only a unified MPU, IREGION always contains 0x00.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MPU_CTRL</name>
                  <displayName>CTRL</displayName>
                  <description>MPU Control Register</description>
                  <addressOffset>0xD94</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>MPU enable bit. Reset clears the ENABLE bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>disable MPU</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>enable MPU</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HFNMIENA</name>
                        <description>This bit enables the MPU when in Hard Fault, NMI, and FAULTMASK escalated handlers. If this bit = 1 and the ENABLE bit = 1, the MPU is enabled when in these handlers. If this bit = 0, the MPU is disabled when in these handlers, regardless of the value of ENABLE. If this bit =1 and ENABLE = 0, behavior is Unpredictable. Reset clears the HFNMIENA bit.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>PRIVDEFENA</name>
                        <description>This bit enables the default memory map for privileged access, as a background region, when the MPU is enabled. The background region acts as if it was region number 1 before any settable regions. Any region that is set up overlays this default map, and overrides it. If this bit = 0, the default memory map is disabled, and memory not covered by a region faults. This applies to memory type, Execute Never (XN), cache and shareable rules. However, this only applies to privileged mode (fetch and data access). User mode code faults unless a region has been set up for its code and data. When the MPU is disabled, the default map acts on both privileged and user mode code. XN and SO rules always apply to the System partition whether this enable is set or not. If the MPU is disabled, this bit is ignored. Reset clears the PRIVDEFENA bit.</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MPU_RNR</name>
                  <displayName>RNR</displayName>
                  <description>MPU Region Number Register</description>
                  <addressOffset>0xD98</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>REGION</name>
                        <description>Region select field. Selects the region to operate on when using the Region Attribute and Size Register and the Region Base Address Register. It must be written first except when the address VALID + REGION fields are written, which overwrites this.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MPU_RBAR</name>
                  <displayName>RBAR</displayName>
                  <description>MPU Region Base Address Register</description>
                  <addressOffset>0xD9C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>REGION</name>
                        <description>MPU region override field.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x4</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VALID</name>
                        <description>MPU Region Number valid bit.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>MPU Region Number Register remains unchanged and is interpreted.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>MPU Region Number Register is overwritten by bits 3:0 (the REGION value).</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>ADDR</name>
                        <description>Region base address field. The position of the LSB depends on the region size, so that the base address is aligned according to an even multiple of size. The power of 2 size specified by the SZENABLE field of the MPU Region Attribute and Size Register defines how many bits of base address are used.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1B</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MPU_RASR</name>
                  <displayName>RASR</displayName>
                  <description>MPU Region Attribute and Size Register</description>
                  <addressOffset>0xDA0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>ENABLE</name>
                        <description>Region enable bit.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>SIZE</name>
                        <description>MPU Protection Region Size Field.</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00100</name>
                                <description>32B</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00101</name>
                                <description>64B</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00110</name>
                                <description>128B</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00111</name>
                                <description>256B</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01000</name>
                                <description>512B</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01001</name>
                                <description>1KB</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01010</name>
                                <description>2KB</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01011</name>
                                <description>4KB</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01100</name>
                                <description>8KB</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01101</name>
                                <description>16KB</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01110</name>
                                <description>32KB</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01111</name>
                                <description>64KB</description>
                                <value>15</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10000</name>
                                <description>128KB</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10001</name>
                                <description>256KB</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10010</name>
                                <description>512KB</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10011</name>
                                <description>1MB</description>
                                <value>19</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10100</name>
                                <description>2MB</description>
                                <value>20</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10101</name>
                                <description>4MB</description>
                                <value>21</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10110</name>
                                <description>8MB</description>
                                <value>22</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10111</name>
                                <description>16MB</description>
                                <value>23</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11000</name>
                                <description>32MB</description>
                                <value>24</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11001</name>
                                <description>64MB</description>
                                <value>25</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11010</name>
                                <description>128MB</description>
                                <value>26</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11011</name>
                                <description>256MB</description>
                                <value>27</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11100</name>
                                <description>512MB</description>
                                <value>28</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11101</name>
                                <description>1GB</description>
                                <value>29</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11110</name>
                                <description>2GB</description>
                                <value>30</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b11111</name>
                                <description>4GB</description>
                                <value>31</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SRD</name>
                        <description>Sub-Region Disable (SRD) field. Setting an SRD bit disables the corresponding sub-region. Regions are split into eight equal-sized sub-regions. Sub-regions are not supported for region sizes of 128 bytes and less.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>B</name>
