51 lines
1.6 KiB
TOML
51 lines
1.6 KiB
TOML
[default.probe]
|
|
# USB vendor ID
|
|
# usb_vid = "1337"
|
|
# USB product ID
|
|
# usb_pid = "1337"
|
|
# Serial number
|
|
# serial = "12345678"
|
|
# The protocol to be used for communicating with the target.
|
|
protocol = "Swd"
|
|
# The speed in kHz of the data link to the target.
|
|
# speed = 1337
|
|
|
|
[default.flashing]
|
|
# Whether or not the target should be flashed.
|
|
enabled = true
|
|
# Whether or not the target should be halted after flashing.
|
|
halt_afterwards = false
|
|
# Whether or not bytes erased but not rewritten with data from the ELF
|
|
# should be restored with their contents before erasing.
|
|
restore_unwritten_bytes = false
|
|
# The path where an SVG of the assembled flash layout should be written to.
|
|
# flash_layout_output_path = "out.svg"
|
|
|
|
[default.general]
|
|
# The chip name of the chip to be debugged.
|
|
chip = "stm32f103C8"
|
|
# A list of chip descriptions to be loaded during runtime.
|
|
chip_descriptions = []
|
|
# The default log level to be used.
|
|
log_level = "Warn"
|
|
|
|
[default.rtt]
|
|
# Whether or not an RTTUI should be opened after flashing.
|
|
# This is exclusive and cannot be used with GDB at the moment.
|
|
enabled = true
|
|
# A list of channel associations to be displayed. If left empty, all channels are displayed.
|
|
channels = [
|
|
# { up = 0, down = 0, name = "name" }
|
|
]
|
|
# The duration in ms for which the logger should retry to attach to RTT.
|
|
timeout = 3000
|
|
# Whether timestamps in the RTTUI are enabled
|
|
show_timestamps = true
|
|
|
|
[default.gdb]
|
|
# Whether or not a GDB server should be opened after flashing.
|
|
# This is exclusive and cannot be used with RTT at the moment.
|
|
enabled = false
|
|
# The connection string in host:port format wher the GDB server will open a socket.
|
|
# gdb_connection_string
|