Initial commit

.cargo/config

@@ -0,0 +1,25 @@
+[target.thumbv7m-none-eabi]
+# uncomment ONE of these three option to make `cargo run` start a GDB session
+# which option to pick depends on your system
+# runner = "arm-none-eabi-gdb -q -x openocd.gdb"
+runner = "gdb-multiarch"
+# runner = "gdb -q -x openocd.gdb"
+
+rustflags = [
+  # LLD (shipped with the Rust toolchain) is used as the default linker
+  "-C", "link-arg=-Tlink.x",
+
+  # if you run into problems with LLD switch to the GNU linker by commenting out
+  # this line
+  # "-C", "linker=arm-none-eabi-ld",
+
+  # if you need to link to pre-compiled C libraries provided by a C toolchain
+  # use GCC as the linker by commenting out both lines above and then
+  # uncommenting the three lines below
+  # "-C", "linker=arm-none-eabi-gcc",
+  # "-C", "link-arg=-Wl,-Tlink.x",
+  # "-C", "link-arg=-nostartfiles",
+]
+
+[build]
+target = "thumbv7m-none-eabi"    # Cortex-M3