                        <description>Bufferable bit</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not bufferable</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>bufferable</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>C</name>
                        <description>Cacheable bit</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not cacheable</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>cacheable</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>S</name>
                        <description>Shareable bit</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>not shareable</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>shareable</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TEX</name>
                        <description>Type extension field</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>AP</name>
                        <description>Data access permission field</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x3</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b000</name>
                                <description>Priviliged permissions: No access. User permissions: No access.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b001</name>
                                <description>Priviliged permissions: Read-write. User permissions: No access.</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b010</name>
                                <description>Priviliged permissions: Read-write. User permissions: Read-only.</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b011</name>
                                <description>Priviliged permissions: Read-write. User permissions: Read-write.</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b101</name>
                                <description>Priviliged permissions: Read-only. User permissions: No access.</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b110</name>
                                <description>Priviliged permissions: Read-only. User permissions: Read-only.</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b111</name>
                                <description>Priviliged permissions: Read-only. User permissions: Read-only.</description>
                                <value>7</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>XN</name>
                        <description>Instruction access disable bit</description>
                        <bitOffset>0x1C</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>enable instruction fetches</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>disable instruction fetches</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>MPU_RBAR_A1</name>
                  <displayName>RBAR_A1</displayName>
                  <description>MPU Alias 1 Region Base Address register</description>
                  <addressOffset>0xDA4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
            </register>
            <register>
                  <name>MPU_RASR_A1</name>
                  <displayName>RASR_A1</displayName>
                  <description>MPU Alias 1 Region Attribute and Size register</description>
                  <addressOffset>0xDA8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
            </register>
            <register>
                  <name>MPU_RBAR_A2</name>
                  <displayName>RBAR_A2</displayName>
                  <description>MPU Alias 2 Region Base Address register</description>
                  <addressOffset>0xDAC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
            </register>
            <register>
                  <name>MPU_RASR_A2</name>
                  <displayName>RASR_A2</displayName>
                  <description>MPU Alias 2 Region Attribute and Size register</description>
                  <addressOffset>0xDB0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
            </register>
            <register>
                  <name>MPU_RBAR_A3</name>
                  <displayName>RBAR_A3</displayName>
                  <description>MPU Alias 3 Region Base Address register</description>
                  <addressOffset>0xDB4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>MPU_RASR_A3</name>
                  <displayName>RASR_A3</displayName>
                  <description>MPU Alias 3 Region Attribute and Size register</description>
                  <addressOffset>0xDB8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
            </register>
        </registers>
        <interrupt>
            <name>FPU_IRQ</name>
            <description>FPU Interrupt</description>
            <value>4</value>
        </interrupt>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1000</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>DHCSR</name>
                  <displayName>DHCSR</displayName>
                  <description>Debug Halting Control and Status Register</description>
                  <addressOffset>0xDF0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xfffeffff</resetMask>
                  <fields>
                    <field>
                        <name>C_DEBUGEN</name>
                        <description>Enables debug. This can only be written by AHB-AP and not by the core. It is ignored when written by the core, which cannot set or clear it. The core must write a 1 to it when writing C_HALT to halt itself.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>C_HALT</name>
                        <description>Halts the core. This bit is set automatically when the core Halts. For example Breakpoint. This bit clears on core reset. This bit can only be written if C_DEBUGEN is 1, otherwise it is ignored. When setting this bit to 1, C_DEBUGEN must also be written to 1 in the same value (value[1:0] is 2'b11). The core can halt itself, but only if C_DEBUGEN is already 1 and only if it writes with b11).</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>C_STEP</name>
                        <description>Steps the core in halted debug. When C_DEBUGEN = 0, this bit has no effect. Must only be modified when the processor is halted (S_HALT == 1).</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>C_MASKINTS</name>
                        <description>Mask interrupts when stepping or running in halted debug. Does not affect NMI, which is not maskable. Must only be modified when the processor is halted (S_HALT == 1). Also does not affect fault exceptions and SVC caused by execution of the instructions. CMASKINTS must be set or cleared before halt is released. This means that the writes to set or clear C_MASKINTS and to set or clear C_HALT must be separate.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>C_SNAPSTALL</name>
                        <description>If the core is stalled on a load/store operation the stall ceases and the instruction is forced to complete. This enables Halting debug to gain control of the core. It can only be set if: C_DEBUGEN = 1 and C_HALT = 1. The core reads S_RETIRE_ST as 0. This indicates that no instruction has advanced. This prevents misuse. The bus state is Unpredictable when this is used. S_RETIRE can detect core stalls on load/store operations.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>S_REGRDY</name>
                        <description>Register Read/Write on the Debug Core Register Selector register is available. Last transfer is complete.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>S_HALT</name>
                        <description>The core is in debug state when S_HALT is set.</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>S_SLEEP</name>
                        <description>Indicates that the core is sleeping (WFI, WFE, or SLEEP-ON-EXIT). Must use C_HALT to gain control or wait for interrupt to wake-up.</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>S_LOCKUP</name>
                        <description>Reads as one if the core is running (not halted) and a lockup condition is present.</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>S_RETIRE_ST</name>
                        <description>Indicates that an instruction has completed since last read. This is a sticky bit that clears on read. This determines if the core is stalled on a load/store or fetch.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>S_RESET_ST</name>
                        <description>Indicates that the core has been reset, or is now being reset, since the last time this bit was read. This a sticky bit that clears on read. So, reading twice and getting 1 then 0 means it was reset in the past. Reading twice and getting 1 both times means that it is being reset now (held in reset still).</description>
                        <bitOffset>0x19</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DCRSR</name>
                  <displayName>DCRSR</displayName>
                  <description>Deubg Core Register Selector Register</description>
                  <addressOffset>0xDF4</addressOffset>
                  <size>32</size>
                  <access>write-only</access>
                  <fields>
                    <field>
                        <name>REGSEL</name>
                        <description>Register select</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x5</bitWidth>
                        <access>write-only</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b00000</name>
                                <description>R0</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00001</name>
                                <description>R1</description>
                                <value>1</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00010</name>
                                <description>R2</description>
                                <value>2</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00011</name>
                                <description>R3</description>
                                <value>3</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00100</name>
                                <description>R4</description>
                                <value>4</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00101</name>
                                <description>R5</description>
                                <value>5</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00110</name>
                                <description>R6</description>
                                <value>6</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b00111</name>
                                <description>R7</description>
                                <value>7</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01000</name>
                                <description>R8</description>
                                <value>8</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01001</name>
                                <description>R9</description>
                                <value>9</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01010</name>
                                <description>R10</description>
                                <value>10</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01011</name>
                                <description>R11</description>
                                <value>11</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01100</name>
                                <description>R12</description>
                                <value>12</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01101</name>
                                <description>Current SP</description>
                                <value>13</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01110</name>
                                <description>LR</description>
                                <value>14</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b01111</name>
                                <description>DebugReturnAddress</description>
                                <value>15</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10000</name>
                                <description>xPSR/flags, execution state information, and exception number</description>
                                <value>16</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10001</name>
                                <description>MSP (Main SP)</description>
                                <value>17</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10010</name>
                                <description>PSP (Process SP)</description>
                                <value>18</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b10100</name>
                                <description>CONTROL bits [31:24], FAULTMASK bits [23:16], BASEPRI bits [15:8], PRIMASK bits [7:0]</description>
                                <value>20</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>REGWNR</name>
                        <description>Write = 1, Read = 0</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>DCRDR</name>
                  <displayName>DCRDR</displayName>
                  <description>Debug Core Register Data Register</description>
                  <addressOffset>0xDF8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
            </register>
            <register>
                  <name>DEMCR</name>
                  <displayName>DEMCR</displayName>
                  <description>Debug Exception and Monitor Control Register</description>
                  <addressOffset>0xDFC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <fields>
                    <field>
                        <name>VC_CORERESET</name>
                        <description>Reset Vector Catch. Halt running system if Core reset occurs.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VC_MMERR</name>
                        <description>Debug trap on Memory Management faults.</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VC_NOCPERR</name>
                        <description>Debug trap on Usage Fault access to Coprocessor that is not present or marked as not present in CAR register.</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VC_CHKERR</name>
                        <description>Debug trap on Usage Fault enabled checking errors.</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VC_STATERR</name>
                        <description>Debug trap on Usage Fault state errors.</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VC_BUSERR</name>
                        <description>Debug Trap on normal Bus error.</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VC_INTERR</name>
                        <description>Debug Trap on interrupt/exception service errors. These are a subset of other faults and catches before BUSERR or HARDERR.</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>VC_HARDERR</name>
                        <description>Debug trap on Hard Fault.</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MON_EN</name>
                        <description>Enable the debug monitor. When enabled, the System handler priority register controls its priority level. If disabled, then all debug events go to Hard fault. C_DEBUGEN in the Debug Halting Control and Statue register overrides this bit. Vector catching is semi-synchronous. When a matching event is seen, a Halt is requested. Because the processor can only halt on an instruction boundary, it must wait until the next instruction boundary. As a result, it stops on the first instruction of the exception handler. However, two special cases exist when a vector catch has triggered: 1. If a fault is taken during vectoring, vector read or stack push error, the halt occurs on the corresponding fault handler, for the vector error or stack push. 2. If a late arriving interrupt comes in during vectoring, it is not taken. That is, an implementation that supports the late arrival optimization must suppress it in this case.</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MON_PEND</name>
                        <description>Pend the monitor to activate when priority permits. This can wake up the monitor through the AHB-AP port. It is the equivalent to C_HALT for Monitor debug. This register does not reset on a system reset. It is only reset by a POR reset. Software in the reset handler or later, or by the DAP must enable the debug monitor.</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MON_STEP</name>
                        <description>When MON_EN = 1, this steps the core. When MON_EN = 0, this bit is ignored. This is the equivalent to C_STEP. Interrupts are only stepped according to the priority of the monitor and settings of PRIMASK, FAULTMASK, or BASEPRI.</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>MON_REQ</name>
                        <description>This enables the monitor to identify how it wakes up. This bit clears on a Core Reset.</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>en_0b0</name>
                                <description>woken up by debug exception.</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>en_0b1</name>
                                <description>woken up by MON_PEND</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>TRCENA</name>
                        <description>This bit must be set to 1 to enable use of the trace and debug blocks: Data Watchpoint and Trace (DWT), Instrumentation Trace Macrocell (ITM), Embedded Trace Macrocell (ETM), Trace Port Interface Unit (TPIU). This enables control of power usage unless tracing is required. The application can enable this, for ITM use, or use by a debugger. Note that if no debug or trace components are present in the implementation then it is not possible to set TRCENA.</description>
                        <bitOffset>0x18</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>RSTCTL</name>
        <version>356.0</version>
        <description>RSTCTL</description>
        <baseAddress>0xE0042000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x128</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>RSTCTL_RESET_REQ</name>
                  <displayName>RESET_REQ</displayName>
                  <description>Reset Request Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffff00fc</resetMask>
                  <fields>
                    <field>
                        <name>SOFT_REQ</name>
                        <description>Soft Reset request</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>HARD_REQ</name>
                        <description>Hard Reset request</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>RSTKEY</name>
                        <description>Write key to unlock reset request bits</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_HARDRESET_STAT</name>
                  <displayName>HARDRESET_STAT</displayName>
                  <description>Hard Reset Status Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SRC0</name>
                        <description>Indicates that SRC0 was the source of the Hard Reset</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC1</name>
                        <description>Indicates that SRC1 was the source of the Hard Reset</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC2</name>
                        <description>Indicates that SRC2 was the source of the Hard Reset</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC3</name>
                        <description>Indicates that SRC3 was the source of the Hard Reset</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC4</name>
                        <description>Indicates that SRC4 was the source of the Hard Reset</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC5</name>
                        <description>Indicates that SRC5 was the source of the Hard Reset</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC6</name>
                        <description>Indicates that SRC6 was the source of the Hard Reset</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC7</name>
                        <description>Indicates that SRC7 was the source of the Hard Reset</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC8</name>
                        <description>Indicates that SRC8 was the source of the Hard Reset</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC9</name>
                        <description>Indicates that SRC9 was the source of the Hard Reset</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC10</name>
                        <description>Indicates that SRC10 was the source of the Hard Reset</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC11</name>
                        <description>Indicates that SRC11 was the source of the Hard Reset</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC12</name>
                        <description>Indicates that SRC12 was the source of the Hard Reset</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC13</name>
                        <description>Indicates that SRC13 was the source of the Hard Reset</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC14</name>
                        <description>Indicates that SRC14 was the source of the Hard Reset</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC15</name>
                        <description>Indicates that SRC15 was the source of the Hard Reset</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_HARDRESET_CLR</name>
                  <displayName>HARDRESET_CLR</displayName>
                  <description>Hard Reset Status Clear Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffff0000</resetMask>
                  <fields>
                    <field>
                        <name>SRC0</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC1</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC2</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC3</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC4</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC5</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC6</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC7</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC8</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC9</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC10</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC11</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC12</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC13</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC14</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HARDRESET_STAT</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC15</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_HRDRESETSTAT_REG</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_HARDRESET_SET</name>
                  <displayName>HARDRESET_SET</displayName>
                  <description>Hard Reset Status Set Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SRC0</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC1</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC2</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC3</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC4</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC5</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC6</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC7</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC8</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC9</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC10</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC11</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC12</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC13</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC14</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC15</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_HARDRESET_STAT (and initiates a Hard Reset)</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_SOFTRESET_STAT</name>
                  <displayName>SOFTRESET_STAT</displayName>
                  <description>Soft Reset Status Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SRC0</name>
                        <description>If 1, indicates that SRC0 was the source of the Soft Reset</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC1</name>
                        <description>If 1, indicates that SRC1 was the source of the Soft Reset</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC2</name>
                        <description>If 1, indicates that SRC2 was the source of the Soft Reset</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC3</name>
                        <description>If 1, indicates that SRC3 was the source of the Soft Reset</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC4</name>
                        <description>If 1, indicates that SRC4 was the source of the Soft Reset</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC5</name>
                        <description>If 1, indicates that SRC5 was the source of the Soft Reset</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC6</name>
                        <description>If 1, indicates that SRC6 was the source of the Soft Reset</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC7</name>
                        <description>If 1, indicates that SRC7 was the source of the Soft Reset</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC8</name>
                        <description>If 1, indicates that SRC8 was the source of the Soft Reset</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC9</name>
                        <description>If 1, indicates that SRC9 was the source of the Soft Reset</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC10</name>
                        <description>If 1, indicates that SRC10 was the source of the Soft Reset</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC11</name>
                        <description>If 1, indicates that SRC11 was the source of the Soft Reset</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC12</name>
                        <description>If 1, indicates that SRC12 was the source of the Soft Reset</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC13</name>
                        <description>If 1, indicates that SRC13 was the source of the Soft Reset</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC14</name>
                        <description>If 1, indicates that SRC14 was the source of the Soft Reset</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SRC15</name>
                        <description>If 1, indicates that SRC15 was the source of the Soft Reset</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_SOFTRESET_CLR</name>
                  <displayName>SOFTRESET_CLR</displayName>
                  <description>Soft Reset Status Clear Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SRC0</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC1</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC2</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC3</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC4</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC5</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC6</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC7</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC8</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC9</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC10</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC11</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC12</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC13</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC14</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC15</name>
                        <description>Write 1 clears the corresponding bit in the RSTCTL_SOFTRESET_STAT</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_SOFTRESET_SET</name>
                  <displayName>SOFTRESET_SET</displayName>
                  <description>Soft Reset Status Set Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SRC0</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC1</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC2</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC3</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC4</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC5</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC6</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC7</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC8</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC9</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC10</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC11</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC12</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC13</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC14</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>SRC15</name>
                        <description>Write 1 sets the corresponding bit in the RSTCTL_SOFTRESET_STAT (and initiates a Soft Reset)</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_PSSRESET_STAT</name>
                  <displayName>PSSRESET_STAT</displayName>
                  <description>PSS Reset Status Register</description>
                  <addressOffset>0x100</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x0000000f</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>SVSMH</name>
                        <description>Indicates if POR was caused by an SVSMH trip condition int the PSS</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>BGREF</name>
                        <description>Indicates if POR was caused by a BGREF not okay condition in the PSS</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>VCCDET</name>
                        <description>Indicates if POR was caused by a VCCDET trip condition in the PSS</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SVSL</name>
                        <description>Indicates if POR was caused by an SVSL trip condition in the PSS</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_PSSRESET_CLR</name>
                  <displayName>PSSRESET_CLR</displayName>
                  <description>PSS Reset Status Clear Register</description>
                  <addressOffset>0x104</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Write 1 clears all PSS Reset Flags in the RSTCTL_PSSRESET_STAT</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_PCMRESET_STAT</name>
                  <displayName>PCMRESET_STAT</displayName>
                  <description>PCM Reset Status Register</description>
                  <addressOffset>0x108</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>LPM35</name>
                        <description>Indicates if POR was caused by PCM due to an exit from LPM3.5</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>LPM45</name>
                        <description>Indicates if POR was caused by PCM due to an exit from LPM4.5</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_PCMRESET_CLR</name>
                  <displayName>PCMRESET_CLR</displayName>
                  <description>PCM Reset Status Clear Register</description>
                  <addressOffset>0x10C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Write 1 clears all PCM Reset Flags in the RSTCTL_PCMRESET_STAT</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_PINRESET_STAT</name>
                  <displayName>PINRESET_STAT</displayName>
                  <description>Pin Reset Status Register</description>
                  <addressOffset>0x110</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>RSTNMI</name>
                        <description>POR was caused by RSTn/NMI pin based reset event</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_PINRESET_CLR</name>
                  <displayName>PINRESET_CLR</displayName>
                  <description>Pin Reset Status Clear Register</description>
                  <addressOffset>0x114</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Write 1 clears the RSTn/NMI Pin Reset Flag in RSTCTL_PINRESET_STAT</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_REBOOTRESET_STAT</name>
                  <displayName>REBOOTRESET_STAT</displayName>
                  <description>Reboot Reset Status Register</description>
                  <addressOffset>0x118</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>REBOOT</name>
                        <description>Indicates if Reboot reset was caused by the SYSCTL module.</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_REBOOTRESET_CLR</name>
                  <displayName>REBOOTRESET_CLR</displayName>
                  <description>Reboot Reset Status Clear Register</description>
                  <addressOffset>0x11C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Write 1 clears the Reboot Reset Flag in RSTCTL_REBOOTRESET_STAT</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_CSRESET_STAT</name>
                  <displayName>CSRESET_STAT</displayName>
                  <description>CS Reset Status Register</description>
                  <addressOffset>0x120</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>DCOR_SHT</name>
                        <description>Indicates if POR was caused by DCO short circuit fault in the external resistor mode</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>RSTCTL_CSRESET_CLR</name>
                  <displayName>CSRESET_CLR</displayName>
                  <description>CS Reset Status Clear Register</description>
                  <addressOffset>0x124</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CLR</name>
                        <description>Write 1 clears the DCOR_SHT Flag in RSTCTL_CSRESET_STAT as well as DCOR_SHTIFG flag in CSIFG register of clock system</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
    <peripheral>
        <name>SYSCTL</name>
        <version>356.0</version>
        <description>SYSCTL</description>
        <baseAddress>0xE0043000</baseAddress>
        <addressBlock>
            <offset>0x0</offset>
            <size>0x1028</size>
            <usage>registers</usage>
        </addressBlock>
        <registers>
            <register>
                  <name>SYS_REBOOT_CTL</name>
                  <displayName>REBOOT_CTL</displayName>
                  <description>Reboot Control Register</description>
                  <addressOffset>0x0</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x000000fe</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>REBOOT</name>
                        <description>Write 1 initiates a Reboot of the device</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>WKEY</name>
                        <description>Key to enable writes to bit 0</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_NMI_CTLSTAT</name>
                  <displayName>NMI_CTLSTAT</displayName>
                  <description>NMI Control and Status Register</description>
                  <addressOffset>0x4</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000007</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>CS_SRC</name>
                        <description>CS interrupt as a source of NMI</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>CS_SRC_0</name>
                                <description>Disables CS interrupt as a source of NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CS_SRC_1</name>
                                <description>Enables CS interrupt as a source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PSS_SRC</name>
                        <description>PSS interrupt as a source of NMI</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PSS_SRC_0</name>
                                <description>Disables the PSS interrupt as a source of NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSS_SRC_1</name>
                                <description>Enables the PSS interrupt as a source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PCM_SRC</name>
                        <description>PCM interrupt as a source of NMI</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PCM_SRC_0</name>
                                <description>Disbles the PCM interrupt as a source of NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PCM_SRC_1</name>
                                <description>Enables the PCM interrupt as a source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PIN_SRC</name>
                        <description>RSTn/NMI pin configuration
Note: When the device enters LPM3/LPM4 modes of operation, the functionality selected by this bit is retained. If selected as an NMI, activity on this pin in 
LPM3/LPM4 wakes the device and processes the interrupt, without causing a POR. If selected as a Reset, activity on this pin in LPM3/LPM4 causes a device-level POR
When the device enters LPM3.5/LPM4.5 modes of operation, this bit is always cleared to 0. In other words, the RSTn/NMI pin always assumes a reset functionality in LPM3.5/LPM4.5 modes.</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PIN_SRC_0</name>
                                <description>Configures the RSTn_NMI pin as a source of POR Class Reset</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PIN_SRC_1</name>
                                <description>Configures the RSTn_NMI pin as a source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>CS_FLG</name>
                        <description>CS interrupt was the source of NMI</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>CS_FLG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>CS_FLG_0</name>
                                <description>indicates CS interrupt was not the source of NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>CS_FLG_1</name>
                                <description>indicates CS interrupt was the source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PSS_FLG</name>
                        <description>PSS interrupt was the source of NMI</description>
                        <bitOffset>0x11</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>PSS_FLG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>PSS_FLG_0</name>
                                <description>indicates the PSS interrupt was not the source of NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PSS_FLG_1</name>
                                <description>indicates the PSS interrupt was the source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PCM_FLG</name>
                        <description>PCM interrupt was the source of NMI</description>
                        <bitOffset>0x12</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>PCM_FLG_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>PCM_FLG_0</name>
                                <description>indicates the PCM interrupt was not the source of NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PCM_FLG_1</name>
                                <description>indicates the PCM interrupt was the source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>PIN_FLG</name>
                        <description>RSTn/NMI pin was the source of NMI</description>
                        <bitOffset>0x13</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>PIN_FLG_0</name>
                                <description>Indicates the RSTn_NMI pin was not the source of NMI</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>PIN_FLG_1</name>
                                <description>Indicates the RSTn_NMI pin was the source of NMI</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_WDTRESET_CTL</name>
                  <displayName>WDTRESET_CTL</displayName>
                  <description>Watchdog Reset Control Register</description>
                  <addressOffset>0x8</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000003</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>TIMEOUT</name>
                        <description>WDT timeout reset type</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>TIMEOUT_0</name>
                                <description>WDT timeout event generates Soft reset</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>TIMEOUT_1</name>
                                <description>WDT timeout event generates Hard reset</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>VIOLATION</name>
                        <description>WDT password violation reset type</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>VIOLATION_0</name>
                                <description>WDT password violation event generates Soft reset</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>VIOLATION_1</name>
                                <description>WDT password violation event generates Hard reset</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_PERIHALT_CTL</name>
                  <displayName>PERIHALT_CTL</displayName>
                  <description>Peripheral Halt Control Register</description>
                  <addressOffset>0xC</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00004000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>HALT_T16_0</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_T16_0_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_T16_0_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_T16_1</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_T16_1_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_T16_1_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_T16_2</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_T16_2_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_T16_2_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_T16_3</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_T16_3_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_T16_3_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_T32_0</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_T32_0_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_T32_0_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUA0</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUA0_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUA0_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUA1</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUA1_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUA1_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUA2</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUA2_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUA2_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUA3</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUA3_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUA3_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUB0</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUB0_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUB0_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUB1</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUB1_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUB1_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUB2</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0xB</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUB2_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUB2_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_eUB3</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0xC</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_eUB3_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_eUB3_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_ADC</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0xD</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_ADC_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_ADC_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_WDT</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0xE</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_WDT_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_WDT_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>HALT_DMA</name>
                        <description>Freezes IP operation when CPU is halted</description>
                        <bitOffset>0xF</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>HALT_DMA_0</name>
                                <description>IP operation unaffected when CPU is halted</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>HALT_DMA_1</name>
                                <description>freezes IP operation when CPU is halted</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_SRAM_SIZE</name>
                  <displayName>SRAM_SIZE</displayName>
                  <description>SRAM Size Register</description>
                  <addressOffset>0x10</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SIZE</name>
                        <description>Indicates the size of SRAM on the device</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_SRAM_BANKEN</name>
                  <displayName>SRAM_BANKEN</displayName>
                  <description>SRAM Bank Enable Register</description>
                  <addressOffset>0x14</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x000000ff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>BNK0_EN</name>
                        <description>SRAM Bank0 enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>BNK1_EN</name>
                        <description>SRAM Bank1 enable</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK1_EN_0</name>
                                <description>Disables Bank1 of the SRAM</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK1_EN_1</name>
                                <description>Enables Bank1 of the SRAM</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK2_EN</name>
                        <description>SRAM Bank1 enable</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK2_EN_0</name>
                                <description>Disables Bank2 of the SRAM</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK2_EN_1</name>
                                <description>Enables Bank2 of the SRAM</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK3_EN</name>
                        <description>SRAM Bank1 enable</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK3_EN_0</name>
                                <description>Disables Bank3 of the SRAM</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK3_EN_1</name>
                                <description>Enables Bank3 of the SRAM</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK4_EN</name>
                        <description>SRAM Bank1 enable</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK4_EN_0</name>
                                <description>Disables Bank4 of the SRAM</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK4_EN_1</name>
                                <description>Enables Bank4 of the SRAM</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK5_EN</name>
                        <description>SRAM Bank1 enable</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK5_EN_0</name>
                                <description>Disables Bank5 of the SRAM</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK5_EN_1</name>
                                <description>Enables Bank5 of the SRAM</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK6_EN</name>
                        <description>SRAM Bank1 enable</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK6_EN_0</name>
                                <description>Disables Bank6 of the SRAM</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK6_EN_1</name>
                                <description>Enables Bank6 of the SRAM</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK7_EN</name>
                        <description>SRAM Bank1 enable</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK7_EN_0</name>
                                <description>Disables Bank7 of the SRAM</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK7_EN_1</name>
                                <description>Enables Bank7 of the SRAM</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SRAM_RDY</name>
                        <description>SRAM ready</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>SRAM_RDY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SRAM_RDY_0</name>
                                <description>SRAM is not ready for accesses. Banks are undergoing an enable or disable sequence, and reads or writes to SRAM are stalled until the banks are ready</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SRAM_RDY_1</name>
                                <description>SRAM is ready for accesses. All SRAM banks are enabled/disabled according to values of bits 7:0 of this register</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_SRAM_BANKRET</name>
                  <displayName>SRAM_BANKRET</displayName>
                  <description>SRAM Bank Retention Control Register</description>
                  <addressOffset>0x18</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x000000ff</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>BNK0_RET</name>
                        <description>Bank0 retention</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>BNK1_RET</name>
                        <description>Bank1 retention</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK1_RET_0</name>
                                <description>Bank1 of the SRAM is not retained in LPM3 or LPM4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK1_RET_1</name>
                                <description>Bank1 of the SRAM is retained in LPM3 and LPM4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK2_RET</name>
                        <description>Bank2 retention</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK2_RET_0</name>
                                <description>Bank2 of the SRAM is not retained in LPM3 or LPM4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK2_RET_1</name>
                                <description>Bank2 of the SRAM is retained in LPM3 and LPM4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK3_RET</name>
                        <description>Bank3 retention</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK3_RET_0</name>
                                <description>Bank3 of the SRAM is not retained in LPM3 or LPM4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK3_RET_1</name>
                                <description>Bank3 of the SRAM is retained in LPM3 and LPM4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK4_RET</name>
                        <description>Bank4 retention</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK4_RET_0</name>
                                <description>Bank4 of the SRAM is not retained in LPM3 or LPM4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK4_RET_1</name>
                                <description>Bank4 of the SRAM is retained in LPM3 and LPM4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK5_RET</name>
                        <description>Bank5 retention</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK5_RET_0</name>
                                <description>Bank5 of the SRAM is not retained in LPM3 or LPM4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK5_RET_1</name>
                                <description>Bank5 of the SRAM is retained in LPM3 and LPM4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK6_RET</name>
                        <description>Bank6 retention</description>
                        <bitOffset>0x6</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK6_RET_0</name>
                                <description>Bank6 of the SRAM is not retained in LPM3 or LPM4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK6_RET_1</name>
                                <description>Bank6 of the SRAM is retained in LPM3 and LPM4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>BNK7_RET</name>
                        <description>Bank7 retention</description>
                        <bitOffset>0x7</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>BNK7_RET_0</name>
                                <description>Bank7 of the SRAM is not retained in LPM3 or LPM4</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>BNK7_RET_1</name>
                                <description>Bank7 of the SRAM is retained in LPM3 and LPM4</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                    <field>
                        <name>SRAM_RDY</name>
                        <description>SRAM ready</description>
                        <bitOffset>0x10</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                        <enumeratedValues>
                            <name>SRAM_RDY_enum_read</name>
                            <usage>read</usage>
                            <enumeratedValue>
                                <name>SRAM_RDY_0</name>
                                <description>SRAM banks are being set up for retention. Entry into LPM3, LPM4 should not be attempted until this bit is set to 1</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>SRAM_RDY_1</name>
                                <description>SRAM is ready for accesses. All SRAM banks are enabled/disabled for retention according to values of bits 7:0 of this register</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_FLASH_SIZE</name>
                  <displayName>FLASH_SIZE</displayName>
                  <description>Flash Size Register</description>
                  <addressOffset>0x20</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>SIZE</name>
                        <description>Flash User Region size</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_DIO_GLTFLT_CTL</name>
                  <displayName>DIO_GLTFLT_CTL</displayName>
                  <description>Digital I/O Glitch Filter Control Register</description>
                  <addressOffset>0x30</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000001</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>GLTCH_EN</name>
                        <description>Glitch filter enable</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                        <enumeratedValues>
                            <enumeratedValue>
                                <name>GLTCH_EN_0</name>
                                <description>Disables glitch filter on the digital I/Os</description>
                                <value>0</value>
                            </enumeratedValue>
                            <enumeratedValue>
                                <name>GLTCH_EN_1</name>
                                <description>Enables glitch filter on the digital I/Os</description>
                                <value>1</value>
                            </enumeratedValue>
                        </enumeratedValues>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_SECDATA_UNLOCK</name>
                  <displayName>SECDATA_UNLOCK</displayName>
                  <description>IP Protected Secure Zone Data Access Unlock Register</description>
                  <addressOffset>0x40</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>UNLKEY</name>
                        <description>Unlock key</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_MASTER_UNLOCK</name>
                  <displayName>MASTER_UNLOCK</displayName>
                  <description>Master Unlock Register</description>
                  <addressOffset>0x1000</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>UNLKEY</name>
                        <description>Unlock Key</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x10</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <dim>2</dim>
                  <dimIncrement>4</dimIncrement>
                  <dimIndex>0,1</dimIndex>
                  <name>SYS_BOOTOVER_REQ[%s]</name>
                  <displayName>BOOTOVER_REQ[%s]</displayName>
                  <description>Boot Override Request Register</description>
                  <addressOffset>0x1004</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>REGVAL</name>
                        <description>Value set by debugger, read and clear by the CPU</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_BOOTOVER_ACK</name>
                  <displayName>BOOTOVER_ACK</displayName>
                  <description>Boot Override Acknowledge Register</description>
                  <addressOffset>0x100C</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0xffffffff</resetMask>
                  <fields>
                    <field>
                        <name>REGVAL</name>
                        <description>Value set by CPU, read/clear by the debugger</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x20</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_RESET_REQ</name>
                  <displayName>RESET_REQ</displayName>
                  <description>Reset Request Register</description>
                  <addressOffset>0x1010</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <fields>
                    <field>
                        <name>POR</name>
                        <description>Generate POR</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>REBOOT</name>
                        <description>Generate Reboot_Reset</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>write-only</access>
                    </field>
                    <field>
                        <name>WKEY</name>
                        <description>Write key</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x8</bitWidth>
                        <access>write-only</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_RESET_STATOVER</name>
                  <displayName>RESET_STATOVER</displayName>
                  <description>Reset Status and Override Register</description>
                  <addressOffset>0x1014</addressOffset>
                  <size>32</size>
                  <access>read-write</access>
                  <resetValue>0x00000000</resetValue>
                  <resetMask>0x00000700</resetMask>
                  <fields>
                    <field>
                        <name>SOFT</name>
                        <description>Indicates if SOFT Reset is active</description>
                        <bitOffset>0x0</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>HARD</name>
                        <description>Indicates if HARD Reset is active</description>
                        <bitOffset>0x1</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>REBOOT</name>
                        <description>Indicates if Reboot Reset is active</description>
                        <bitOffset>0x2</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>SOFT_OVER</name>
                        <description>SOFT_Reset overwrite request</description>
                        <bitOffset>0x8</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>HARD_OVER</name>
                        <description>HARD_Reset overwrite request</description>
                        <bitOffset>0x9</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                    <field>
                        <name>RBT_OVER</name>
                        <description>Reboot Reset overwrite request</description>
                        <bitOffset>0xA</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-write</access>
                    </field>
                  </fields>
            </register>
            <register>
                  <name>SYS_SYSTEM_STAT</name>
                  <displayName>SYSTEM_STAT</displayName>
                  <description>System Status Register</description>
                  <addressOffset>0x1020</addressOffset>
                  <size>32</size>
                  <access>read-only</access>
                  <fields>
                    <field>
                        <name>DBG_SEC_ACT</name>
                        <description>Debug Security active</description>
                        <bitOffset>0x3</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>JTAG_SWD_LOCK_ACT</name>
                        <description>Indicates if JTAG and SWD Lock is active</description>
                        <bitOffset>0x4</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                    <field>
                        <name>IP_PROT_ACT</name>
                        <description>Indicates if IP protection is active</description>
                        <bitOffset>0x5</bitOffset>
                        <bitWidth>0x1</bitWidth>
                        <access>read-only</access>
                    </field>
                  </fields>
            </register>
        </registers>
    </peripheral>
   </peripherals>
</device>